Search Results (8)

Coffee demand continues to rise, while producing countries face increasing challenges and yield losses due to climate change. In response, farmers are adopting agricultural practices capable of boosting productivity. However, these practices increase intercrop variability, making coffee mapping more challenging. In this study, a novel approach is proposed to identify coffee cultivation considering four phenological stages: planting (PL), producing (PR), skeleton pruning (SK), and renovation with stumping (ST). A hierarchical classification framework was designed to isolate coffee pixels and identify their respective stages in one of Brazil’s most important coffee-producing regions. A dense time series of multispectral bands, spectral indices, and texture metrics derived from Harmonized Landsat Sentinel-2 (HLS) imagery, with an average revisit time of ~3 days, was employed. This data was combined with an ensemble learning approach based on decision-tree algorithms, specifically Random Forest (RF) and Extreme Gradient Boosting (XGBoost). The results achieved unprecedented sensitivity and specificity for coffee plantation detection with RF, consistently exceeding 95%. The classification of coffee phenological stages showed balanced accuracies of 77% (ST) and from 93% to 95% for the other classes. These findings are promising and provide a scalable framework to monitor climate-resilient coffee management practices. Full article

The fraction of absorbed photosynthetically active radiation (FAPAR) stands as a pivotal parameter within the Earth system, quantifying the energy exchange between vegetation and solar radiation. Accordingly, there is an urgent need for comprehensive validation studies to accurately quantify uncertainties and improve the reliability of FAPAR-based applications. This study validated five global FAPAR products, MOD15A2H, MYD15A2H, VNP15A2H, GEOV2, and GEOV3, over four boreal forest sites in North America. Qualitative quality flags (QQFs) and quantitative quality indicators (QQIs) of each product were analyzed. Time series high-resolution reference FAPAR maps were developed using the Harmonized Landsat and Sentinel-2 dataset. The reference FAPAR maps revealed a strong agreement with the in situ FAPAR from AmeriFlux (correlation coefficient (R) = 0.91; root mean square error (RMSE) = 0.06). The results revealed that global FAPAR products show similar uncertainties (RMSE: 0.16 ± 0.04) and moderate agreement with the reference FAPAR (R = 0.75 ± 0.10). On average, 34.47 ± 6.91% of the FAPAR data met the goal requirements of the Global Climate Observing System (GCOS), while 54.41 ± 6.89% met the threshold requirements of the GCOS. Deciduous forests perform better than evergreen forests, and the products tend to underestimate the reference data, especially for the beginning and end of growing seasons in evergreen forests. There are no obvious quality differences at different QQFs, and the relative QQI can be used to filter high-quality values. To enhance the regional applicability of global FAPAR products, further algorithm improvements and expanded validation efforts are essential. Full article

Southern U.S. forests are essential for carbon storage and timber production but are increasingly impacted by natural disturbances, highlighting the need to understand their dynamics and recovery. Canopy cover is a key indicator of forest health and resilience. Advances in remote sensing, such as NASA’s GEDI spaceborne LiDAR, enable more precise mapping of canopy cover. Although GEDI provides accurate data, its limited spatial coverage restricts large-scale assessments. To address this, we combined GEDI with Synthetic Aperture Radar (SAR), and optical imagery (Sentinel-1 GRD and Landsat–Sentinel Harmonized (HLS)) data to create a comprehensive canopy cover map for Florida. Using a random forest algorithm, our model achieved an R² of 0.69, RMSD of 0.17, and MD of 0.001, based on out-of-bag samples for internal validation. Geographic coordinates and the red spectral channel emerged as the most influential predictors. External validation with airborne laser scanning (ALS) data across three sites yielded an R² of 0.70, RMSD of 0.29, and MD of −0.22, confirming the model’s accuracy and robustness in unseen areas. Statewide analysis showed lower canopy cover in southern versus northern Florida, with wetland forests exhibiting higher cover than upland sites. This study demonstrates the potential of integrating multiple remote sensing datasets to produce accurate vegetation maps, supporting forest management and sustainability efforts in Florida. Full article

