Search Results (55)

Enhanced demand for the development of sustainable materials has generated significant research interest in products containing biomass-derived fibers, such as the fibers extracted from the energy crop Sida hermaphrodita (SH). Green chemicals and green methods, such as microwave treatment, have been used for the isolation of fibers from biomass waste. In this study, long extracted fibers were used as a reinforcement of the PLA matrix to give them high strength, which is required for high-performance biocomposites. To enable composite usage in automotive industry, several additives were applied to enhance their mechanical, thermal, and antimicrobial properties. Therefore, vegetable drying oil, montmorillonite nanoclay (MMT), and milled cork were used to improve their mechanical and thermal properties. Zinc oxide (ZnO) was applied to enhance the biocomposite’s antimicrobial properties, which were confirmed through significant bacterial reduction across all tested biocomposite variants, particularly in samples functionalized with ZnO, cork, and montmorillonite. Additionally, X-ray microtomography provided detailed insight into fiber dispersion and internal structural heterogeneity, which is crucial for evaluating mechanical performance and flame-retardant behavior. All characterization methods, including mechanical ones, lead to the conclusion that green and sustainable biocomposites based on PLA and Sida hermaphrodita fibers treated with antimicrobial (AM) and flame-retardant (FR) agents can be successfully applied for a wide variety of antimicrobial and flame-retardant products. Full article

NbAs is a Weyl semimetal and belongs to the group of topological phases that exhibit distinct quantum and topological attributes. Topological phases have a fundamentally different response to external perturbations, such as magnetic fields. To obtain insights into the response of such phases to pressure, we conducted a comprehensive study on the pressure-induced electronic and structural transitions in NbAs. We used micro-X-ray diffraction (XRD) and micro-X-ray spectroscopy (XAS) techniques to elucidate the changes at different atomic and electronic length scales (local, medium, and bulk) as combined with theoretical calculations. High-pressure XRD measurements revealed a rather common compression behavior up to ~12 GPa that could be fitted to an equation of state formalism with a bulk modulus of $⟨K_0⟩=$ 179.6 GPa. Complementary Nb K-edge XAS data unveiled anomalies at pressure intervals of ~12–15 and ~25–26 GPa in agreement with previous literature data from XRD studies. We attribute these anomalies to a previously reported topological Lifshitz transition and the tetragonal-to-hexagonal phase transition, respectively. Analysis of EXAFS results revealed slight changes in the mean next-nearest neighbor distance Nb–As₍₁₎ (~2.6 Å) at ~15 GPa, while the second nearest neighboring bond Nb–Nb₍₁₎ (~3.4 Å) shows a pronounced anomaly. This indicates that the electronic changes across the Lifshitz transition are accommodated first in the medium-range atomic structure and then at the local range and bulk. The variances of these bonds show anomalous but progressive evolutions close to the tetragonal-to-hexagonal transition at ~25 GPa, which allowed us to derive the evolution of vibration properties in this material. We suggest a prominent displacive character of the $I{4}_{1}md\to P\overline{6}m2$ transition facilitated by phonon modes. Full article

We investigated the effect of nanoscale curvature on the structure of thermally equilibrated poly-3-hexylthiophene (P3HT) ultrathin films. The curvature-induced effects were investigated with synchrotron grazing incidence X-ray diffraction (GIXRD) and atomic force microscopy (AFM). Our results demonstrate that nanoscale curvature reduces the polymer crystalline fraction and the crystal length. The first effect is strongest for the lowest curvature and results in a decrease in the out-of-plane thickness of the polymer crystals. On the other hand, the crystal in-plane length decreases with the increase in substrate curvature. Finally, the semi-quantitative analysis of crystal anisotropy shows a marked dependence on the substrate curvature characterized by a minimum at curvatures between 0.00851 nm⁻¹ and 0.0140 nm⁻¹. The results are discussed in terms of a curvature-dependent polymer fraction, which fills the interstices between neighboring particles and cannot crystallize due to extreme space confinement. This fraction, whose thickness is highest at the lowest curvatures, inhibits the crystal nucleation and the out-of-plane crystal growth. Moreover, because of the adhesion to the curved portion of the substrates, crystals adopt a random orientation. By increasing the substrate curvature, the amorphous fraction is reduced, leading to polymer films with higher crystallinity. Finally, when the thickness of the film exceeds the particle diameter, the curvature no longer affects the crystal orientation, which, similarly to the flat case, is predominantly edge on. Full article

