Next Article in Journal
STAGCN: Spatial–Temporal Attention Graph Convolution Network for Traffic Forecasting
Previous Article in Journal
Event-Triggered Consensus Control of Nonlinear Strict Feedback Multi-Agent Systems
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Exponential Stability for the Equations of Porous Elasticity in One-Dimensional Bounded Domains

by
Tijani A. Apalara
1,*,† and
Aminat O. Ige
2,†
1
Department of Mathematics, University of Hafr Al-Batin (UHB), Hafr Al-Batin 31991, Saudi Arabia
2
Department of Mathematics, Lagos State University (LASU), Ojo 102101, Nigeria
*
Author to whom correspondence should be addressed.
These authors contributed equally to this work.
Mathematics 2022, 10(9), 1597; https://doi.org/10.3390/math10091597
Submission received: 3 March 2022 / Revised: 6 May 2022 / Accepted: 7 May 2022 / Published: 8 May 2022

Abstract

:
This work establishes an exponential stability result for a porous-elastic system, where the dissipation mechanisms act on the porous and elastic equations. Our result completes some of the results in the literature for unbounded domains.

1. Introduction

In this article, we investigate the following one-dimensional isothermal porous elastic problem with dissipation mechanics acting on the porous and elastic equations
ρ u t t α u x x β ϕ x γ u x x t ε 1 ϕ x t = 0 , t > 0 , x ( 0 , l ) , κ ϕ t t δ ϕ x x + β u x + η ϕ + τ ϕ t + ε 2 u x t = 0 , t > 0 , x ( 0 , l ) , u ( x , 0 ) = u 0 ( x ) , u t ( x , 0 ) = u 1 ( x ) , ϕ ( x , 0 ) = ϕ 0 ( x ) , ϕ t ( x , 0 ) = ϕ 1 ( x ) , x ( 0 , l ) , u x ( 0 , t ) = u x ( l , t ) = ϕ ( 0 , t ) = ϕ ( l , t ) = 0 , t > 0 ,
where the unknown scalar functions u and ϕ represent the displacement of the elastic material and the volume fraction, respectively. The coefficients satisfy
ρ > 0 , α > 0 , β 0 , γ > 0 , ε 1 0 , ε 2 0 , κ > 0 , δ > 0 , η > 0 , τ > 0 .
Furthermore, to guarantee that the internal energy is positive, we assume α η > β 2 . From a physical point of view, the system describes the interpolation of two structures: the elastic structure, which is macroscopic, and the porous structure, which can be described as microscopic. Such coupling produces internal or external forces leading to thermomechanical displacement, which are generally harmful to the system after some time. Various types of damping mechanisms are used in the literature to control the displacements. The porous-elastic materials have wide applications in petroleum engineering, material science, physics, biology, and soil mechanics. It also applies to solids characterized by tiny distributed pores such as rocks, wood, and bones, as mentioned in [1]. Júnior et al. [2] considered system (1) for ε 1 = ε 2 = ε and established a lack of exponential stability result with the condition γ τ = ε 2 . Moreover, they proved an optimal polynomial stability result subject to a particular relationship between the damping parameters of the system. For the system in the whole space, that is, t > 0 , x R , we mention the work of Quintanilla and Ueda [3]. They obtained a standard decay structure with the assumption 4 γ τ > ε 1 + ε 2 2 . Furthermore, they proved that if ε 1 = ε 2 and either γ = 0 , τ > 0 or γ > 0 , τ = 0 , then the decay structure is of regularity-loss type.
Quintanilla [4] discussed system (1) when γ = ε 1 = ε 2 = 0 , τ > 0 and concluded that the frictional damping ( τ ϕ t ) was not strong enough to exponentially stabilize the system. However, Apalara [5] proved that the system was exponentially stable provided α κ = δ ρ . Similarly, when τ = ε 1 = ε 2 = 0 , γ > 0 , Magańa and Quintanilla [6] proved that the system was not exponentially stable. On the other hand, when ε 1 = ε 2 = 0 , τ > 0 , γ > 0 , they obtained an exponential stability result. For some other interesting results on the porous-elastic system, we refer the reader to a non-exhaustive list of references [7,8,9,10,11,12,13,14,15,16]. We especially refer the reader to [1] for the results on some variants and a general system of (1).
