Biomimetics as a Functional Engineering Framework for Mechanical Systems: A PRISMA-Guided Systematic Mapping of Sensing, Inspection, Access Robotics, and Condition Monitoring (2016–2026)

Mechanical engineering systems must sense, inspect, and navigate constrained environments and operate adaptively under uncertainty—requirements that map structurally onto capabilities achieved by biological systems through distributed sensing, morphology-driven locomotion, multimodal perception, and decentralised control. Biomimetics can therefore be interpreted not merely as a source of design inspiration but also as a functional engineering framework relevant to industrial monitoring, inspection, maintenance, and autonomous operation. This study presents a PRISMA 2020-guided systematic mapping review of the biomimetics literature explicitly relevant to mechanical-engineering functions over the decade 2016–2026. A Scopus corpus of 11,114 records was screened through a two-stage abstract-level process. After deduplication and broad relevance filtering, a stricter eligibility audit retained 505 studies assignable to five predefined functional clusters: robotics and access (235 records; 46.5%), mechanical surfaces and tribology (141; 27.9%), sensing and monitoring (106; 21.0%), vision and inspection (14; 2.8%), and control and computation (9; 1.8%). Publication output accelerated markedly after 2022, with 2025 yielding the highest annual count. The principal gap identified is not a shortage of biomimetic concepts, but their limited consolidation into deployable industrial inspection and maintenance architectures. A translational taxonomy connecting biological principles, engineering abstractions, enabling technologies, and mechanical use cases is proposed as an interpretive structuring tool for future research prioritisation and technology-readiness discussion.