Search Results (19)

Light olefins, as important bulk raw materials in the petrochemical industry, play an irreplaceable role in the development of the manufacturing industry and the economy. The epoxides of light olefins are important intermediates for the synthesis of polymers, drugs, and fine chemicals, and their green, efficient, and safe synthesis has attracted much attention. This review focuses on the research progress of light olefin epoxidation and elucidates traditional epoxidation methods, such as the chlorohydrin method. Although these processes have mature processes, they have drawbacks, including equipment corrosion, environmental pollution, poor safety, and high waste emissions. Special emphasis is placed on catalytic epoxidation systems using oxygen or organic peroxides as oxygen sources. For homogeneous catalytic systems, certain metal complexes exhibit high activity and selectivity yet are difficult to separate and recycle. Moreover, heterogeneous catalytic systems have become a research hotspot due to their advantages of easy separation and reusability, with supported metal catalysts being a prime example. Meanwhile, the effects of reaction temperature, pressure, solvent, etc., on epoxidation are explored. The specific reaction mechanisms are also studied and analyzed. Current research challenges, including enhancing catalyst stability and reducing costs, are summarized. In the future, developing highly efficient, green, and economically viable epoxidation technologies for large-scale industrial applications represents an important research direction in this field. Full article

Epoxidation of long-chain α-olefins (LAOs) is a process of paramount importance, particularly in the preparation of epoxides. Traditional epoxidation methods, such as the chlorohydrin method and peracid method, suffer from issues such as poor selectivity, by-product formation, and environmental pollution. Mukaiyama epoxidation, with its mild reaction conditions and exceptional selectivity, has attracted widespread attention and considerable research. Transition metal oxide catalysts show potential in the reaction; however, the catalytic efficiency still require substantial improvement due to dilemma of substance activation. In this study, a synergistic enhancement method was employed, achieved through the creation of oxygen vacancies and the electron-rich nature of Cu. The substitution of Cu with Sn in CuO facilitates the creation of oxygen vacancy (Vo), thereby enhancing absorption and activation of O₂. The conversion for O₂ activation paves the way for the formation of benzoyl peroxy radicals. Moreover, the interaction between Sn and Cu promotes charge transfer from Sn to Cu, resulting in an electron-rich Cu surface that significantly accelerates the dehydrogenation of benzaldehyde. The synergistic enhancement protocol exhibits near-quantitative performance, delivering an oxide yield of 92.9%. This study introduces an innovative dual-promotion catalytic strategy for Mukaiyama epoxidation utilizing readily available O₂, providing profound insights into the optimization design of transition metal oxide catalysts and beyond. Full article

(S)-Atenolol ((S)-2-(4-(2-Hydroxy-3-(isopropylamino)propoxy)phenyl)acetamide) has been synthesized in >99% enantiomeric excess (ee) with the use of Candida antarctica lipase B from Syncozymes (Shanghai, China), in a kinetic resolution of the corresponding racemic chlorohydrin. A catalytic amount of base was used in deprotonation of the phenol building block. The enantiopurity of the chlorohydrin building block remained unchanged upon subsequent amination to yield the final drug. All four steps in the synthesis protocol have been optimized compared to previously reported methods, which makes this new protocol more sustainable and in accordance with green chemistry principles. The overall yield of (S)-atenolol was 9.9%, which will be further optimized. Full article

The occurrence of free fatty acids (FFAs) and the generation of reactive oxygen species (ROS) such as hydroxyl radicals (HO^●) or hypochlorous acid (HOCl) is characteristic of inflammatory diseases, for instance, rheumatoid arthritis. Unsaturated fatty acids react with ROS yielding a variety of important products such as peroxides and chlorohydrins as primary and chain-shortened compounds (e.g., aldehydes and carboxylic acids) as secondary products. These modified fatty acids are either released from phospholipids by phospholipases or oxidatively modified subsequent to their release. There is increasing evidence that oligomeric products are also generated upon these processes. Fatty acid esters of hydroxy fatty acids (FAHFAs) are considered as very important products, but chlorinated compounds may be converted into dimeric and (with smaller yields) oligomeric products, as well. Our review is structured as follows: first, the different types of FFA oligomers known so far and the mechanisms of their putative generation are explained. Industrially relevant products as well as compounds generated from the frying of vegetable oils are also discussed. Second, the different opinions on whether dimeric fatty acids are considered as “friends” or “foes” are discussed. Full article