Below, we mention some results concerning system (1) with other damping mechanisms. Pamplona et al. [17] considered a system of porous-thermoelasticity with microtemperatures, that is
ρ u t t α u x x β ϕ x γ u x x t ε 1 ϕ x t + β 1 θ x 1 w x x = 0 , κ ϕ t t δ ϕ x x + β u x + η ϕ + τ ϕ t + ε 2 u x t m θ + d 1 w x k 1 θ x x μ ϕ x x t = 0 , c 1 θ t k θ x x + β 1 u x t + m φ t σ 1 w x σ 2 ϕ x x t = 0 , c 2 w t σ 3 w x x d 2 φ x t + k 3 θ x + k 4 w 2 u x x t = 0 ,
for t > 0 and x ( 0 , π ) , where θ and w are the temperature difference and microtemperature, respectively. They proved that when μ = k 1 = σ 2 = 0 , the semigroup generated by the solutions was not analytic, though the system was exponentially stable. However, when ε 1 = ε 2 = τ = 0 , they found that the semigroup, which defined the solutions was analytic. Analyticity means that the functions and the orbits are regular; hence, time derivatives can recover the solutions. In the absence of microtemperature, Casas and Quintanilla [18] investigated (2) for γ = ε 1 = 1 = ε 2 = d 1 = k 1 = μ = σ 1 = σ 2 = 0 and established an exponential stability result. However, when τ was also zero, they proved in [19] that the heat effect alone was not strong enough to bring about an exponential stability result. Contrarily, Santos et al. [20] proved that the heat effect alone was strong enough to stabilize the system exponentially, provided that α κ = δ ρ . Interestingly, when γ 0 , Pamplona et al. [21] showed that the system was also not exponentially stable. We refer the reader to [22,23,24,25,26] for some other interesting results.
In the present work, we considered system (1) and proved an exponential stability result for the case 4 γ τ > ε 1 + ε 2 2 . We refer the reader to [2] for the well-posedness (existence, uniqueness, and continuous dependence on the initial data) result of the system. Meanwhile, due to the boundary conditions on u, system (1) can have solutions which do not decay. In addition, the boundary conditions prevent the use of Poincaré’s inequality on u. To avoid these cases, we performed the following necessary transformation. From the first equation in (1), we have
ρ 0 l u t t d x = α 0 l u x x d x + β 0 l ϕ x d x + γ 0 l u x x t d x + ε 1 0 l ϕ x t d x = α u x | 0 l 0 + β ϕ | 0 l 0 + γ u x t | 0 l 0 + ε 1 ϕ t | 0 l 0 = 0 ,
where the last equality follows from the boundary conditions u x ( 0 , t ) = u x ( l , t ) = ϕ ( 0 , t ) = ϕ ( l , t ) = 0 . Consequently, by letting v ( t ) : = 0 l u ( x , t ) d x and bearing in mind the initial conditions u ( x , 0 ) = u 0 ( x ) , u t ( x , 0 ) = u 1 ( x ) , we obtain the following initial value problem
v ( t ) = 0 , t > 0 , v ( 0 ) = 0 l u 0 ( x ) d x , v ( 0 ) = 0 l u 1 ( x ) d x .
Solving the differential equation v ( t ) = 0 , we obtain
v ( t ) = b 1 t + b 2 ,
where b 1 and b 2 are some constants. Applying the initial condition v ( 0 ) = 0 l u 0 ( x ) d x , we obtain
0 l u 0 ( x ) d x = b 2 .
By differentiating (4) with respect to t and using the initial condition v ( 0 ) = 0 l u 1 ( x ) d x , we have
0 l u 1 ( x ) d x = b 1 .
By substituting b 1 and b 2 into (4), we obtain
v ( t ) = 0 l u ( x , t ) d x = t 0 l u 1 ( x ) d x + 0 l u 0 ( x ) d x .
Consequently, by setting
u ¯ ( x , t ) = u ( x , t ) t l 0 l u 1 ( x ) d x 1 l 0 l u 0 ( x ) d x
and using (5), we end up with
0 l u ¯ ( x , t ) d x = 0 , t > 0 .
Thus, Poincaré’s inequality can be administered on u ¯ . In addition, simple substitution shows that ( u ¯ , ϕ ) is the solution to problem (1) with initial data for u ¯ given as
u ¯ 0 ( x ) = u 0 ( x ) 1 l 0 l u 0 ( x ) d x and u ¯ 1 ( x ) = u 1 ( x ) 1 l 0 l u 1 ( x ) d x .
Henceforth, we work with ( u ¯ , ϕ ) instead of ( u , ϕ ) but write ( u , ϕ ) for simplicity.
The breakdown of the remaining sections is as follows: We devote Section 2 to the statements and proofs of some essential technical lemmas. Our stability result is established in Section 3. The paper ends with some general comments and interesting open problems in Section 4. We use c p throughout this paper to denote Poincaré’s constant.

