Search Results (7)

Geological heterogeneity impacts groundwater flow patterns, necessitating a detailed hydrogeological framework for conceptualization process of aquifer systems. This research developed a new conceptual model of detailed geologic geometry by integrating 133 well-logs, 366 hydrodynamic data and 118 water samples. As new results, systematic 3D log correlation detected four distinct hydrostratigraphic units in the Southern Nyírség–Hajdúság Groundwater Body (East Hungary). The primary aquifer was identified as an incised valley 10–13 km wide and a NE–SW strike. Logan’s approach estimated the average hydraulic conductivity of the Incised Valley Unit (IVU) at 11 m/d, higher than the other three aquifers (3.2 m/d to 4.6 m/d). The average specific capacity of wells screening the IVU is 315.6 m³/d/m, in contrast with the remaining aquifers ranging from 31.6 m³/d/m to 92 m³/d/m. Pressure–depth profiles, dynamic pressure increment and hydraulic head maps revealed recharge–discharge zones and hydraulic windows between hydrostratigraphic units. The elongated pattern on the hydraulic head map at the depth of the IVU showed the existence of a preferential path along its axis within the mapped borders of the IVU. Hydrochemical analysis revealed Ca-Mg-HCO₃ water type within the primary aquifer and Na-HCO₃ water type in the laterally connected aquifer. The saturation index values indicated a transition from undersaturated to supersaturated state inside the main aquifer for calcite and dolomite minerals. The correlation matrix and PCA results demonstrated that the carbonate weathering process is the main factor controlling the groundwater chemistry. This integrated approach holds significance for future applications of the regional conceptual model in water management planning, sustainable aquifer development and contaminant transport modelling. It provides essential contributions to informed decision-making and the formulation of effective strategies, ensuring the long-term availability and utilization of groundwater resources. Full article

Hydrosystems in the Saskatchewan River Basin of the Canadian Prairies are subject to natural and socioeconomic pressures. Increasingly, these strong pressures are exacerbating problems of water resource accessibility and depletion. Unfortunately, the geometric heterogeneity of the aquifers and the presence of lithologically varied layers complicate groundwater flow studies, hydrodynamic characterization, and aquifer storativity calculations. Moreover, in recent hydrogeological studies, hydraulic conductivity has been the subject of much more research than storativity. It is in this context that the present research was conducted, to establish a 3D hydrostratigraphic model that highlights the geological (lithology, thickness, and depth) and hydrodynamic characteristics of the aquifer formations and proposes a new uncertainty framework for groundwater storage estimation. The general methodology is based on collecting and processing a very fragmentary and diverse multi-source database to develop the conceptual model. Data were harmonized and entered into a common database management system. A large quantity of geological information has been implemented in a 3D hydrostratigraphic model to establish the finest geometry of the SRB aquifers. Then, the different sources of uncertainty were controlled and considered in the modeling process by developing a randomized modeling system based on spatial random bagging simulation (SRBS). The results of the research show the following: Firstly, the distribution of aquifer levels is controlled by tectonic activity and erosion, which further suggests that most buried valleys on the Prairies have filled over time, likely during multiple glaciations in several depositional environments. Secondly, the geostatistical study allowed us to choose optimal interpolation variographic parameters. Finally, the final storativity maps of the different aquifer formations showed a huge potential of groundwater in SRB. The SRBS method allowed us to calculate the optimal storativity values for each mesh and to obtain a final storativity map for each formation. For example, for the Paskapoo Formation, the distribution grid of groundwater storage shows that the east part of the aquifer can store up to 5920 × 10³ m³/voxel, whereas most areas of the west aquifer part can only store less than 750 × 10³ m³/voxel. The maximum storativity was attributed to the Horseshoe Canyon Formation, which contains maximal geological reserves ranging from 107 to 111 × 10⁹ m³. The main contribution of this research is the proposed 3D geological model with hydrogeological insights into the study area, as well as the use of a new statistical method to propagate the uncertainty over the modeling domain. The next step will focus on the hydrodynamic modeling of groundwater flow to better manage water resources in the Saskatchewan River Basin. Full article

The hummocky Balaton Highland is located in western Hungary and is part of the Transdanubian Mountains, the most extensive carbonate aquifer system in Hungary. The study region also encompasses Lake Balaton, the biggest lake in central Europe, which is to the south of Balaton Highland. The surface water–groundwater interaction in the Balaton Highland–Lake Balaton region and the groundwater contribution to Lake Balaton are revisited in this paper. Hydrostratigraphic classification was performed first; then, groundwater flow directions by hydraulic head distribution were analysed, and baseflow indices of surface watercourses were calculated. Regarding hydrochemical characterisation, general hydrochemical facies were identified, natural tracers of temperature, chloride and uranium were applied, and the stable isotopic composition of oxygen and hydrogen was determined. Finally, groundwater flow and heat transport were simulated in a 2D numerical model. A high level of hydraulic interaction was evidenced between surface water and groundwater and the sub-regions of Bakony Mountains, Balaton Highland and Lake Balaton by physical and chemical parameters, numerical simulation and groundwater-flow-related natural manifestations, revealing hydraulic continuity in the study region. Based on the results, the division of legislative water bodies can be reconsidered, especially that surface water and groundwater should be regarded as interconnected, and Lake Balaton can be considered a groundwater-dependent ecosystem in any water-use planning in the region. Full article

