Next Article in Journal
Setting the Emissivity of an Imaging Bolometer in the Surface Temperature Profile Measurement of SiC-Based MEMS Heaters
Previous Article in Journal
Investigation and Improvement of Inconsistency in Surface-Form Measurement Results Due to Difference of Incident Direction of Measuring Light in Abramson-Type Oblique-Incident Interferometer
Previous Article in Special Issue
A Statistical Approach for Characterizing the Behaviour of Roughness Parameters Measured by a Multi-Physics Instrument on Ground Surface Topographies: Four Novel Indicators
 
 

Order Article Reprints

Journal: Metrology, 2025
Volume: 5
Number: 35

Article: Revisiting an Indentation Method for Measuring Low Wear Rates Using 3D Interferometry
Authors: by Gabriela R. Piazzetta, Thomas M. Zeller, Juan M. Hernandez-Otalvaro and Giuseppe Pintaude
Link: https://www.mdpi.com/2673-8244/5/2/35

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop