An Innovative Filtering System for the Handling of Asbestos-Based Products: Improvement of Safety and Quality of Work in Analysis Laboratories

Although being banned or restricted in many countries since the early 1990s, large quantities of asbestos are still used or present in building materials all over the world and its removal or handling requires specific systems that limit exposure to airborne fibers The exposure to asbestos causes chronic diseases such as asbestosis and lung cancer with an incubation period of 20 to 50 years. Among the operators most exposed to contamination are those who handle and analyze the materials in laboratories. For this reason, our work focused on an innovative method for removing a filter unit from a laboratory extraction hood, in order to improve the safety conditions for the operators and the surrounding environment. The hood has a particular construction technology with a mechanism that allows the spraying of a special encapsulating liquid on the ULPA filters below the work-bench, which is capable of forming a film and blocking the fibers on the surface of the same filter. The fibers are irreversibly bounded and can no longer be released into the surrounding environment. The monitoring of activity highlighted the absence of asbestos fibers in the air after installation of the filter and workers feel safer performing their activities. The introduction of an innovative filtering system enhanced the safety of work activities involving asbestos exposure, moreover, the time spent on the hood’s maintenance and the risk perception of workers were improved.