Search Results (10)

Sustainable mobility is one of the main challenges on a global level. In this context, the emerging Mobility as a Service (MaaS) plays an important role in the mobility of people. This paper investigates the main enabling factors for implementing the MaaS paradigm, with a specific focus on the level of acceptance of this new technology. To achieve this objective, the proposed methodology for measuring the potential MaaS acceptance is based on a set of pilot surveys. The methodology integrates motivational surveys with Stated and Revealed Preference (SP, RP) and Technology Acceptance Models (TAM). The collected data are processed to obtain indicators that measure the potential level of MaaS acceptance. The main results of the two pilot experiments are illustrated by referring to urban and extra-urban mobility with or without physical barriers. The results obtained show that the level of MaaS acceptance grows with the increase in generalized transport costs perceived by the users. Full article

The reduction of urban congestion represents one of the main challenges for increasing sustainability. This implies the necessity to increase our knowledge of urban mobility and traffic. The fundamental diagram (FD) is a possible tool for analyzing the traffic conditions on an urban road link. FD is commonly associated with the links of a transport network, but it has recently been extended to the whole transport network and named the network macroscopic fundamental diagram (NMFD). When used at the link or network level, the FD is important for supporting the simulation, design, planning, and control of the transport system. Recently, floating car data (FCD), which are based on vehicles’ trajectories using GPS, are able to provide the trajectories of a number of vehicles circulating on the network. The objective of this paper is to integrate FCD with traffic data obtained from traditional loop-detector technology for building FDs. Its research contribution concerns the proposal of a methodology for the extraction of speed data from taxi FCD, corresponding to a specific link section, and the calibration of FDs from FCD and loop detector data. The methodology has been applied to a real case in the city of Santander. The first results presented are encouraging, supporting the paper’s thesis that FCD can be integrated with data obtained from loop detectors to build FD. Full article

In this paper, a pilot study of a pre-test preference model in the context of mobility as a service (MaaS) is defined by following the steps required for transport system engineering: survey, specification, calibration, and validation. The availability of a MaaS preference model is crucial to support decision takers and decision makers before starting planning activities for new, sustainable transport services. In this paper, a pre-test model is proposed for evaluating user preferences. The pre-test model was specified with a Logit random utility model and the parameters were estimated using the maximum likelihood method. To define the preference model, a pilot survey was conducted in the Gioia Tauro area, an extra-urban area in southern Italy. For the pre-test model, a pilot sample of users was considered. In the area, a high percentage of users traveled by an individual transport system; this high percentage was also present in the survey, with 76% traveling by private car. Short- and long-distance scenarios were proposed to users. In the calibrated model, it emerged that bundles were more attractive for long-distance journeys and decreased with the cost of the package. The additional cost in the present scenario influenced the preference for bundle cost. Considering the parking cost in the present scenario (scenario 2), the MaaS preference probability started at higher probability values but increased less quickly. The pre-test model was defined starting from a pilot sample and represents the basis for a larger MaaS preference model built starting from a larger survey and a sample with a greater number of calibrated parameters. Full article

Given two pick-up and delivery points, the best path chosen does not necessarily follow the criteria of minimum travel time or generalized minimum cost evaluated with a deterministic approach. Given a criterion, the perceived cost is not deterministic for many reasons (congestion, incomplete information on the state of the system, inexact prediction of the system state, etc.). The same consideration applies to the best-chosen route, assuming that the route is an ordered list of network nodes to visit. The paths and routes perceived and chosen (drivers or companies) could follow different criteria (i.e., minizmum congested travel time for the path and minimum monetary cost for the route). In this context, the paths chosen between two pick-up and delivery points, studied with the path choice problem (PCP), influence the best route, studied with the vehicle routing problem (VRP). This paper reports some considerations on the importance of modelling the path choice behavior in the VRP; the influence of the PCP on the VRP is studied. The considerations are supported by a numerical example in a small network in which the results obtained by adopting the deterministic or probabilistic models for the PCP are compared. To validate the reported thesis, the models are applied in a small test system, and it allows the reader to follow the numerical results step by step. Full article

Passenger mobility plays an important role in today’s society and optimized transport services are a priority. In recent years, MaaS (Mobility as a Service) has been studied and tested as new integrated services for users. In this paper, MaaS is studied considering the sustainability objectives and goals to be achieved with particular reference to the consolidated methodologies adopted in the transport systems engineering for design, management, and monitoring of transport services; it is defined as Sustainable MaaS (S-MaaS). This paper considers the technological and communication platform essential and assumed to be a given considering that it has been proposed in many papers and it has been tested in some areas together with MaaS. Starting from the MaaS platform, the additional components and models necessary for the implementation of an S-MaaS are analyses in relation to: a Decision Support System (DSS) that supports MaaS public administrations and MaaS companies for the design of the service and demand management; a system for the evaluation of intervention policies; and also considers smart planning for a priori and a posteriori evaluation of sustainability objectives and targets. Full article

