Search Results (10)

The apicomplexan parasite Toxoplasma gondii can potentially infect all warm-blooded animals, including birds, which, due to their high dispersal capabilities, are considered a significant candidate group of sentinel animals that reveal environmental contamination with this protozoan. In the present study, the serologic and molecular prevalences of T. gondii infection were determined in 333 corvids from Romania. Paired meat juice (n = 333) and heart samples (n = 244) were collected and analyzed using the modified agglutination test for antibodies, polymerase chain reaction (PCR) for DNA, and SAG2 molecular marker sequencing for genotyping. The overall T. gondii antibodies prevalence was 19.5%, with 48.1% infected jackdaws, 72.8% rooks, 89.7% hooded crows, 77.5% magpies, and 42.9% jays. Of 244 heart samples analyzed with PCR amplification, only 3 (1.2%) resulted positive and were shown to belong to genotype III through the sequencing of the SAG2 amplicon. This is the first extensive study on T. gondii in crows from Romania. Full article

Background and Objective: The use of computed tomography (CT)-based navigation systems has been shown to improve surgical accuracy in total hip arthroplasty. However, there is limited literature available about the application of CT-based navigation systems in severe hip dysplasia. This study aimed to evaluate the accuracy of a CT-based navigation system in patients with severe hip dysplasia using three-dimensional (3D)-printed bone models. Methods: 3D-printed bone models were generated from CT data of patients with severe hip dysplasia (Crowe type II, 10 hips; type III, 10 hips; and type IV, 10 hips). The accuracy of automatic segmentation, success rate, point-matching accuracy across different registration methods, and deviation values at reference points after registration were assessed. Results: For the combined cohort of Crowe II, III, and IV cases (n = 30), the Dice Similarity Coefficient and Jaccard Index were 0.99 ± 0.01 and 0.98 ± 0.02, respectively. These values indicate a high level of segmentation accuracy. The “Matching with true and false acetabulum + iliac crest” method achieved a 100% success rate across all groups, with mean deviations of 0.08 ± 0.28 mm in the Crowe II group, 0.12 ± 0.33 mm in the Crowe III group, and 0.14 ± 0.50 mm in the Crowe IV group (p = 0.572). In the Crowe IV group, the anterior superior iliac spine deviation was significantly lower using the “Matching with true and false acetabulum + iliac crest” method compared to the “Matching with true and false acetabulum” method (0.28 ± 0.49 mm vs. 3.29 ± 2.56 mm, p < 0.05). Conclusions: This study demonstrated the high accuracy of automatic AI-based segmentation, with a Dice Similarity Coefficient of 0.99 ± 0.01 and a Jaccard Index of 0.98 ± 0.02 in the combined cohort of Crowe type II, III, and IV cases (n = 30). The matching success rate was 100%, with additional points on the iliac crest, which improved matching accuracy and reduced deviations, depending on the case. Full article

Background/Objectives: Developmental dysplasia of the hip (DDH), defined by the malalignment of the femoral head and acetabulum, is a major precursor to coxarthrosis, posing substantial challenges during total hip arthroplasty (THA). Patients with coxarthrosis secondary to DDH often exhibit acetabular bone insufficiency, which makes challenging surgical reconstruction difficult. This study aimed to compare the radiologic and functional outcomes of robotically assisted and conventional manual THA techniques in patients with coxarthrosis secondary to Crowe type III–IV DDH. Methods: This prospective study included 40 patients divided into robotically assisted (n = 20) and conventional manual (n = 20) THA groups. Evaluations encompassed hip pain (Visual Analogue Scale, VAS), function (Harris hip score and University of California, Los Angeles, activity scale), quality of life (Short Form-12), and prosthesis sensation (Forgotten Joint Score-12). Radiologic outcomes included acetabular inclination and anteversion angles. Femoral shortening, operative duration, and follow-up times were also analyzed. Results: Demographic characteristics did not differ between groups (p > 0.05). Robotically assisted THA exhibited a significantly longer operative time (171.40 ± 11.96 vs. 150.30 ± 14.67 min; p = 0.001) but a shorter follow-up (29.3 ± 8.51 vs. 52.95 ± 18.96 months; p = 0.001), without a difference in the amount of femoral shortening (p = 0.947). Despite the extended surgical duration, the two techniques achieved comparable radiologic outcomes, with no significant differences in acetabular inclination or anteversion angles (p > 0.05). Functional assessments, including Harris hip scores (73.85 vs. 73.95; p = 0.978), UCLA activity scores, and VAS, indicated similar efficacy between groups. SF-12 physical and mental quality of life and Forgotten Joint Score-12 prosthesis sensation did not differ between groups (p > 0.05). Conclusions: This study concludes that robotically assisted and conventional manual THA present similar radiologic and functional outcomes in patients with coxarthrosis secondary to Crowe type III–IV DDH, as displayed by comparable acetabular anteversion and inclination alignment, femoral shortening, hip function, pain, quality of life, and prosthesis sensation scores. While robotically assisted THA requires a longer operative time, its precision in implant placement may hold potential advantages for long-term outcomes, demanding further investigation in extended follow-up studies. Full article