Dinoflagellates make up the second largest marine group of marine unicellular eukaryotes in the world ocean and comprise both heterotrophic and autotrophic species, encompassing a wide genetic and chemical diversity. They produce a plethora of secondary metabolites that can be toxic to other species and are mainly used against predators and competing species. Dinoflagellates are indeed often responsible for harmful algal bloom, where their toxic secondary metabolites can accumulate along the food chain, leading to significant damages to the ecosystem and human health. Secondary metabolites from dinoflagellates have been widely investigated for potential biomedical applications and have revealed multiple antimicrobial, antifungal, and anticancer properties. Species from the genus Amphidinium seem to be particularly interesting for the production of medically relevant compounds. The present review aims at summarising current knowledge on the diversity and the pharmaceutical properties of secondary metabolites from the genus Amphidinium. Specifically, Amphidinium spp. produce a range of polyketides possessing cytotoxic activities such as amphidinolides, caribenolides, amphidinins, and amphidinols. Potent antimicrobial properties against antibiotic-resistant bacterial strains have been observed for several amphidinins. Amphidinols revealed instead strong activities against infectious fungi such as Candida albicans and Aspergillus fumigatus. Finally, compounds such as amphidinolides, isocaribenolide-I, and chlorohydrin 2 revealed potent cytotoxic activities against different cancer cell lines. Overall, the wide variety of antimicrobial, antifungal, and anticancer properties of secondary metabolites from Amphidinium spp. make this genus a highly suitable candidate for future medical applications, spanning from cancer drugs to antimicrobial products that are alternatives to currently available antibiotic and antimycotic products. Full article

Two approaches to the synthesis of para-menthene epoxide ((1S,5S,6R)-4) are developed. The first approach includes a reaction between chlorohydrin 7 and NaH in THF. The second involves the formation of epoxide in the reaction of corresponding diacetate 6 with sodium tert-butoxide. One possible mechanism of this reaction is proposed to explain unexpected outcomes in the regio- and stereospecificity of epoxide (1S,5S,6R)-4 formation. The epoxide ring in (1S,5S,6R)-4 is then opened by various S- and O-nucleophiles. This series of reactions allows for the stereoselective synthesis of diverse derivatives of the monoterpenoid Prottremine 1, a compound known for its antiparkinsonian activity, including promising antiparkinsonian properties. Full article

The β-blocker (S)-bisoprolol hemifumarate has been synthesised in 96% enantiomeric excess with 19% total yield in a six-step synthesis. A transesterification reaction of the racemic chlorohydrin 1-chloro-3-(4-((2-isopropoxyethoxy)methyl)phenoxy)propan-2-ol catalysed by lipase B from Candida antarctica resulted in the R-chlorohydrin in high enantiomeric purity. Reaction of this building block with isopropylamine in methanol gave (S)-bisoprolol, and further reaction with fumaric acid gave (S)-bisoprolol fumarate in 96% ee. Specific rotation value confirmed the absolute configuration of the enantiopure drug. Full article

The β-blocker (S)-betaxolol has been synthesized in 99% enantiomeric excess (ee) from the commercially available precursor 4-(2-hydroxyethyl)phenol. The racemic chlorohydrin 1-chloro-3-(4-(2-(cyclopropylmethoxy)ethyl)phenoxy)propan-2-ol was esterified with vinyl acetate catalyzed by lipase B from Candida antarctica, which gave the R-chlorhydrin (R)-1-chloro-3-(4-(2-(cyclopropylmethoxy)ethyl)phenoxy)propan-2-ol in 99% ee with 38% yield. The enantiomeric excess of the R-chlorohydrin was retained in an amination reaction with isopropylamine in methanol to yield (S)-betaxolol in 99% ee and with 9% overall yield. We are under way to improve the yield. Full article

The β-blocker (S)-esmolol, has been synthesized in 97% enantiomeric excess and 26% total yield in a four-step synthesis, with a transesterification step of the racemic chlorohydrin methyl 3-(4-(3-chloro-2-hydroxypropoxy)phenyl)propanoate, catalysed by lipase B from Candida antarctica from Syncozymes, Shanghai, China. The β-blocker (S)-penbutolol, has been synthesized in 99% enantiomeric excess and in 22% total yield. The transesterification step of the racemic chlorohydrin 1-chloro-3-(2-cyclopentylphenoxy)propan-2-ol was catalyzed by the same lipase as used for the esmolol building block. We have used different bases for the deprotonation step of the starting phenols, and vinyl butanoate as the acyl donor in the transesterification reactions. The reaction times for the kinetic resolution steps catalysed by the lipase varied from 23 to 48 h, and were run at 30–38 °C. Specific rotation values confirmed the absolute configuration of the enantiopure drugs, however, an earlier report of the specific rotation value of (S)-esmolol is not consistent with our measured specific rotation values, and we here claim that our data are correct. Compared to the previously reported syntheses of these two enantiopure drugs, we have replaced toluene or dichloromethane with acetonitrile, and replaced the flammable acetyl chloride with lithium chloride. We have also reduced the amount of epichlorohydrin and bases, and identified dimeric byproducts in order to obtain higher yields. Full article

