Geomatics, Volume 3, Issue 4 (December 2023) – 7 articles

Previous research showed that living closer to bus stops could be a factor in promoting a healthy and active lifestyle. However, most of the studies relied on self-reported measures of distance, which might be affected by several confounders. In this study, self-reported distances among study participants were compared to actual ones, computed by the use of GIS (Geographic Information System) technology and routing algorithms. We tested whether distance to the bus stop is associated with health and socioeconomic conditions of the respondents, using data among 2398 older people (75–90 years) in three cities in Sweden. We found that several variables including older age, female gender, living alone, and worse health status are associated with an over-estimation of bus stop distance. People who use public transport daily or several times a week and are satisfied with the walking environment in the neighbourhood tend to underestimate bus stop distances. Evidence based on self-reported measures only should be treated cautiously. Considering the limitations still present in open-data-based routing algorithms, the best indication is to combine the subjective with the objective measure of distance. Having the possibility to combine the two measures appears as a sound strategy to overcome the limitations associated with each single measure. Full article

Laser scanning technology has long been the preferred method for capturing interior scenes in various industries. With a growing market, smaller and more affordable scanners have emerged, offering end products with sufficient accuracy. While not on par with professional scanners, Apple has made laser scanning technology accessible to users with the introduction of the new iPhone Pro models, democratizing 3D scanning. Thus, this study aimed to assess the performance of the iPhone’s lidar technology as a low-cost solution for building documentation. Four scanning applications were evaluated to determine the accuracy, precision, and user experience of the generated point clouds compared with a terrestrial laser scanner. The results reveal varying performances on the same device, highlighting the influence of software. Notably, there is room for improvement, particularly in tracking the device’s position through software solutions. As it stands, the technology is well suited for applications such as indoor navigation and the generation of quick floor plans in the context of building documentation. Full article

OpenStreetMap (OSM) is among the most prominent Volunteered Geographic Information (VGI) initiatives, aiming to create a freely accessible world map. Despite its success, the data quality of OSM remains variable. This study begins by identifying the quality metrics proposed by earlier research to assess the quality of OSM building footprints. It then evaluates the quality of OSM building data from 2018 and 2023 for five cities within Québec, Canada. The analysis reveals a significant quality improvement over time. In 2018, the completeness of OSM building footprints in the examined cities averaged around 5%, while by 2023, it had increased to approximately 35%. However, this improvement was not evenly distributed. For example, Shawinigan saw its completeness surge from 2% to 99%. The study also finds that OSM contributors were more likely to digitize larger buildings before smaller ones. Positional accuracy saw enhancement, with the average error shrinking from 3.7 m in 2018 to 2.3 m in 2023. The average distance measure suggests a modest increase in shape accuracy over the same period. Overall, while the quality of OSM building footprints has indeed improved, this study shows that the extent of the improvement varied significantly across different cities. Shawinigan experienced a substantial increase in data quality compared to its counterparts. Full article

Sea-level rise (SLR) is a critical consequence of climate change, posing significant threats to coastal regions worldwide. Accurate and efficient assessment of potential inundation areas is crucial for effective coastal planning and adaptation strategies. This study aimed to explore the utility of free and open-source software for geospatial (FOSS4G) tools for mapping SLR inundation, providing cost-effective solutions that are accessible to researchers and policymakers. We employed a combination of geospatial data, including high-resolution elevation models, tidal data, and projected SLR scenarios. Utilizing widely available FOSS4G tools, like QGIS, GDAL/OGR, and GRASS GIS, we developed an integrated workflow to map inundation extents, using a passive bathtub approach for various SLR scenarios. We demonstrate the approach through a case study in Virginia Key, Florida, however, the methodology can be replicated in any area where the input datasets are available. This paper demonstrates that FOSS4G tools offer a reliable and accessible means to map SLR inundation, empowering stakeholders to assess coastal vulnerabilities and to devise sustainable adaptation measures. The open-source approach facilitates collaboration and reproducibility, fostering a comprehensive understanding of the potential impacts of SLR on coastal ecosystems and communities. Full article

Detecting changes in soil micro-relief in farmland helps to understand degradation processes like sheet erosion. Using the high-resolution technique of terrestrial laser scanning (TLS), we generated point clouds of three 2 × 3 m plots on a weekly basis from May to mid-June in 2022 on cultivated farmland in Germany. Three well-known applications for eliminating vegetation points in the generated point cloud were tested: Cloth Simulation Filter (CSF) as a filtering method, three variants of CANUPO as a machine learning method, and ArcGIS PointCNN as a deep learning method, a sub-category of machine learning using deep neural networks. We assessed the methods with hard criteria such as F1 score, balanced accuracy, height differences, and their standard deviations to the reference surface, resulting in data gaps and robustness, and with soft criteria such as time-saving capacity, accessibility, and user knowledge. All algorithms showed a low performance at the initial measurement epoch, increasing with later epochs. While most of the results demonstrate a better performance of ArcGIS PointCNN, this algorithm revealed an exceptionally low performance in plot 1, which is describable by the generalization gap. Although CANUPO variants created the highest amount of data gaps, we recommend that CANUPO include colour values in combination with CSF. Full article

Recently, the move from cost-tied to open-access data has led to the mushrooming of research in pursuit of algorithms for estimating the aboveground grass biomass (AGGB). Nevertheless, a comprehensive synthesis or direction on the milestones achieved or an overview of how these models perform is lacking. This study synthesises the research from decades of experiments in order to point researchers in the direction of what was achieved, the challenges faced, as well as how the models perform. A pool of findings from 108 remote sensing-based AGGB studies published from 1972 to 2020 show that about 19% of the remote sensing-based algorithms were tested in the savannah grasslands. An uneven annual publication yield was observed with approximately 36% of the research output from Asia, whereas countries in the global south yielded few publications (<10%). Optical sensors, particularly MODIS, remain a major source of satellite data for AGGB studies, whilst studies in the global south rarely use active sensors such as Sentinel-1. Optical data tend to produce low regression accuracies that are highly inconsistent across the studies compared to radar. The vegetation indices, particularly the Normalised Difference Vegetation Index (NDVI), remain as the most frequently used predictor variable. The predictor variables such as the sward height, red edge position and backscatter coefficients produced consistent accuracies. Deciding on the optimal algorithm for estimating the AGGB is daunting due to the lack of overlap in the grassland type, location, sensor types, and predictor variables, signalling the need for standardised remote sensing techniques, including data collection methods to ensure the transferability of remote sensing-based AGGB models across multiple locations. Full article

Open-source software applications, especially those useful for GIS, have been used in the field of geology both in research and teaching at the University of Urbino for decades. The experiences described in this article range from land-surveying cases to cartographic processing and 3D printing of geological models. History of their use and development is punctuated by trials, failures, and slowdowns, but the idea of using digital tools in areas where they are traditionally frowned upon, such as in soil geology, is now rooted in and validated by applications in projects of various types. Although the current situation is not definitive, given that the evolution of information technology provides increasingly faster tools that are performance-oriented and easier to use, this article aims to contribute to the development of methodologies through an exchange of information and experiences. Full article