Next Article in Journal
Effect of Internal Structure in the Compression Behavior of Casted Al/LECA Composite Foams
Previous Article in Journal
A Numerical Study on High Velocity Impact Behavior of Titanium Based Fiber Metal Laminates
Previous Article in Special Issue
Prediction of Young’s Modulus for Injection Molded Long Fiber Reinforced Thermoplastics
Article Menu

Export Article

Open AccessEditorial

Editorial for the Special Issue on Discontinuous Fiber Composites

Polymer Engineering Center, Department of Mechanical Engineering, University of Wisconsin-Madison, Madison, WI 53706, USA
J. Compos. Sci. 2018, 2(4), 63;
Received: 11 October 2018 / Accepted: 16 October 2018 / Published: 23 October 2018
(This article belongs to the Special Issue Discontinuous Fiber Composites)
PDF [168 KB, uploaded 23 October 2018]
Note: In lieu of an abstract, this is an excerpt from the first page.


The papers published in this special edition of the Journal of Composites Science will give the polymer engineer and scientist insight into what the existing challenges are in the discontinuous fiber composites field, and how these challenges are being addressed by the research community. [...] View Full-Text
This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited (CC BY 4.0).
Printed Edition Available!
A printed edition of this Special Issue is available here.

Share & Cite This Article

MDPI and ACS Style

Osswald, T.A. Editorial for the Special Issue on Discontinuous Fiber Composites. J. Compos. Sci. 2018, 2, 63.

Show more citation formats Show less citations formats

Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.

Article Metrics

Article Access Statistics



[Return to top]
J. Compos. Sci. EISSN 2504-477X Published by MDPI AG, Basel, Switzerland RSS E-Mail Table of Contents Alert
Back to Top