Search Results (6)

As global demand for renewable energy and electric vehicles increases, the need for lithium has surged significantly. Extracting lithium from salt lake brine has become a cutting-edge technology in lithium resource production. In this study, two-dimensional (2D) GO/MXene composite membranes were fabricated using pressure-assisted filtration with a polyethyleneimine (PEI) coating, resulting in positively charged PEI-GO/MXene membranes. These innovative membranes, taking advantage of the synergistic effects of interlayer channel sieving and the Donnan effect, demonstrated excellent performance in Mg²⁺/Li⁺ separation with a mass ratio of 20 (Mg²⁺ rejection = 85.3%, Li⁺ rejection = 16.7%, S_Li,Mg = 5.7) in simulated saline lake brine. Testing on actual salt lake brine in Tibet, China, confirmed the composite membrane’s potential for effective Mg²⁺/Li⁺ separation. In the actual brine test with high concentration, Mg²⁺/Li⁺ after membrane separation is 2.2, which indicates that the membrane can significantly reduce the concentration of Mg²⁺ in the brine. Additionally, the PEI-GO/MXene composite membrane demonstrated strong anti-swelling properties and effective divalent ion rejection. This research presents an innovative approach to advance the development of 2D membranes for the selective removal of Mg²⁺ and Li⁺ from salt lake brine. Full article

A smart sensing platform based on a triboelectric nanogenerator (TENG) possesses various advantages such as self-powering, convenience, real-time and biocompatibility. However, the detection limit of the TENG-based sensor is required to be improved. In this study, a high performance TENG-based glucose sensor was proposed by using the Ti₃C₂T_x (MXene)/graphene oxide (GO) composite electrode. The MXene and GO nanosheets are popular 2D materials which possessed high conductivity and a rich surface functional group. The MXene/GO thin films were prepared through electrostatic self-assembly technology, which can effectively impede the agglomeration of two nanoflakes. The as-prepared MXene/GO film presented outstanding mechanical property. To figure out the relationship between the nanostructure of MXene/GO film and the TENG, a series of MXene/GO-based TENG with different GO sizes was characterized. As a result, the TENG with 400 nm GO demonstrated the highest output performance. Subsequently, the optimized TENG was used in glucose detection application without the assistance of a glucose enzyme. This simple and flexible TENG shows promising potential in biosensors and non-invasive health monitoring. Full article

MXene materials have the metallic conductivity of transition metal carbides. Among them, Ti₃C₂T_X with an accordion structure has great application prospects in the field of wearable devices. However, flexible wearable electronic devices face the problem of single function in practical application. Therefore, it is particularly important to study a flexible sensor with multiple functions for electronic skin. In this work, the near-field electrohydrodynamic printing (NFEP) method was proposed to prepare the composite thin film with a micro/nanofiber structure on the flexible substrate using a solution of poly(vinylidene fluoride)/MXene nanosheet/reduced graphene oxide (PMR) nanocomposites as the printing solution. A dual-mode flexible sensor for electronic skin based on the PMR nanocomposite thin film was fabricated. The flexible sensor had the detection capability of the piezoresistive mode and the piezoelectric mode. In the piezoresistive mode, the sensitivity was 29.27 kPa⁻¹ and the response/recovery time was 36/55 ms. In the piezoelectric mode, the sensitivity was 8.84 kPa⁻¹ and the response time was 18.2 ms. Under the synergy of the dual modes, functions that cannot be achieved by a single mode sensor can be accomplished. In the process of detecting the pressure or deformation of the object, more information is obtained, which broadens the application range of the flexible sensor. The experimental results show that the dual-mode flexible sensor has great potential in human motion monitoring and wearable electronic device applications. Full article

The limitations of hydrophilicity, strength, antibacterial activity adsorption performance of the biobased and biocompatible polymer materials, such as polyhydroxyalkanoates (PHAs), significantly restrict their wider applications especially in medical areas. In this paper, a novel composite membrane with high antibacterial activity and platelet adsorption performance was prepared based on graphene oxide (GO), MXene and 3-hydroxybutyrate-co-hydroxyvalerate (PHBV), which are medium-chain-length-copolymers of PHA. The GO/MXene nanosheets can uniformly inset on the surface of PHBV fibre and give the PHBV—GO/MXene composite membranes superior hydrophilicity due to the presence of hydroxyl groups and terminal oxygen on the surface of nanosheets, which further provides the functional site for the free radical polymerization of ester bonds between GO/MXene and PHBV. As a result, the tensile strength, platelet adsorption, and blood coagulation time of the PHBV—GO/MXene composite membranes were remarkably increased compared with those of the pure PHBV membranes. The antibacterial rate of the PHBV—GO/MXene composite membranes against gram-positive and gram-negative bacteria can reach 97% due to the antibacterial nature of MXene. The improved strength, hydrophilicity, antibacterial activity and platelet adsorption performance suggest that PHBV—GO/MXene composite membranes might be ideal candidates for multifunctional materials for haemostatic applications. Full article

Novel two-dimensional (2D) membranes have been utilized in water purification or seawater desalination due to their highly designable structure. However, they usually suffer from swelling problems when immersed in solution, which limits their further applications. In this study, 2D cross-linked MXene/GO composite membranes supported on porous polyamide substrates are proposed to improve the antiswelling property and enhance the ion-sieving performance. Transition-metal carbide (MXene) nanosheets were intercalated into GO nanosheets, where the carboxyl groups of GO combined the neighboring hydroxyl terminal groups of MXene with the formation of -COO- bonds between GO and MXene nanosheets via the cross-linking reaction (−OH + −COOH = −COO− + H₂O) after heat treatment. The permeation rates of the metal ions (Li⁺, Na⁺, K⁺, Al³⁺) through the cross-linked MXene/GO composite membrane were 7–40 times lower than those through the pristine MXene/GO membrane. In addition, the cross-linked MXene/GO composite membrane showed excellent Na⁺ rejection performance (99.3%), which was significantly higher than that through pristine MXene/GO composite membranes (80.8%), showing improved ion exclusion performance. Such a strategy represents a new avenue to develop 2D material-derived high-performance membranes for water purification. Full article

Sub-nanochannels constructed by stacking two-dimensional (2D) nanosheets in parallel provide a unique molecular separation pathway with excellent size-sieving ability for membrane gas separation. Herein we review the progress in engineering these 2D channels for efficient gas separation including graphene, graphene oxide (GO), molybdenum disulfide (MoS₂), and MXene. Mixed matrix materials containing these 2D materials in polymers are also reviewed and compared with conventional polymers for gas separation. Full article