2. Technical Lemmas

At the beginning of this section, let us indicate that the energy functional E associated with system (1) is given by
E ( t ) = 1 2 0 l ρ u t 2 + κ ϕ t 2 + δ ϕ x 2 + α u x 2 + η ϕ 2 + 2 β u x ϕ d x , t > 0 .
Remark 1.
Assumption α η > β 2 guarantees that the energy functional E , defined by (6), is nonnegative. To establish this, it is enough to show that the combination of the last three terms on the right side of (6) is nonnegative, that is
α u x 2 + η ϕ 2 + 2 β u x ϕ > 0 .
Clearly, we have
α u x 2 + η ϕ 2 + 2 β u x ϕ = α β 2 η u x 2 + η ϕ + β η u x 2 .
So, the energy functional E becomes
E ( t ) = 1 2 0 l ρ u t 2 + κ ϕ t 2 + δ ϕ x 2 + α β 2 η u x 2 + η ϕ + β η u x 2 d x , t > 0 .
Consequently, by using the fact that α η > β 2 , the nonnegativity is guaranteed.
The following lemmas are designed to capture some important functionals and the estimate of their derivatives.
Lemma 1.
Assume 4 γ τ > ε 1 + ε 2 2 . Then, the energy functional E associated with system (1) and given by (6), satisfies
d d t E ( t ) γ 0 0 l u x t 2 d x , t > 0 .
Proof. 
Multiplying the first equation in (1) by u t , integrating by parts over ( 0 , l ) , and taking advantage of the boundary conditions, we obtain, for any t > 0 ,
ρ 0 l u t t u t d x + α 0 l u x u x t d x + β 0 l ϕ u x t d x + γ 0 l u x t 2 d x + ε 1 0 l ϕ t u x t d x = 0 ρ 2 d d t 0 l u t 2 d x + α 2 d d t 0 l u x 2 d x + β d d t 0 l ϕ u x d x β 0 l ϕ t u x d x + γ 0 l u x t 2 d x +   ε 1 0 l ϕ t u x t d x = 0 .
The last equation can be written as:
ρ 2 d d t 0 l u t 2 d x   + α 2 d d t 0 l u x 2 d x + β d d t 0 l ϕ u x d x = β 0 l ϕ t u x d x γ 0 l u x t 2 d x ε 1 0 l ϕ t u x t d x .
Similarly, by multiplying the second equation in (1) by ϕ t , we obtain, for any t > 0 ,
κ 2 d d t 0 l ϕ t 2 d x + δ 2 d d t 0 l ϕ x 2 d x + η 2 d d t 0 l ϕ 2 d x = β 0 l ϕ t u x d x τ 0 l ϕ t 2 d x ε 2 0 l ϕ t u x t d x .
Summing up (10) and (11), we have, for any t > 0 ,
1 2 d d t 0 l [ ρ u t 2 + κ ϕ t 2 + δ ϕ x 2 +   α u x 2 + η ϕ 2 + 2 β u x ϕ ] d x = γ 0 l u x t 2 d x τ 0 l ϕ t 2 d x ( ε 1 + ε 2 ) 0 l u x t ϕ t d x .
Thus, bearing in mind (6), we obtain
d d t E ( t ) = γ 0 l u x t 2 d x τ 0 l ϕ t 2 d x ( ε 1 + ε 2 ) 0 l u x t ϕ t d x , t > 0 .
Using the fact that 4 γ τ > ε 1 + ε 2 2 , we have γ 0 : = γ ε 1 + ε 2 2 τ 2 > 0 . So, from (12), we have, for any t > 0 ,
d d t E ( t ) = γ ε 1 + ε 2 2 τ 2 0 l u x t 2 d x 0 l τ ϕ t + ε 1 + ε 2 2 τ u x t 2 d x = γ 0 0 l u x t 2 d x 0 l τ ϕ t + ε 1 + ε 2 2 τ u x t 2 d x γ 0 0 l u x t 2 d x 0 .
Remark 2.
The condition 4 γ τ > ε 1 + ε 2 2 guarantees the dissipative nature of the system. In other words, the energy E of the system is decreasing when 4 γ τ > ε 1 + ε 2 2 . See the proof of Lemma 1.
Lemma 2.
The functional Q 1 given by