In this study, X-ray laminography is used to monitor the evolution of a model 3D packed bed porous medium on a chip (micromodels) undergoing reactive flows. The obtained 3D images are used to compute the fluid flow patterns and develop insights into dissolution mechanisms. This study is a first proof of concept study, with controlled micromodels, and could later be extended towards deeper understanding of the dissolution and precipitation processes occurring in porous media at the microscale, mechanisms which are relevant to many industrial areas including catalysis, geochemistry, energy, and waste storage in deep geological formations, etc. Full article

Pixelated LGADs have been established as the baseline technology for timing detectors for the High Granularity Timing Detector (HGTD) and the Endcap Timing Layer (ETL) of the ATLAS and CMS experiments, respectively. The drawback of segmenting an LGAD is the non-gain area present between pixels and the consequent reduction in the fill factor. To overcome this issue, the inverse LGAD (iLGAD) technology has been proposed by IMB-CNM to enhance the fill factor and provide excellent tracking capabilities. In this work, we explore the use of iLGAD sensors for surface damage irradiation by developing a new generation of iLGADs, the periphery of which is optimized to improve the performance of irradiated sensors. The fabricated iLGAD sensors exhibit good electrical performances before and after X-ray irradiation. Full article

Polymorphous WO₃ micro- and nanostructures have been synthesized by the controlled Joule heating of tungsten wires under ambient conditions in a few seconds. The growth on the wire surface is assisted by the electromigration process and it is further enhanced by the application of an external electric field through a pair of biased parallel copper plates. In this case, a high amount of WO₃ material is also deposited on the copper electrodes, consisting of a few cm${}^2$ area. The temperature measurements of the W wire agrees with the values calculated by a finite element model, which has allowed us to establish the threshold density current to trigger the WO₃ growth. The structural characterization of the produced microstructures accounts for the $\gamma$-WO₃ (monoclinic I), which is the common stable phase at room temperature, along with low temperature phases, known as $\delta$-WO₃ (triclinic) on structures formed on the wire surface and $ϵ$-WO₃ (monoclinic II) on material deposited on external electrodes. These phases allow for a high oxygen vacancies concentration, which is interesting in photocatalysis and sensing applications. The results could help to design experiments to produce oxide nanomaterials from other metal wires by this resistive heating method with scaling-up potential. Full article

Conglomerate formation, where enantiomers within a racemic mixture self-segregate upon crystallization, is an advantageous property for obtaining chirally pure crystals and allows large-scale chiral resolution. However, the prevalence of conglomerates is low and difficult to predict. In this report, we describe our attempts to engineer conglomerates from racemate-forming compounds by integrating them into a conglomerate-forming matrix. In this regard, we found that Ni(II) and Fe(II) form molecular alloys with Zn(II) in [M_xZn_(1−x)(bpy)₃](PF₆)₂ (where bpy = 2,2′-bipyridyl). Powder X-ray Diffraction (PXRD) and Energy-Dispersive X-ray spectroscopy (EDX) evidenced conglomerate crystallization with Ni(II) concentrations up to about 25%, while it was observed only for much lower concentrations of Fe(II). This can be attributed to the ability of [Ni(bpy)₃](PF₆)₂ to access a metastable conglomerate phase, while no such phase has been detected in [Fe(bpy)₃](PF₆)₂. Furthermore, the chiral phase appears to be favored in fast-growing precipitates, while the racemic phase is favored in slow re-crystallizations for both Ni(II) and Fe(II) molecular alloys. X-ray natural circular dichroism (XNCD) measurements on [Ni_0.13Zn_0.87(bpy)₃](PF₆)₂ demonstrate the chirality of the nickel molecules within the zinc molecular matrix. Full article