In South Australia’s Eyre Peninsula, groundwater provides 85% of the region’s reticulated water supply. Fresh groundwater resides within shallow karstic limestone aquifers recharged by incident rainfall. Water levels are very responsive to short-term climate variability and are at risk of sustained decline due to long-term drying trends and the further rainfall declines indicated by projections of future climate, thereby increasing risk to water security and groundwater-dependent ecosystems. In 2009, a new adaptive resource management approach was enabled through legislative reform that better addresses climate variability, particularly where aquifer robustness is low. This allows the volume of water available for licensed allocations to be varied annually depending on the current condition of the aquifer resources. A three-tiered trigger level policy varies the rate at which water allocations are limited in proportion to monitored changes in groundwater storage. The three trigger thresholds are specified for each discrete groundwater resource, based on levels of risk. We now have more than five years of observations and practice of this approach to learn of its efficacy and consequences for water users, the water resources, and the environment. It has proved to be an effective way to deal with the uncertainties in how and when climate may change and how water management principles can effectively respond. Our case study provides an example of the importance of legislative reform to enable adaptive water resource management to effectively tackle the challenges of water planning in a drying climate. Full article

Geological models are very useful tools for developing conceptual schemes owing to their capacity to optimize the management of stratigraphic information. This is particularly true in areas where archaeological heritage is exposed to hydrogeological hazards; 3D models can constitute the first step toward the construction of numerical models created to understand processes and plan mitigation actions to improve visitor safety and preserve archaeological heritage. This paper illustrates the results of a 3D hydrostratigraphic model of the site of the Colosseum in the Central Archaeological Area of Rome. In recent years, this area has experienced numerous floods caused by intense meteorological events. A new borehole survey provided the opportunity to update previous maps and cross sections and build a local scale 3D model. The resulting conceptual model was used to identify primary gaps in existing knowledge about the groundwater system and to optimize the planning of a piezometer monitoring network. Further studies can then focus on the development of groundwater numerical models to verify hypotheses regarding inflow-outflow dynamics and facilitate the optimization of water management. Full article

Shallow aquifers of coastal and internal alluvial plains of developed countries are commonly characterized by the challenging management of groundwater resources due to the intense agricultural and industrial activities that determine a high risk of groundwater contamination. Among the principal origins of pollution in these areas are agricultural practices based on the amendment of soils by nitrate fertilizers, which have been recognized as one of the most severe environmental emergencies for which specific policies and regulations have been issued (e.g., EU Directive 2006/118/EC). In such a framework, the results of research aimed at assessing the specific vulnerability of shallow alluvial aquifers to nitrate fertilizer pollutants by coupled process-based and empirical approaches are here proposed. The research focused on assessing the specific vulnerability to nitrate pollution of a shallow alluvial aquifer of the Campania region (southern Italy), which was selected due to its representativeness to other recurrent hydrogeological settings occurring in alluvial plains of the region and worldwide. In this area, 1D hydro-stratigraphic models of the unsaturated zone were reconstructed and applied for simulating the transport of nitrate pollutants at the water table and estimating the associated travel times. Numerical modeling was carried out by the finite differences VS2TDI code and considered a 10-year time series of rainfall and evapotranspiration as well as typical local farming practices of nitrate fertilizer input. Results of the travel time calculated for the 1D hydro-stratigraphic models considered and at different depths were recognized as a proxy to assess the specific vulnerability to nitrate fertilizer pollution. Among the principal outcomes is an empirical multiple correlation between the travel time of the nitrate fertilizer pollutant, water table depth, and equivalent saturated hydraulic conductivity of the unsaturated zone or hydraulic resistance, which was used to assess the travel time at the distributed scale over the whole area studied as well as the related specific vulnerability. Given such results, the coupled process-based and empirical approach is proposed as generally applicable for assessing and mapping groundwater vulnerability in shallow aquifers, for which detailed stratigraphic and piezometric data are available. Full article

Impermeable aquifer boundaries affect the flow of groundwater, transport of contaminants, and the drawdown of water levels in response to pumping. Hydraulic methods can detect the presence of such boundaries, but these methods are not suited for mapping complex, 3D geological bodies. Airborne electromagnetic (AEM) methods produce 3D geophysical images of the subsurface at depths relevant to most groundwater investigations. Interpreting a geophysical model requires supporting information, and hydraulic heads offer the most direct means of assessing the hydrostratigraphic function of interpreted geological units. This paper presents three examples of combined hydraulic and AEM analysis of impermeable boundaries in glacial deposits of eastern Nebraska, USA. Impermeable boundaries were detected in a long-term hydrograph from an observation well, a short-duration pumping test, and a water table map. AEM methods, including frequency-domain and time-domain AEM, successfully imaged the impermeable boundaries, providing additional details about the lateral extent of the geological bodies. Hydraulic head analysis can be used to verify the hydrostratigraphic interpretation of AEM, aid in the correlation of boundaries through areas of noisy AEM data, and inform the design of AEM surveys at local to regional scales. Full article