Q 1 ( t ) : = α ε 1 0 l u x ϕ d x ε 1 ρ 0 l ϕ t 0 x u t ( s ) d s d x + β ε 1 2 0 l ϕ 2 d x + ρ β ε 1 2 κ 0 l u 2 d x , t > 0 ,
satisfies, for any δ 1 > 0 , the estimate
d d t Q 1 ( t ) ε 1 2 2 0 l ϕ t 2 d x + δ 1 0 l ϕ 2 d x + | ε 1 ε 2 | ρ c p κ + γ 2 + ε 1 2 2 δ 1 α ρ δ κ 2 + ε 1 2 ρ 2 η 2 l c p 2 δ 1 κ 2 + ρ 2 l c p κ 2 τ 2 0 l u x t 2 d x , t > 0 .
Proof. 
The direct derivative of Q 1 gives, for any t > 0 ,
d d t Q 1 ( t ) = α ε 1 0 l u x t ϕ d x + α ε 1 0 l u x ϕ t d x ε 1 ρ 0 l ϕ t t 0 x u t ( s ) d s d x ε 1 ρ 0 l ϕ t 0 x u t t ( s ) d s d x + β ε 1 0 l ϕ ϕ t d x + ρ β ε 1 κ 0 l u u t d x .
Using the second equation in (1), we see that the third term on the right-hand side of Equation (15) can be written as
ε 1 ρ 0 l ϕ t t 0 x u t ( s ) d s d x = ε 1 ρ κ 0 l δ ϕ x x + β u x + η ϕ + τ ϕ t + ε 2 u x t 0 x u t ( s ) d s d x .
Using integration by parts and the boundary conditions, we end up with
ε 1 ρ 0 l ϕ t t 0 x u t ( s ) d s d x = ρ δ ε 1 κ 0 l u x t ϕ d x ρ β ε 1 κ 0 l u u t d x ε 1 ε 2 ρ κ 0 l u t 2 d x +   ε 1 ρ η κ 0 l ϕ 0 x u t ( s ) d s d x + τ ε 1 ρ κ 0 l ϕ t 0 x u t ( s ) d s d x .
Similarly, using the first equation in (1), we obtain that the fourth term on the right-hand side of Equation (15) equals
ε 1 ρ 0 l ϕ t 0 x u t t ( s ) d s d x = α ε 1 0 l u x ϕ t d x β ε 1 0 l ϕ ϕ t d x ε 1 γ 0 l u x t ϕ t d x ε 1 2 0 l ϕ t 2 d x .
The combination of (15)–(17) gives, for any t > 0 ,
d d t Q 1 ( t ) = ε 1 2 0 l ϕ t 2 d x ε 1 ε 2 ρ κ 0 l u t 2 d x f 1 ε 1 γ 0 l u x t ϕ t d x f 2 + ε 1 ρ τ κ 0 l ϕ t 0 x u t ( s ) d s d x f 3 + ε 1 α ρ δ κ 0 l u x t ϕ d x f 4 + ε 1 ρ η κ 0 l ϕ 0 x u t ( s ) d s d x f 5 .
The estimation of f i , i = 1 5 , using Young’s, Cauchy-Schwarz, and Poincaré’s inequalities gives, for any t > 0 ,
f 1 ( t ) | ε 1 ε 2 | ρ c p κ 0 l u x t 2 d x f 2 ( t ) ε 1 2 4 0 l ϕ t 2 d x + γ 2 0 l u x t 2 d x f 3 ( t ) ε 1 2 4 0 l ϕ t 2 d x + ρ 2 κ 2 τ 2 0 l 0 x u t ( s ) d s 2 d x ε 1 2 4 0 l ϕ t 2 d x + ρ 2 l κ 2 τ 2 0 l u t 2 d x ε 1 2 4 0 l ϕ t 2 d x + ρ 2 l c p κ 2 τ 2 0 l u x t 2 d x f 4 ( t ) δ 1 2 0 l ϕ 2 d x + ε 1 2 2 δ 1 α ρ δ κ 2 0 l u x t 2 d x f 5 ( t ) δ 1 2 0 l ϕ 2 d x + ε 1 2 ρ 2 η 2 l c p 2 δ 1 κ 2 0 l u x t 2 d x .
Replacing f i , i = 1 5 , in (18) with their respective estimates yields (14). □
Lemma 3.
Suppose that α η > β 2 . The functional Q 2 given by
Q 2 ( t ) : = κ 0 l ϕ t ϕ d x + β ρ α 0 l ϕ 0 x u t ( s ) d s d x + 1 2 τ β ε 1 α 0 l ϕ 2 d x , t > 0 ,
can be estimated, for some positive constant η 0 , by the the following expression:
d d t Q 2 ( t ) δ 0 l ϕ x 2 d x η 0 2 0 l ϕ 2 d x + κ + β 2 ρ 2 α 0 l ϕ t 2 d x + 1 2 η 0 β γ α ε 2 2 + ρ c p 2 α 0 l u t x 2 d x , t > 0 .
Proof. 
Multiplying the second equation in (1) by ϕ , then integrating it by parts over ( 0 , l ) , and taking into account the boundary conditions ϕ ( 0 , t ) = ϕ ( l , t ) = 0 , we obtain, for any t > 0 ,