In this work, Gd-filled skutterudite Gd_xCo₄Sb₁₂ was prepared using one step method under high pressure in a piston-cylinder-based press at 3.5 GPa and moderate temperature of 800 °C. A detailed structural characterization was performed using synchrotron X-ray diffraction (SXRD), revealing a filling fraction of x = 0.033(2) and an average <Gd–Sb> bond length of 3.3499(3) Å. The lattice thermal expansion accessed via temperature-dependent SXRD led to a precise determination of a Debye temperature of 322(3) K, from the fitting of the unit-cell volume expansion using the second order Grüneisen approximation. This parameter, when evaluated through the mean square displacements of Co and Sb, displayed a value of 265(2) K, meaning that the application of the harmonic Debye theory underestimates the Debye temperature in skutterudites. Regarding the Gd atom, its intrinsic disorder value was ~5× and ~25× higher than those of the Co and Sb, respectively, denoting that Gd has a strong rattling behavior with an Einstein temperature of ${\theta }_E$ = 67(2) K. As a result, an ultra-low thermal conductivity of 0.89 W/m·K at 773 K was obtained, leading to a thermoelectric efficiency zT of 0.5 at 673 K. Full article

Among chalcogenide thermoelectric materials, SnTe is an excellent candidate for intermediate temperature applications, in replacement of toxic PbTe. We have prepared pure polycrystalline SnTe by arc melting, and investigated the structural evolution by temperature-dependent neutron powder diffraction (NPD) from room temperature up to 973 K. In this temperature range, the sample is cubic (space group Fm-3m) and shows considerably larger displacement parameters for Te than for Sn. The structural analysis allowed the determination of the Debye model parameters and provided information on the Sn–Te chemical bonds. SEM images show a conspicuous nanostructuration in layers below 30 nm thick, which contributes to the reduction of the thermal conductivity down to 2.5 W/m·K at 800 K. The SPS treatment seems to reduce the number of Sn vacancies, thus diminishing the carrier density and increasing the Seebeck coefficient, which reaches 60 μV K⁻¹ at 700 K, as well as the weighted mobility, almost doubled compared with that of the as-grown sample. Full article

Monoplanar microbeam irradiation (MBI) and pencilbeam irradiation (PBI) are two new concepts of high dose rate radiotherapy, combined with spatial dose fractionation at the micrometre range. In a small animal model, we have explored the concept of integrating MBI or PBI as a simultaneously integrated boost (SIB), either at the beginning or at the end of a conventional, low-dose rate schedule of 5x4 Gy broad beam (BB) whole brain radiotherapy (WBRT). MBI was administered as array of 50 µm wide, quasi-parallel microbeams. For PBI, the target was covered with an array of 50 µm × 50 µm pencilbeams. In both techniques, the centre-to-centre distance was 400 µm. To assure that the entire brain received a dose of at least 4 Gy in all irradiated animals, the peak doses were calculated based on the daily BB fraction to approximate the valley dose. The results of our study have shown that the sequence of the BB irradiation fractions and the microbeam SIB is important to limit the risk of acute adverse effects, including epileptic seizures and death. The microbeam SIB should be integrated early rather than late in the irradiation schedule. Full article

A technique to transform the waveform of a 14.4 keV photon (time dependence of the photon detection probability or, equivalently, the intensity of the single-photon wave packet) into a regular sequence of short, nearly bandwidth-limited pulses with a controlled number of pulses is proposed. It is based on coherent forward scattering of single X-ray photons from a synchrotron Mössbauer source (SMS) in an optically thick, vibrating, recoilless ⁵⁷Fe resonant absorber. The possibility of compressing the waveform of an SMS photon into a single short bell-shaped pulse is predicted. The experiment is proposed for compressing a 100 ns duration 14.4 keV single-photon wave packet produced by SMS at the European Synchrotron Radiation Facility (ESRF) into a single bell-shaped pulse of less than 20 ns duration and more than twice the peak intensity. Such single-photon coherent pulses are promising for applications in the fast-developing field of X-ray quantum optics, including possible implementation of quantum memory. Full article