Developmental dysplasia of the hip (DDH) presents varying degrees of femoral head dislocation, with severe cases leading to the formation of a new articular surface on the external side of the iliac bone—the neoacetabulum. Despite conventional understanding suggesting otherwise, a tissue resembling hyaline cartilage is found in the neoacetabulum and acetabulum of Crowe III and IV patients, indicating a potential for hyaline cartilage development without mechanical pressure. To test this theory, acetabular and femoral head cartilage obtained from patients with DDH was stained with hematoxylin–eosin and toluidine blue. The immunohistochemical analysis for collagen types II and VI and aggrecan was performed, as well as delayed gadolinium-enhanced MRI of cartilage (dGEMRIC) analysis on a 7.0 T micro-MRI machine. The results obtained from DDH patients were compared to those of the control groups. Hyaline cartilage was found in the neoacetabulum and the acetabulum of patients with DDH. The nature of the tissue was confirmed with both the histological and the MRI analyses. The results of this study proved the presence of hyaline cartilage in patients with DDH at anatomical regions genetically predisposed to be bone tissue and at regions that are not subjected to mechanical stress. This is the first time that the neoacetabular cartilage of patients with advanced stages of DDH has been characterized in detail. Full article

Background: There is a paucity of data regarding the post-operative influence of total hip arthroplasty (THA) on the axial and coronal alignments of the ipsilateral knee. A CT study was designed to assess the post-THA changes in axial and coronal knee alignments in low-grade dysplastic hips. Methods: Forty Crowe I–II dysplastic hips in 37 patients were assessed: a pre-operative CT scan from the fourth lumbar vertebra to the tibial plateaus was compared to a similar post-operative CT scan performed after a minimum of 2 years after THA. Results: THA implantation caused significant post-operative changes in terms of the rotation height (2 mm lowering; p = 0.003); center of rotation medialization (10 mm medialization; p < 0.001); femoral offset (11 mm increase; p < 0.001); femoral antetorsion (22° internal rotation; p < 0.001), and hip internal rotation (9° internal rotation; p < 0.001). The femoral axis angle deviated in the valgus (5.5° ± 1.1°, p < 0.001) and the mechanical lateral distal femoral angle deviated in the varus (86° ± 2.7°, p = 0.001). The pelvic–tibial alignment changed from 88.2° ± 11.7° to 96° ± 9.3° (p < 0.001). Patellar alignment was not influenced. Conclusions: In conclusion, THA imposes significant changes in low-grade dysplastic hips: all the modifications tend to neutralize the coronal alignment and, mostly, the rotational alignment, without substantial and durable variations of the patellofemoral joint. Large clinical trials should confirm whether radiological changes impact anterior knee pain and patellar stability. Full article

Introduction: The pathologic anatomy of Crowe III is characterized by the erosion of the superior rim of acetabulum, with a typical bone defect in its supero–lateral portion. The performance of a total hip arthroplasty requires the management of the acetabular bone defect, and femoral head autograft can be a valid option to optimize implant coverage. Material and Methods: In all, eight Crowe III patients (nine hips), seven of which having unilateral hip affected, and one with bilateral involvement by secondary osteoarthritis in DDH; maximum limb length discrepancy (LLD) of 3.5 cm in unilateral patients. All were operated on by direct anterior approach. Patients were evaluated in terms of clinical, surgical, and radiological (center-edge, horizontal coverage, cup inclination) parameters. Results: Cup placement was implanted with a mean of 39.5 ± 7.5°. Stem alignment showed average 1.5 ± 2.3° in valgus. LLD showed an overall average preoperative of −29.5 ± 10.5 mm at the affected side, with a significant improvement to −2.5 ± 6.4 mm (p = 0.023). The mean initial coverage evaluated like a percentage of the horizontal bone host was 52.1 ± 7.1%, while the mean final coverage at the last post-operative X-ray from femoral autograft bone was 97.0 ± 4.5% with an average improvement of 44.5%. Average CE improved from −9.5 ± 5.2° (CE I) to the immediate post-operative (CE II) of 40.6 ± 8.2°. At the final follow up, CE III showed a mean of 38.6 ± 6.2°, with an average decrease of 2.0°. Discussion: Acetabular bone defect in Crowe III DDH patients undergoing THA by DAA, can be efficiently managed by massive autograft femoral head, which allowed an adequate and long-lasting coverage of the implant, with cup positioning at the native acetabulum. Full article