κ d d t 0 l ϕ t ϕ d x κ 0 l ϕ t 2 d x + δ 0 l ϕ x 2 d x + β 0 l u x ϕ d x + η 0 l ϕ 2 d x + τ 2 d d t 0 l ϕ 2 d x + ε 2 0 l u x t ϕ d x = 0 ,
which implies
κ d d t 0 l ϕ t ϕ d x + τ 2 d d t 0 l ϕ 2 d x = δ 0 l ϕ x 2 d x η 0 l ϕ 2 d x + κ 0 l ϕ t 2 d x β 0 l u x ϕ d x ε 2 0 l u x t ϕ d x .
Integrating the first equation in (1) over ( 0 , x ) and using the boundary conditions u x ( 0 , t ) = ϕ ( 0 , t ) = 0 , we obtain, for any t > 0 ,
ρ 0 x u t t ( s ) d s α u x β ϕ γ u x t ε 1 ϕ t = 0 .
Multiplying (21) by ϕ and integrating over ( 0 , l ) , we obtain, for any t > 0 ,
ρ d d t 0 l ϕ 0 x u t ( s ) d s d x ρ 0 l ϕ t 0 x u t ( s ) d s d x α 0 l u x ϕ d x β 0 l ϕ 2 d x γ 0 l u x t ϕ d x ε 1 2 d d t 0 l ϕ 2 d x = 0 .
Multiplying (22) by β α , we end up with
β ρ α d d t 0 l ϕ 0 x u t ( s ) d s d x β ε 1 2 α d d t 0 l ϕ 2 d x = β ρ α 0 l ϕ t 0 x u t ( s ) d s d x + β 0 l u x ϕ d x + β 2 α 0 l ϕ 2 d x + β γ α 0 l u x t ϕ d x .
The addition of (20) and (23) gives, for any t > 0 ,
d d t κ 0 l ϕ t ϕ d x + β ρ α 0 l ϕ 0 x u t ( s ) d s d x + 1 2 τ β ε 1 α 0 l ϕ 2 d x = Q 2 ( t ) = δ 0 l ϕ x 2 d x η β 2 α 0 l ϕ 2 d x + κ 0 l ϕ t 2 d x + β γ α ε 2 0 l u x t ϕ d x f 6 + β ρ α 0 l ϕ t 0 x u t ( s ) d s d x f 7 .
Using the fact that α η > β 2 , we have η 0 = η β 2 α > 0 . Therefore, proceeding similarly as in the proof of Lemma 2, while estimating the functions f 2 and f 3 , we obtain, for any t > 0 ,
f 6 ( t ) η 0 2 0 l ϕ 2 d x + 1 2 η 0 β γ α ε 2 2 0 l u x t 2 d x f 7 ( t ) β 2 ρ 2 α 0 l ϕ t 2 d x + ρ c p 2 α 0 l u x t 2 d x .
By replacing f 6 and f 7 in (24) with the above estimates, we obtain (19). □
Lemma 4.
The functional Q 3 given by
Q 3 ( t ) : = ρ 0 l u t u d x + γ 2 0 l u x 2 d x + ε 1 0 l u x ϕ d x , t > 0 ,
satisfies
d d t Q 3 ( t ) α 2 0 l u x 2 d x + ρ c p + ε 1 2 0 l u x t 2 d x + β 2 2 α + ε 1 2 0 l ϕ 2 d x , t > 0 .
Proof. 
Multiplying the first equation in (1) by u, we have
ρ u t t u α u x x u β ϕ x u γ u x x t u ε 1 ϕ x t u = 0 , t > 0 .
Now, integrating by parts over ( 0 , l ) and using the boundary conditions u x ( 0 , t ) = u x ( l , t ) = ϕ ( 0 , t ) = ϕ ( l , t ) = 0 , we obtain, for any t > 0 ,
ρ 0 l u t t u d x + α 0 l u x 2 d x + β 0 l ϕ u x d x + γ 0 l u x u x t d x + ε 1 0 l u x ϕ t d x = 0 ρ d d t 0 l u t u d x ρ 0 l u t 2 d x + α 0 l u x 2 d x + β 0 l ϕ u x d x + γ 2 d d t 0 l u x 2 d x + ε 1 d d t 0 l u x ϕ d x ε 1 0 l u x t ϕ d x = 0 ,
which implies
d d t ρ 0 l u t u d x + γ 2 0 l u x 2 d x + ε 1 0 l u x ϕ d x Q 3 ( t ) = α 0 l u x 2 d x + ρ 0 l u t 2 d x β 0 l u x ϕ d x f 8 + ε 1 0 l u x t ϕ d x f 9 .
Using Young’s inequality, we have, for any t > 0 ,
f 8 ( t ) α 2 0 l u x 2 d x + β 2 2 α 0 l ϕ 2 d x f 9 ( t ) ε 1 2 0 l u x t 2 d x + ε 1 2 0 l ϕ 2 d x .
Using the above estimates as well as Poincaré’s inequality, we establish (25), and so the proof is complete. □