Radiotherapy is an important component in the treatment of lung cancer, one of the most common cancers worldwide, frequently resulting in death within only a few years of diagnosis. In order to evaluate new therapeutic approaches and compare their efficiency with regard to tumour control at a pre-clinical stage, it is important to develop standardized samples which can serve as inter-institutional outcome controls, independent of differences in local technical parameters or specific techniques. Recent developments in 3D bioprinting techniques could provide a sophisticated solution to this challenge. We have conducted a pilot project to evaluate the suitability of standardized samples generated from 3D printed human lung cancer cells in radiotherapy studies. The samples were irradiated at high dose rates using both broad beam and microbeam techniques. We found the 3D printed constructs to be sufficiently mechanically stable for use in microbeam studies with peak doses up to 400 Gy to test for cytotoxicity, DNA damage, and cancer cell death in vitro. The results of this study show how 3D structures generated from human lung cancer cells in an additive printing process can be used to study the effects of radiotherapy in a standardized manner. Full article

Microbeam radiotherapy (MRT), an experimental high-dose rate concept with spatial fractionation at the micrometre range, has shown a high therapeutic potential as well as good preservation of normal tissue function in pre-clinical studies. We investigated the suitability of MRT as a simultaneously integrated boost (SIB) in conventional whole-brain irradiation (WBRT). A 174 Gy MRT SIB was administered with an array of quasi-parallel, 50 µm wide microbeams spaced at a centre-to-centre distance of 400 µm either on the first or last day of a 5 × 4 Gy radiotherapy schedule in healthy adult C57 BL/6J mice and in F98 glioma cell cultures. The animals were observed for signs of intracranial pressure and focal neurologic signs. Colony counts were conducted in F98 glioma cell cultures. No signs of acute adverse effects were observed in any of the irradiated animals within 3 days after the last irradiation fraction. The tumoricidal effect on F98 cell in vitro was higher when the MRT boost was delivered on the first day of the irradiation course, as opposed to the last day. Therefore, the MRT SIB should be integrated into a clinical radiotherapy schedule as early as possible. Full article

Diffraction enhanced imaging (DEI) is an advanced digital radiographic imaging technique employing the refraction of X-rays to contrast internal interfaces. This study aims to qualitatively and quantitatively evaluate images acquired using this technique and to assess how different fitting functions to the typical rocking curves (RCs) influence the quality of the images. RCs are obtained for every image pixel. This allows the separate determination of the absorption and the refraction properties of the material in a position-sensitive manner. Comparison of various types of fitting functions reveals that the Pseudo-Voigt (PsdV) function is best suited to fit typical RCs. A robust algorithm was developed in the Python programming language, which reliably extracts the physically meaningful information from each pixel of the image. We demonstrate the potential of the algorithm with two specimens: a silicone gel specimen that has well-defined interfaces, and an additively manufactured polycarbonate specimen. Full article

Bone metastases are frequent complications of breast cancer, facilitating the development of anarchic vascularization and induce bone destruction. Therefore, anti-angiogenic drugs (AAD) have been tested as a therapeutic strategy for the treatment of breast cancer bone metastasis. However, the kinetics of skeletal vascularization in response to tumor invasion under AAD is still partially understood. Therefore, the aim of this study was to explore the effect of AAD on experimental bone metastasis by analyzing the three-dimensional (3D) bone vasculature during metastatic formation and progression. Seventy-three eight-week-old female mice were treated with AAD (bevacizumab, vatalanib, or a combination of both drugs) or the vehicle (placebo) one day after injection with breast cancer cells. Mice were sacrificed eight or 22 days after tumor cell inoculation (time points T1 and T2, respectively). Synchrotron radiation microcomputed tomography (SR-μCT) was used to image bone and blood vessels with a contrast agent. Hence, 3D-bone and vascular networks were simultaneously visualized and quantitatively analyzed. At T1, the trabecular bone volume fraction was significantly increased (p < 0.05) in the combined AAD-treatment group, compared to the placebo- and single AAD-treatment groups. At T2, only the bone vasculature was reduced in the combined AAD-treatment group (p < 0.05), as judged by measurement of the blood vessel thickness. Our data suggest that, at the early stage, combined AAD treatment dampens tumor-induced bone resorption with no detectable effects on bone vessel organization while, at a later stage, it affects the structure of bone microvascularization. Full article