Withanolides constitute one of the most interesting classes of natural products due to their diversity of structures and biological activities. Our recent studies on withanolides obtained from plants of Solanaceae including Withania somnifera and a number of Physalis species grown under environmentally controlled aeroponic conditions suggested that this technique is a convenient, reproducible, and superior method for their production and structural diversification. Investigation of aeroponically grown Physalis coztomatl afforded 29 withanolides compared to a total of 13 obtained previously from the wild-crafted plant and included 12 new withanolides, physacoztolides I−M (9–13), 15α-acetoxy-28-hydroxyphysachenolide C (14), 28-oxophysachenolide C (15), and 28-hydroxyphysachenolide C (16), 5α-chloro-6β-hydroxy-5,6-dihydrophysachenolide D (17), 15α-acetoxy-5α-chloro-6β-hydroxy-5,6-dihydrophysachenolide D (18), 28-hydroxy-5α-chloro-6β-hydroxy-5,6-dihydrophysachenolide D (19), physachenolide A-5-methyl ether (20), and 17 known withanolides 3–5, 8, and 21–33. The structures of 9–20 were elucidated by the analysis of their spectroscopic data and the known withanolides 3–5, 8, and 21–33 were identified by comparison of their spectroscopic data with those reported. Evaluation against a panel of prostate cancer (LNCaP, VCaP, DU-145, and PC-3) and renal carcinoma (ACHN) cell lines, and normal human foreskin fibroblast (WI-38) cells revealed that 8, 13, 15, and 17–19 had potent and selective activity for prostate cancer cell lines. Facile conversion of the 5,6-chlorohydrin 17 to its 5,6-epoxide 8 in cell culture medium used for the bioassay suggested that the cytotoxic activities observed for 17–19 may be due to in situ formation of their corresponding 5β,6β-epoxides, 8, 27, and 28. Full article

Sustainable methods for producing enantiopure drugs have been developed. Chlorohydrins as building blocks for several β-blockers have been synthesized in high enantiomeric purity by chemo-enzymatic methods. The yield of the chlorohydrins increased by the use of catalytic amount of base. The reason for this was found to be the reduced formation of the dimeric by-products compared to the use of higher concentration of the base. An overall reduction of reagents and reaction time was also obtained compared to our previously reported data of similar compounds. The enantiomers of the chlorohydrin building blocks were obtained by kinetic resolution of the racemate in transesterification reactions catalyzed by Candida antarctica Lipase B (CALB). Optical rotations confirmed the absolute configuration of the enantiopure drugs. The β-blocker (S)-practolol ((S)-N-(4-(2-hydroxy-3-(isopropylamino)propoxy)phenyl)acetamide) was synthesized with 96% enantiomeric excess (ee) from the chlorohydrin (R)-N-(4-(3-chloro-2 hydroxypropoxy)phenyl)acetamide, which was produced in 97% ee and with 27% yield. Racemic building block 1-((1H-indol-4-yl)oxy)-3-chloropropan-2-ol for the β-blocker pindolol was produced in 53% yield and (R)-1-((1H-indol-4-yl)oxy)-3-chloropropan-2-ol was produced in 92% ee. The chlorohydrin 7-(3-chloro-2-hydroxypropoxy)-3,4-dihydroquinolin-2(1H)-one, a building block for a derivative of carteolol was produced in 77% yield. (R)-7-(3-Chloro-2-hydroxypropoxy)-3,4-dihydroquinolin-2(1H)-one was obtained in 96% ee. The S-enantiomer of this carteolol derivative was produced in 97% ee in 87% yield. Racemic building block 5-(3-chloro-2-hydroxypropoxy)-3,4-dihydroquinolin-2(1H)-one, building block for the drug carteolol, was also produced in 53% yield, with 96% ee of the R-chlorohydrin (R)-5-(3-chloro-2-hydroxypropoxy)-3,4-dihydroquinolin-2(1H)-one. (S)-Carteolol was produced in 96% ee with low yield, which easily can be improved. Full article