3. Exponential Stability

The following is our exponential stability result.
Theorem 1.
Suppose that 4 γ τ > ε 1 + ε 2 2 and α η > β 2 . Then, the energy E ( t ) of the system (1) decays exponentially. In other words, there exist two positive constants k 0 and k 1 such that the energy functional given by (6) satisfies
E ( t ) k 0 exp ( k 1 t ) , t > 0 .
Proof. 
We define a Lyapunov functional (which is a linear combination of the functionals defined in the previous section)
L ( t ) : = N E ( t ) + i = 1 3 N i Q i ( t ) , t > 0 ,
where N and N i , i = 1 3 , are positive constants to be appropriately chosen later on in the proof. By differentiating (28) and using (9), (14), (19) and (25), we have, for any t > 0 ,
d d t L ( t ) δ N 2 0 l ϕ x 2 d x α 2 N 3 0 l u x 2 d x ε 1 2 2 N 1 κ + β 2 ρ 2 α N 2 0 l ϕ t 2 d x η 0 2 N 2 δ 1 N 1 β 2 2 α + ε 1 2 N 3 0 l ϕ 2 d x [ γ 0 N 1 2 η 0 β γ α ε 2 2 + ρ c p 2 α N 2 ρ c p + ε 1 2 N 3 γ 2 + | ε 1 ε 2 | ρ c p κ + ε 1 2 2 δ 1 α ρ δ κ 2 + ε 1 2 ρ 2 η 2 l c p 2 δ 1 κ 2 + ρ 2 l c p κ 2 τ 2 N 1 ] 0 l u x t 2 d x .
We let N 3 = 1 , and take N 2 large enough so that
c 0 : = η 0 2 N 2 β 2 2 α + ε 1 2 N 3 > 0 .
Next, we choose N 1 large enough so that
c 1 : = ε 1 2 2 N 1 κ + β 2 ρ 2 α N 2 > 0
and, then, let
δ 1 = c 0 2 N 1 .
Thus, we have, for any t > 0 ,
d d t L ( t ) c 2 0 l ϕ x 2 d x c 3 0 l u x 2 d x c 1 0 l ϕ t 2 d x c 0 2 0 l ϕ 2 d x γ 0 N c 4 0 l u x t 2 d x ,
where
c 2 : = δ N 2 > 0 , c 3 : = α 2 N 3 > 0 , c 4 : = 1 2 η 0 β γ α ε 2 2 + ρ c p 2 α N 2 + ρ c p + ε 1 2 N 3 + γ 2 + | ε 1 ε 2 | ρ c p κ + ε 1 2 2 δ 1 α ρ δ κ 2 + ε 1 2 ρ 2 η 2 l c p 2 δ 1 κ 2 + ρ 2 l c p κ 2 τ 2 N 1 > 0 .
On the other hand, from (28), we have, for any t > 0 ,
| L ( t ) N E ( t ) | N 1 | α ε 1 0 l u x ϕ d x ρ ε 1 0 l ϕ t 0 x u t ( s ) d s d x + β ε 1 2 0 l ϕ 2 d x + ρ β ε 1 2 κ 0 l u 2 d x | + N 3 | ρ 0 l u t u d x + γ 2 0 l u x 2 d x + ε 1 0 l u x ϕ d x | + N 2 | κ 0 l ϕ t ϕ d x + β ρ α 0 l ϕ 0 x u t ( s ) d s d x + 1 2 τ β ε 1 α 0 l ϕ 2 d x | .
Using Young’s, Cauchy-Schwarz, and Poincaré’s inequalities, we obtain, for any t > 0 ,
| L ( t ) N E ( t ) | α | ε 1 | 2 N 1 + ρ | β ε 1 | c p 2 κ N 1 + ρ c p 2 N 3 + γ 2 N 3 + | ε 1 | 2 N 3 0 l u x 2 d x + α | ε 1 | 2 N 1 + | β ε 1 | 2 N 1 + | ε 1 | 2 N 3 + κ 2 N 2 + | β | ρ 2 α N 2 + 1 2 τ β ε 1 α c p 0 l ϕ x 2 d x + ρ | ε 1 | 2 N 1 + κ 2 N 2 0 l ϕ t 2 d x + ρ | ε 1 | 2 N 1 + ρ 2 N 3 + | β | ρ 2 α N 2 0 l u t 2 d x k 0 l u x 2 + ϕ x 2 + ϕ t 2 + u t 2 d x ,
where the constant k > 0 can be taken as
k = α | ε 1 | 2 N 1 + ρ | β ε 1 | c p 2 κ N 1 + ρ c p 2 N 3 + γ 2 N 3 + | ε 1 | 2 N 3 + α | ε 1 | c p 2 N 1 + | β ε 1 | c p 2 N 1 + | ε 1 | c p 2 N 3 + κ c p 2 N 2 + | β | ρ c p 2 α N 2 + c p 2 τ β ε 1 α + ρ | ε 1 | 2 N 1 + κ 2 N 2 + ρ | ε 1 | 2 N 1 + ρ 2 N 3 + | β | ρ 2 α N 2 .
Using (8), it is obvious that
0 l u t 2 d x 2 ρ E ( t ) , 0 l ϕ x 2 d x 2 δ E ( t ) , 0 l ϕ t 2 d x 2 κ E ( t ) , 0 l u x 2 d x 2 α β 2 η E ( t ) .
Consequently, we have, for any t > 0 ,
| L ( t ) N E ( t ) | a 0 E ( t ) , a 0 > 0 ,
which implies
N a 0 E ( t ) L ( t ) N + a 0 E ( t ) , t > 0 .
Finally, we choose N large enough so that
c 5 : = γ 0 N c 4 > 0 and c 6 : = N a 0 > 0 .
Thus, for some positive constants σ 1 and σ 2 , the following equivalence relation holds
σ 1 E ( t ) L ( t ) σ 2 E ( t ) , t > 0 .
Moreover, referring to (30), we obtain, for any t > 0 ,
d d t L ( t ) c 2 0 l ϕ x 2 d x c 3 0 l u x 2 d x c 1 0 l ϕ t 2 d x c 0 2 0 l ϕ 2 d x c 5 0 l u x t 2 d x .
Using Poincaré’s inequality, we have
c 5 0 l u x t 2 d x c 5 c p 0 l u t 2 d x .
Accordingly, we end up with
d d t L ( t ) ν 0 l u t 2 + u x 2 + ϕ t 2 + ϕ x 2 + ϕ 2 d x , t > 0 ,
for some positive constant ν . Meanwhile, by considering (6) and using Young’s inequality, we obtain
E ( t ) 1 2 0 l ρ u t 2 + α + β 2 2 u x 2 + κ ϕ t 2 + δ ϕ x 2 + η + 1 2 ϕ 2 d x , t > 0 .
Letting c 7 : = ρ + α + β 2 2 + κ + δ + η + 1 2 > 0 , we have
E ( t ) c 7 0 l u t 2 + u x 2 + ϕ t 2 + ϕ x 2 + ϕ 2 d x , t > 0 .
Consequently, from (34) and (35), we have, for some a 1 > 0
d d t L ( t ) a 1 E ( t ) , t > 0 .
Using the equivalence relation (32), we obtain
d d t L ( t ) k 1 L ( t ) , t > 0 .
Simple integration of (36), as well as the application of (32), yields the desired exponential stability result (27). □
Remark 3.
If the condition 4 γ τ > ε 1 + ε 2 2 is replaced with 2 γ τ ε 1 + ε 2 2 , then the energy functional E statisfies
d d t E ( t ) γ 0 0 l u x t 2 d x , t > 0 .
Consequently, the exponential stability result (27) also holds when 2 γ τ = ε 1 + ε 2 2 .

