Next Article in Journal
An Interface Extension for the New EPANET 2.X
Previous Article in Journal
Optimal Regulation of Variable Speed Pumps in Sewer Systems
 
 
Environmental Sciences Proceedings concluded publication with Volume 29, Issue 1. It has been succeeded by Environmental and Earth Sciences Proceedings, which has a revised scope and a new editorial direction and is now published here. To preserve historical data integrity, the information on this webpage is retained but will no longer be updated.
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Proceeding Paper

Leakage Calibration in Water Distribution Networks with Pressure-Driven Analysis: A Real Case Study †

1
Departamento de Engenharia Civil, Instituto Politécnico de Coimbra, ISEC, Rua Pedro Nunes, 3030-199 Coimbra, Portugal
2
INESC Coimbra, DEEC, Universidade de Coimbra, Rua Sílvio Lima, Polo II, 3030-290 Coimbra, Portugal
3
Be Water-Águas de Ourém, Rua Dr. Carlos Vaz de Faria e Almeida, nº21 R/C, 2490-547 Ourém, Portugal
4
Departamento de Informática, Universidade da Beira Interior, Rua Marquês d’Ávila e Bolama, 6201-001 Covilhã, Portugal
5
Departamento de Engenharia Civil, Universidade de Coimbra, Rua Luís Reis Santos, Polo II, 3030-788 Coimbra, Portugal
*
Author to whom correspondence should be addressed.
Presented at the 4th EWaS International Conference: Valuing the Water, Carbon, Ecological Footprints of Human Activities, Online, 24–27 June 2020.
Environ. Sci. Proc. 2020, 2(1), 59; https://doi.org/10.3390/environsciproc2020002059
Published: 6 September 2020

Abstract

Leakage in water distribution networks (WDN) is still a major concern for water companies. In recent years, the scientific community has dedicated some effort to the leakage calibration issue to obtain accurate models. But leakage modelling implies the use of a pressure-driven approach as well as specific data to define the pressure/leakage relationship. This paper presents the calibration process of a real case study WDN model. The process started with pressure step tests, the model was built in WaterNetGen and the leakage calibration process was performed by a simulated annealing algorithm. As illustrated, after calibration the model was able to produce accurate results.
Keywords: calibration; water losses; leakage; pressure-driven; WaterNetGen; EPANET calibration; water losses; leakage; pressure-driven; WaterNetGen; EPANET

Share and Cite

MDPI and ACS Style

Sousa, J.; Martinho, N.; Muranho, J.; Marques, A.S. Leakage Calibration in Water Distribution Networks with Pressure-Driven Analysis: A Real Case Study. Environ. Sci. Proc. 2020, 2, 59. https://doi.org/10.3390/environsciproc2020002059

AMA Style

Sousa J, Martinho N, Muranho J, Marques AS. Leakage Calibration in Water Distribution Networks with Pressure-Driven Analysis: A Real Case Study. Environmental Sciences Proceedings. 2020; 2(1):59. https://doi.org/10.3390/environsciproc2020002059

Chicago/Turabian Style

Sousa, Joaquim, Nuno Martinho, João Muranho, and Alfeu Sá Marques. 2020. "Leakage Calibration in Water Distribution Networks with Pressure-Driven Analysis: A Real Case Study" Environmental Sciences Proceedings 2, no. 1: 59. https://doi.org/10.3390/environsciproc2020002059

APA Style

Sousa, J., Martinho, N., Muranho, J., & Marques, A. S. (2020). Leakage Calibration in Water Distribution Networks with Pressure-Driven Analysis: A Real Case Study. Environmental Sciences Proceedings, 2(1), 59. https://doi.org/10.3390/environsciproc2020002059

Article Metrics

Back to TopTop