Crude glycerol (C₃H₈O₃) is a major by-product of biodiesel production from vegetable oils and animal fats. The increased biodiesel production in the last two decades has forced glycerol production up and prices down. However, crude glycerol from biodiesel production is not of adequate purity for industrial uses, including food, cosmetics and pharmaceuticals. The purification process of crude glycerol to reach the quality standards required by industry is expensive and dificult. Novel uses for crude glycerol can reduce the price of biodiesel and make it an economical alternative to diesel. Moreover, novel uses may improve environmental impact, since crude glycerol disposal is expensive and dificult. Glycerol is a versatile molecule with many potential applications in fermentation processes and synthetic chemistry. It serves as a glucose substitute in microbial growth media and as a precursor in the synthesis of a number of commercial intermediates or fine chemicals. Chlorinated derivatives of glycerol are an important class of such chemicals. The main focus of this review is the conversion of glycerol to chlorinated derivatives, such as epichlorohydrin and chlorohydrins, and their further use in the synthesis of additional downstream products. Downstream products include non-cyclic compounds with allyl, nitrile, azide and other functional groups, as well as oxazolidinones and triazoles, which are cyclic compounds derived from ephichlorohydrin and chlorohydrins. The polymers and ionic liquids, which use glycerol as an initial building block, are highlighted, as well. Full article

This study aimed to integrate and analyze the existing studies and to explore research trends and hotspots related to the effects of xenobiotics on glucose metabolism in male testes. All articles were retrieved from the PubMed database, from an inception date up to 10 June 2017. CiteSpace software (version 5.1.R8 SE) was used for the co-word cluster analysis. A total of 165 eligible publications were included in this study. In 1949–1959, only two articles were published. After 1960, the number of articles increased steadily. These articles were published in 97 journals, in particular, in the Indian Journal of Experimental Biology (11 articles, 6.7%). Most of the authors (87.0%) only published one article. Only a few established research teams, mostly from the USA, worked consistently in this field. The main xenobiotics that had been studied were medicine and common environmental pollutants, e.g., gossypol, cadmium, di-n-butyl phthalate, and alpha-chlorohydrin. The hotspot keywords were Sertoli cell, lactate dehydrogenase, 6-phosphate dehydrogenase, oxidative stress, and glucose metabolism. The focus of research had been changed overtime. This is the first bibliometric study between xenobiotics and glucose metabolism in the male testes. The findings suggest that environmental pollutants have become a huge concern, and related research should be strengthened. Full article

A two-step stereoselective chemoenzymatic synthesis of optically active α-aryl-substituted oxygen heterocycles was developed, exploiting a whole-cell mediated asymmetric reduction of α-, β-, and γ-chloroalkyl arylketones followed by a stereospecific cyclization of the corresponding chlorohydrins into the target heterocycles. Among the various whole cells screened (baker’s yeast, Kluyveromyces marxianus CBS 6556, Saccharomyces cerevisiae CBS 7336, Lactobacillus reuteri DSM 20016), baker’s yeast was the one providing the best yields and the highest enantiomeric ratios (up to 95:5 er) in the bioreduction of the above ketones. The obtained optically active chlorohydrins could be almost quantitatively cyclized in a basic medium into the corresponding α-aryl-substituted cyclic ethers without any erosion of their enantiomeric integrity. In this respect, valuable, chiral non-racemic functionalized oxygen containing heterocycles (e.g., (S)-styrene oxide, (S)-2-phenyloxetane, (S)-2-phenyltetrahydrofuran), amenable to be further elaborated on, can be smoothly and successfully generated from their prochiral precursors. Full article

Pericosine E (6), a metabolite of Periconia byssoides OUPS-N133 was originally isolated from the sea hare Aplysia kurodai, which exists as an enantiomeric mixture in nature. The enantiospecific syntheses of both enantiomers of Periconia byssoides OUPS-N133 has been achieved, along with six stereoisomers, using a common simple synthetic strategy. For these efficient syntheses, highly regio- and steroselective processes for the preparation of bromohydrin and anti-epoxide intermediates were applied. In order to access the unique O-linked carbadisaccharide structure, coupling of chlorohydrin as a donor and anti-epoxide as an acceptor was achieved using catalytic BF₃·Et₂O. Most of the synthesized compounds exhibited selectively significant inhibitory activity against α-glycosidase derived from yeast. The strongest analog showed almost 50 times the activity of the positive control, deoxynojirimycin. Full article