4. General Comments and Open Problems

This last section gives some comments and highlights some open problems. The result in this paper completes the result obtained by Quintanilla and Ueda [3] for unbounded domains. Our exponential decay result also holds when 2 γ τ = ε 1 + ε 2 2 ; however, we do not know whether or not it is valid for the case of 4 γ τ = ε 1 + ε 2 2 . Júnior et al. [2] established an optimal polynomial stability result for the case ε 1 = ε 2 , which is equivalent to the result obtained by Quintanilla and Ueda [3] for the same case but unbounded domains. An interesting open problem is establishing an optimal polynomial stability result for the general case 4 γ τ = ε 1 + ε 2 2 . More importantly, it is interesting to investigate the system for multidimensional cases, perhaps with nonlinear terms corresponding to the Navier–Stokes equations. Some numerical analysis could also be carried out to illustrate some of the results. Other open problems include:
(a)
The case when γ = 0 , τ > 0 is an interesting problem to investigate. It would not be easy to obtain an exponential stability result; perhaps setting ε 1 = ε 2 might help. This is the same for the case γ > 0 , τ = 0 .
(b)
The case when the term τ ϕ t is nonlinear, that is, τ g ( ϕ t ) , is also an interesting problem to consider.
(c)
Another interesting problem is to consider the more general system proposed by Munoz et al. [1]
ρ u t t α u x x β ϕ x γ u x x t ε 1 ϕ x t d 1 ϕ x x b 1 ϕ x x t = 0 , κ ϕ t t δ ϕ x x + β u x + η ϕ + τ ϕ t + ε 2 u x t d 1 u x x k ϕ x x t b 2 u x x t μ ϕ x t = 0 , u ( x , 0 ) = u 0 ( x ) , u t ( x , 0 ) = u 1 ( x ) , ϕ ( x , 0 ) = ϕ 0 ( x ) , ϕ t ( x , 0 ) = ϕ 1 ( x ) , u ( 0 , t ) = u ( l , t ) = ϕ ( 0 , t ) = ϕ ( l , t ) = 0 .
The necessary assumption to guarantee the positivity of the internal energy of system (37) is
α > β 2 η + d 1 2 δ .
In addition, the following assumption
4 γ > ( ε 1 + ε 2 ) 2 τ + ( b 1 + b 2 ) 2 k
assures the dissipation of the energy. The inequality 2 γ ( ε 1 + ε 2 ) 2 τ + ( b 1 + b 2 ) 2 k could also be considered instead of (39), see Remark 3.

Author Contributions

All authors contributed equally. All authors have read and agreed to the published version of the manuscript.

Funding

The Deanship of Scientific Research, University of Hafr Al-Batin (UHB), funds this research under project No: 0046-1443-S.

Institutional Review Board Statement

Not applicable.

Informed Consent Statement

Not applicable.

Data Availability Statement

Not applicable.