Mobility as a Service (MaaS) is the new approach in transportation systems that allows users to use different transport services as a single option, by using digital platforms and with integrated design. In MaaS many actors can be identified: MaaS operators, MaaS companies, MaaS users, citizens, system manager/planner. In order to be able to design the system in an integrated way, it is necessary to identify comprehensive methodologies that make it possible to reach sustainability targets in a context where the decisions to be taken are shared between several operators and affect users and citizens. In this paper, the methods to be adopted for the design of an integrated transport service system have been studied. The main aim of this paper concerns the specification of transport system models for estimating the effects of decision-makers’ actions on MaaS. The consolidated design methodologies of transport networks have been extended in the context of the MaaS. The paper reports a methodology that can be used and describes the main models to be used, which derive from consolidated specifications in the field of transport systems engineering. The methodologies have to be integrated into Intelligent and Communication Technology systems to build the Intelligent Transport System in the MaaS environment. Full article

This paper focuses on the estimation of energy consumption of Electric Vehicles (EVs) by means of models derived from traffic flow theory and vehicle locomotion laws. In particular, it proposes a bi-level procedure with the aim to calibrate (or update) the whole parameters of traffic flow models and energy consumption laws by means of Floating Car Data (FCD) and probe vehicle data. The reported models may be part of a procedure for designing and planning transport and energy systems. This aim is to verify if, and in what amount, the existing parameters of the resistances/energy consumptions model calibrated in the literature for Internal Combustion Engines Vehicles (ICEVs) change for EVs, considering the above circular dependency between supply, demand, and supply–demand interaction. The final results concern updated parameters to be used for eco-driving and eco-routing applications for design and a planning transport system adopting a multidisciplinary approach. The focus of this manuscript is on the transport area. Experimental data concern vehicular data extracted from traffic (floating car data and probe vehicle data) and energy consumption data measured for equipped EVs performing trips inside a sub-regional area, located in the Città Metropolitana of Reggio Calabria (Italy). The results of the calibration process are encouraging, as they allow for updating parameters related to energy consumption and energy recovered in terms of EVs obtained from data observed in real conditions. The latter term is relevant in EVs, particularly on urban routes where drivers experience unstable traffic conditions. Full article

This paper attempts to integrate data from models, traditional surveys and big data in a situation of limited information. The goal is to increase the capacity of transport planners to analyze, forecast, and plan passenger mobility. (Big) data are a precious source of information and substantial effort is necessary to filter, integrate, and convert big data into travel demand estimates. Moreover, data analytics approaches without demand models are limited because they allow: (a) the analysis of historical and/or real-time transport system configurations, and (b) the forecasting of transport system configurations in ordinary conditions. Without the support of travel demand models, the mere use of (big) data does not allow the forecasting of mobility patterns. The paper attempts to support traditional methods of transport systems engineering with new data sources from ICTs. By combining traditional data and floating car data (FCD), the proposed framework allows the estimation of travel demand models (e.g., trip generation and destination). The proposed method can be applied in a specific case of an area where FCD are available, and other sources of information are not available. The results of an application of the proposed framework in a sub-regional area (Calabria, southern Italy) are presented. Full article

According to the literature, the path choice decision process of a user of a (road) transport network, named path choice problem (PCP), is composed of two levels/models: the definition of perceived alternative paths (choice set) and the choice of one path in the path choice set. The path choice probability can be estimated with two models: a choice model of the path choice set and a choice model of a path (Mansky paradigm). In this research, the paper’s contribution concerns two elements: extension of the PCP paradigm (two-level models) consolidated in the literature to the route choice decision process (vehicle routing problem (VRP)) and identification of common elements in the PCP and VRP concerning the criteria in the two decision levels and the procedure for route and path selection and choice. The experiment concerns the comparison of observed routes with simulated and optimized routes of commercial vehicles to analyse the level of similarity and coverage. The observed routes are extracted from floating car data (FCD) from commercial vehicles travelling inside a study area inside the Calabria Region (Southern Italy). The comparison is executed in terms of similarity of the sequences of nodes visited between observed routes and simulated/optimized routes. Full article

The paper deals with the integration of data provided from traditional transport surveys (small data) with big data, provided from Information and Communication Technology (ICT), in building Transport System Models (TSMs). Big data are used to observe historical mobility patterns and transport facilities and services, but they are not able to assess ex-ante effects of planned interventions and policies. To overcome these limitations, TSMs can be specified, calibrated and validated with small data, but they are expensive to obtain. The paper proposes a procedure to increase the benefits of TSMs’ building in forecasting capabilities, on one side; and limiting the costs connected to traditional surveys thanks to the availability of big data, on the other side. Small data (e.g., census data) are enriched with Floating Car Data (FCD). At the current stage, the procedure focuses on two specific elements of TSMs: zoning and graph building. These processes are both executed considering the estimated values of an intensity function of FCDs, consistently with traditional methods based on small data. The data-fusion of small and big data, operated with a Geographic Information System (GIS) tool, in a real extra-urban context is presented in order to validate the proposed procedure. Full article