Savannas are widespread biomes with highly valued ecosystem services. To successfully manage savannas in the future, it is critical to better understand the long-term dynamics of their productivity and phenology. However, accurate large-scale gross primary productivity (GPP) estimation remains challenging because of the high spatial and seasonal variations in savanna GPP. China’s savanna ecosystems constitute only a small part of the world’s savanna ecosystems and are ecologically fragile. However, studies on GPP and phenological changes, while closely related to climate change, remain scarce. Therefore, we simulated savanna ecosystem GPP via a satellite-based vegetation photosynthesis model (VPM) with fine-resolution harmonized Landsat and Sentinel-2 (HLS) imagery and derived savanna phenophases from phenocam images. From 2015 to 2018, we compared the GPP from HLS VPM (GPP_HLS-VPM) simulations and that from Moderate-Resolution Imaging Spectroradiometer (MODIS) VPM simulations (GPP_MODIS-VPM) with GPP estimates from an eddy covariance (EC) flux tower (GPP_EC) in Yuanjiang, China. Moreover, the consistency of the savanna ecosystem GPP was validated for a conventional MODIS product (MOD17A2). This study clearly revealed the potential of the HLS VPM for estimating savanna GPP. Compared with the MODIS VPM, the HLS VPM yielded more accurate GPP estimates with lower root-mean-square errors (RMSEs) and slopes closer to 1:1. Specifically, the annual RMSE values for the HLS VPM were 1.54 (2015), 2.65 (2016), 2.64 (2017), and 1.80 (2018), whereas those for the MODIS VPM were 3.04, 3.10, 2.62, and 2.49, respectively. The HLS VPM slopes were 1.12, 1.80, 1.65, and 1.27, indicating better agreement with the EC data than the MODIS VPM slopes of 2.04, 2.51, 2.14, and 1.54, respectively. Moreover, HLS VPM suitably indicated GPP dynamics during all phenophases, especially during the autumn green-down period. As the first study that simulates GPP involving HLS VPM and compares satellite-based and EC flux observations of the GPP in Chinese savanna ecosystems, our study enables better exploration of the Chinese savanna ecosystem GPP during different phenophases and more effective savanna management and conservation worldwide. Full article

Accurate and frequent monitoring of evapotranspiration (ET) at sub-field scales can provide valuable information for agricultural water management, quantifying crop water use and stress toward the goal of increasing crop water use efficiency and production. Using land-surface temperature (LST) data retrieved from Landsat thermal infrared (TIR) imagery, along with surface reflectance data describing albedo and vegetation cover fraction, surface energy balance models can generate ET maps down to a 30 m spatial resolution. However, the temporal sampling by such maps can be limited by the relatively infrequent revisit period of Landsat data (8 days for combined Landsats 7 and 8), especially in cloudy areas experiencing rapid changes in moisture status. The Sentinel-2 (S2) satellites, as a good complement to the Landsat system, provide surface reflectance data at 10–20 m spatial resolution and 5 day revisit period but do not have a thermal sensor. On the other hand, the Visible Infrared Imaging Radiometer Suite (VIIRS) provides TIR data on a near-daily basis with 375 m resolution, which can be refined through thermal sharpening using S2 reflectances. This study assesses the utility of augmenting the Harmonized Landsat and Sentinel-2 (HLS) dataset with S2-sharpened VIIRS as a thermal proxy source on S2 overpass days, enabling 30 m ET mapping at a potential combined frequency of 2–3 days (including Landsat). The value added by including VIIRS-S2 is assessed both retrospectively and operationally in comparison with flux tower observations collected from several U.S. agricultural sites covering a range of crop types. In particular, we evaluate the performance of VIIRS-S2 ET estimates as a function of VIIRS view angle and cloud masking approach. VIIRS-S2 ET retrievals (MAE of 0.49 mm d⁻¹ against observations) generally show comparable accuracy to Landsat ET (0.45 mm d⁻¹) on days of commensurate overpass, but with decreasing performance at large VIIRS view angles. Low-quality VIIRS-S2 ET retrievals linked to imperfect VIIRS/S2 cloud masking are also discussed, and caution is required when applying such data for generating ET timeseries. Fused daily ET time series benefited during the peak growing season from the improved multi-source temporal sampling afforded by VIIRS-S2, particularly in cloudy regions and over surfaces with rapidly changing vegetation conditions, and value added for real-time monitoring applications is discussed. This work demonstrates the utility and feasibility of augmenting the HLS dataset with sharpened VIIRS TIR imagery on S2 overpass dates for generating high spatiotemporal resolution ET products. Full article