Cup overhanging in total hip arthroplasty is a predisposing factor to iliopsoas impingement. In dysplastic hips, cup implantation was simulated in an anatomic hip center of rotation (AHCR) and in high hip center (HHCR). We sought to assess: (1) the percentage of prominent cups; (2) quantify the cup protrusion at different sites on frontal, axial and sagittal views. In 40 Crowe III-IV hips, using a 3D CT-based planning software, cup planning in AHCR and HHCR (CR height ≥ 20 mm) was performed for every hip. Cup prominence was assessed on every plane. HHCR cups were less anteverted (p < 0.01), less medialized (p < 0.001) and less caudal (p = 0.01) than AHCR sockets. AHCR cups were more frequently prominent on at least one plane (92.5% vs. 77.5%), with minimal agreement between the two configurations (k = 0.31, p = 0.07). AHCR cups protruded more than HHCR sockets in the sagittal (p = 0.02) and axial planes (p < 0.001). Axially, at the center of the cup, prominence 6–11 mm occurred in nine (22.5%) AHCR and one (2.5%) HHCR socket. In conclusion, while a routine high hip center should not be recommended, cup placement at a center of rotation height < 20 mm is associated with higher rates and magnitudes of anterior cup protrusion in severe dysplasia. Full article

This study presents a master–slave methodology to solve the problem of optimally locating and sizing photovoltaic (PV) generation units in electrical networks. This problem is represented by means of a Mixed-Integer Nonlinear Programming (MINLP) model, whose objective function is to reduce the total annual operating costs of a network for a 20-year planning period. Such costs include (i) the costs of purchasing energy at the conventional generators (the main supply node in this particular case), (ii) the investment in the PV generation units, and (iii) their corresponding operation and maintenance costs. In the proposed master–slave method, the master stage uses the Discrete–Continuous version of the Crow Search Algorithm (DCCSA) to define the set of nodes where the PV generation units will be installed (location), as well as their nominal power (sizing), and the slave stage employs the successive approximation power flow technique to find the value of the objective function of each individual provided by the master stage. The numerical results obtained in the 33- and 69-node test systems demonstrated its applicability, efficiency, and robustness when compared to other methods reported in the specialized literature, such as the vortex search algorithm, the generalized normal distribution optimizer, and the particle swarm optimization algorithm. All simulations were performed in MATLAB using our own scripts. Full article

Chlamydiaceae occurrence has been largely evaluated in wildlife, showing that wild birds are efficient reservoirs for avian chlamydiosis. In this study, DNA extracted from cloacal swabs of 108 corvids from Northeast Italy was screened for Chlamydiaceae by 23S real-time (rt)PCR. The positive samples were characterised by specific rtPCRs for Chlamydia psittaci, Chlamydia abortus, Chlamydia gallinacea, Chlamydia avium, Chlamydia pecorum and Chlamydia suis. Cloacal shedding of Chlamydiaceae was detected in 12 out of 108 (11.1%, 5.9%–18.6% 95% CI) corvids sampled. Molecular characterisation at the species level was possible in 8/12 samples, showing C. psittaci positivity in only one sample from a hooded crow and C. abortus positivity in seven samples, two from Eurasian magpies and five from hooded crows. Genotyping of the C. psittaci-positive sample was undertaken via PCR/high-resolution melting, clustering it in group III_pigeon, corresponding to the B genotype based on former ompA analysis. For C. abortus genotyping, multilocus sequence typing was successfully performed on the two samples with high DNA load from Eurasian magpies, highlighting 100% identity with the recently reported Polish avian C. abortus genotype 1V strain 15-58d44. To confirm the intermediate characteristics between C. psittaci and C. abortus, both samples, as well as two samples from hooded crows, showed the chlamydial plasmid inherent in most C. psittaci and avian C. abortus, but not in ruminant C. abortus strains. The plasmid sequences were highly similar (≥99%) to those of the Polish avian C. abortus genotype 1V strain 15-58d44. To our knowledge, this is the first report of avian C. abortus strains in Italy, specifically genotype 1V, confirming that they are actively circulating in corvids in the Italian region tested. Full article

Free-ranging corvids—678 magpies (Pica pica) and 120 hooded crows (Corvus cornix) from nine protected areas of the Pisa province (central Italy)—were examined for Toxoplasma gondii and Trichinella pseudospiralis. The intracardiac blood clots from 651 magpies and 120 hooded crows were serologically examined for T. gondii. The DNA extracted from the hearts of seropositive birds was then used to perform a nested PCR for the amplification of the T. gondii B1 gene and for genotyping for SAG genetic markers. Breast muscle samples from 678 magpies and 91 hooded crows were tested by an artificial digestion method for Trichinella. Data were statistically analyzed. Forty-five (5.8%—41 magpies and four hooded crows) out of the 771 examined animals scored seropositive for T. gondii, with titers ranging from 1:25 to 1:100. T. gondii DNA was detected in 15 of the 45 positive birds and T. gondii genotypes II and III were identified. No positivity for T. pseudospiralis was found. No significant differences between the two species of corvids and among the different areas of origin were observed for seropositivity to T. gondii. This is the first extensive study on both T. gondii and T. pseudospiralis in magpies and hooded crows, as well as the first detection of T. gondii SAG genotypes in magpies. Full article