The authors wish to make the following corrections in Section 3.1 and Figure 5 of the original article [1], regarding the omitted reference and logical error, respectively.
Errors in References Citation
In terms of defining the static attribute set and process attribute set, the author refers to the idea of article [2] and applies it to the intelligent manufacturing workshop of a lithium-ion battery. Due to negligence and operational errors in the references, [23] was quoted incorrectly. Therefore, the reference [23] in the original article was changed to reference [2]. The authors apologize for any inconvenience caused and state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.
Error in Figure 5
In accordance with the classification method of the attribute set and unit component set in the information model hierarchy, the schematic diagram of information model in Figure 5 is revised, as presented below. The authors apologize for any inconvenience caused and state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.
Figure 5.
Schematic diagram of information model of lithium-ion battery intelligent manufacturing workshop.
References
- Han, Y.; Hu, Y.; Wang, Y.; Jia, G.; Ge, C.; Zhang, C.; Huang, X. Research and Application of Information Model of a Lithium Ion Battery Intelligent Manufacturing Workshop Based on OPC UA. Batteries 2020, 6, 52. [Google Scholar] [CrossRef]
- Wang, L.; Zhang, Z.; Shao, Z.; Wang, M. Research on the Information Model of Digital Machining Workshop for Machine Tools and Its Applications. J. Mech. Eng. 2019, 5, 9. [Google Scholar] [CrossRef]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content. |
© 2023 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).