Crop yield monitoring is an important component in agricultural assessment. Multi-spectral remote sensing instruments onboard space-borne platforms such as Advanced Very High Resolution Radiometer (AVHRR), Moderate Resolution Imaging Spectroradiometer (MODIS), and Visible Infrared Imaging Radiometer Suite (VIIRS) have shown to be useful for efficiently generating timely and synoptic information on the yield status of crops across regional levels. However, the coarse spatial resolution data inherent to these sensors provides little utility at the management level. Recent satellite imagery collection advances toward finer spatial resolution (down to 1 m) alongside increased observational cadence (near daily) implies information on crops obtainable at field and within-field scales to support farming needs is now possible. To test this premise, we focus on assessing the efficiency of multiple satellite sensors, namely WorldView-3, Planet/Dove-Classic, Sentinel-2, and Landsat 8 (through Harmonized Landsat Sentinel-2 (HLS)), and investigate their spatial, spectral (surface reflectance (SR) and vegetation indices (VIs)), and temporal characteristics to estimate corn and soybean yields at sub-field scales within study sites in the US state of Iowa. Precision yield data as referenced to combine harvesters’ GPS systems were used for validation. We show that imagery spatial resolution of 3 m is critical to explaining 100% of the within-field yield variability for corn and soybean. Our simulation results show that moving to coarser resolution data of 10 m, 20 m, and 30 m reduced the explained variability to 86%, 72%, and 59%, respectively. We show that the most important spectral bands explaining yield variability were green (0.560 μm), red-edge (0.726 μm), and near-infrared (NIR − 0.865 μm). Furthermore, the high temporal frequency of Planet and a combination of Sentinel-2/Landsat 8 (HLS) data allowed for optimal date selection for yield map generation. Overall, we observed mixed performance of satellite-derived models with the coefficient of determination (R²) varying from 0.21 to 0.88 (averaging 0.56) for the 30 m HLS and from 0.09 to 0.77 (averaging 0.30) for 3 m Planet. R² was lower for fields with higher yields, suggesting saturation of the satellite-collected reflectance features in those cases. Therefore, other biophysical variables, such as soil moisture and evapotranspiration, at similar fine spatial resolutions are likely needed alongside the optical imagery to fully explain the yields. Full article

Leaf area index (LAI) is an essential indicator of crop development and growth. For many agricultural applications, satellite-based LAI estimates at the farm-level often require near-daily imagery at medium to high spatial resolution. The combination of data from different ongoing satellite missions, Sentinel 2 (ESA) and Landsat 8 (NASA), provides this opportunity. In this study, we evaluated the leaf area index generated from three methods, namely, existing vegetation index (VI) relationships applied to Harmonized Landsat-8 and Sentinel-2 (HLS) surface reflectance produced by NASA, the SNAP biophysical model, and the THEIA L2A surface reflectance products from Sentinel-2. The intercomparison was conducted over the agricultural scheme in Bekaa (Lebanon) using a large set of in-field LAIs and other biophysical measurements collected in a wide variety of canopy structures during the 2018 and 2019 growing seasons. The major studied crops include herbs (e.g., cannabis: Cannabis sativa, mint: Mentha, and others), potato (Solanum tuberosum), and vegetables (e.g., bean: Phaseolus vulgaris, cabbage: Brassica oleracea, carrot: Daucus carota subsp. sativus, and others). Additionally, crop-specific height and above-ground biomass relationships with LAIs were investigated. Results show that of the empirical VI relationships tested, the EVI2-based HLS models statistically performed the best, specifically, the LAI models originally developed for wheat (RMSE:1.27), maize (RMSE:1.34), and row crops (RMSE:1.38). LAI derived through European Space Agency’s (ESA) Sentinel Application Platform (SNAP) biophysical processor underestimated LAI and provided less accurate estimates (RMSE of 1.72). Additionally, the S2 SeLI LAI algorithm (from SNAP biophysical processor) produced an acceptable accuracy level compared to HLS-EVI2 models (RMSE of 1.38) but with significant underestimation at high LAI values. Our findings show that the LAI-VI relationship, in general, is crop-specific with both linear and non-linear regression forms. Among the examined indices, EVI2 outperformed other vegetation indices when all crops were combined, and therefore it can be identified as an index that is best suited for a unified algorithm for crops in semi-arid irrigated regions with heterogeneous landscapes. Furthermore, our analysis shows that the observed height-LAI relationship is crop-specific and essentially linear with an R² value of 0.82 for potato, 0.79 for wheat, and 0.50 for both cannabis and tobacco. The ability of the linear regression to estimate the fresh and dry above-ground biomass of potato from both observed height and LAI was reasonable, yielding R²: ~0.60. Full article

This work presents a spatiotemporal analysis of the phenology and disturbance response in the Sundarban mangrove forest on the Ganges-Brahmaputra Delta in Bangladesh. The methodological approach is based on an Empirical Orthogonal Function (EOF) analysis of the new Harmonized Landsat Sentinel-2 (HLS) BRDF and atmospherically corrected reflectance time series, preceded by a Robust Principal Component Analysis (RPCA) separation of Low Rank and Sparse components of the image time series. Low Rank components are spatially and temporally pervasive while Sparse components are transient and localized. The RPCA clearly separates subtle spatial variations in the annual cycle of monsoon-modulated greening and senescence of the mangrove forest from the spatiotemporally complex agricultural phenology surrounding the Sundarban. A 3 endmember temporal mixture model maps spatially coherent differences in the 2018 greening-senescence cycle of the mangrove which are both concordant and discordant with existing species composition maps. The discordant patterns suggest a phenological response to environmental factors like surface hydrology. On decadal time scales, a standard EOF analysis of vegetation fraction maps from annual post-monsoon Landsat imagery is sufficient to isolate locations of shoreline advance and retreat related to changes in sedimentation and erosion, as well as cyclone-induced defoliation and recovery. Full article