Acknowledgments

The first author extends their appreciation to the Deanship of Scientific Research, University of Hafr Al-Batin (UHB), for funding this work through the research group project No: 0046-1443-S. The authors thank the reviewers for their insightful comments, which significantly improved the work.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Muñoz, J.E.; Pamplona, P.X.; Quintanilla, R. On decay and analyticity in viscoelastic solids with voids by means of dissipative coupling. Math. Mech. Solids 2013, 18, 837–848. [Google Scholar] [CrossRef]
  2. Júnior, D.A.; Ramos, A.J.A.; Freitas, M.M.; Santos, M.J.D.; Arwadi, T.E. Polynomial stability for the equations of porous elasticity in one-dimensional bounded domains. Math. Mech. Solids 2021, 27, 10812865211019074. [Google Scholar] [CrossRef]
  3. Quintanilla, R.; Ueda, Y. Decay structures for the equations of porous elasticity in one-dimensional whole space. J. Dyn. Differ. Equ. 2020, 32, 1669–1685. [Google Scholar] [CrossRef]
  4. Quintanilla, R. Slow decay for one-dimensional porous dissipation elasticity. Appl. Math. Lett. 2003, 16, 487–491. [Google Scholar] [CrossRef] [Green Version]
  5. Apalara, T.A. Exponential decay in one-dimensional porous dissipation elasticity. Q. J. Mech. Math. 2017, 70, 363–372, Erratum in Q. J. Mech. Math. 2017, 70, 553–555. [Google Scholar] [CrossRef]
  6. Magańa, A.; Quintanilla, R. On the time decay of solutions in one-dimensional theories of porous materials. Int. J. Solids Struct. 2006, 43, 3414–3427. [Google Scholar] [CrossRef] [Green Version]
  7. Ramos, A.J.A.; Júnior, D.A.; Freitas, M.M.; Dos Santos, M.J. A new exponential decay result for one-dimensional porous dissipation elasticity from second spectrum viewpoint. Appl. Math. Lett. 2020, 101, 106061. [Google Scholar] [CrossRef]
  8. Miranville, A.; Quintanilla, R. Exponential decay in one-dimensional type III thermoelasticity with voids. Appl. Math. Lett. 2019, 94, 30–37. [Google Scholar] [CrossRef]
  9. Apalara, T.A. A general decay for a weakly nonlinearly damped porous system. J. Dyn. Control Syst. 2019, 25, 311–322. [Google Scholar] [CrossRef]
  10. Apalara, T.A. General decay of solutions in one-dimensional porous-elastic system with memory. J. Math. Anal. Appl. 2019, 469, 457–471. [Google Scholar] [CrossRef]
  11. Feng, B.; Apalara, T.A. Optimal decay for a porous elasticity system with memory. J. Math. Anal. Appl. 2019, 470, 1108–1128. [Google Scholar] [CrossRef]
  12. Santos, M.L.; Jùnior, D.A. On porous-elastic system with localized damping. Z. Angew. Math. Phys. 2016, 67, 1–18. [Google Scholar] [CrossRef]
  13. Messaoudi, S.A.; Fareh, A. Exponential decay for linear damped porous thermoelastic systems with second sound. Discret. Contin. Dyn. Syst.-B 2015, 20, 599. [Google Scholar] [CrossRef]
  14. Pamplona, P.X.; Munoz, J.E.; Quintanilla, R. On the decay of solutions for porous-elastic systems with history. J. Math. Anal. Appl. 2011, 379, 682–705. [Google Scholar] [CrossRef]
  15. Muñoz, J.E.; Quintanilla, R. On the time polynomial decay in elastic solids with voids. J. Math. Anal. Appl. 2008, 338, 1296–1309. [Google Scholar] [CrossRef] [Green Version]
  16. Soufyane, A. Energy decay for Porous-thermo-elasticity systems of memory type. Appl. Anal. 2008, 87, 451–464. [Google Scholar] [CrossRef]
  17. Pamplona, P.X.; Rivera, J.E.M.; Quintanilla, R. Analyticity in porous-thermoelasticity with microtemperatures. J. Math. Anal. Appl. 2012, 394, 645–655. [Google Scholar] [CrossRef]
  18. Casas, P.S.; Quintanilla, R. Exponential decay in one-dimensional porous-thermo-elasticity. Mech. Res. Commun. 2005, 32, 652–658. [Google Scholar] [CrossRef] [Green Version]
  19. Casas, P.S.; Quintanilla, R. Exponential stability in thermoelasticity with microtemperatures. Int. J. Eng. Sci. 2005, 43, 33–47. [Google Scholar] [CrossRef] [Green Version]
  20. Santos, M.L.; Campelo, A.D.S.; Oliveira, M.L.S. On porous-elastic systems with Fourier law. Appl. Anal. 2019, 98, 1181–1197. [Google Scholar] [CrossRef]
  21. Pamplona, P.X.; Rivera, J.E.M.; Quintanilla, R. Stabilization in elastic solids with voids. J. Math. Anal. Appl. 2009, 350, 37–49. [Google Scholar] [CrossRef] [Green Version]
  22. Apalara, T.A. On the stability of porous-elastic system with microtemparatures. J. Therm. Stress. 2019, 42, 265–278. [Google Scholar] [CrossRef]
  23. Zhu, Q.; Huang, T. Stability analysis for a class of stochastic delay nonlinear systems driven by G-Brownian motion. Syst. Control Lett. 2020, 140, 104699. [Google Scholar] [CrossRef]
  24. Zhu, Q. Stabilization of stochastic nonlinear delay systems with exogenous disturbances and the event-triggered feedback control. IEEE Trans. Autom. Control 2018, 64, 3764–3771. [Google Scholar] [CrossRef]
  25. Djellali, F.; Labidi, S.; Taallah, F. General decay of porous elastic system with thermo-viscoelastic damping. Eurasian J. Math. Comput. Appl. 2022, 9, 31–43. [Google Scholar] [CrossRef]
  26. Ferreira, J.A.; Pinto, L.; Santos, R.F. Numerical analysis of a porous–elastic model for convection enhanced drug delivery. J Comput. Appl. Math. 2022, 399, 113719. [Google Scholar] [CrossRef]
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Share and Cite

MDPI and ACS Style

Apalara, T.A.; Ige, A.O. Exponential Stability for the Equations of Porous Elasticity in One-Dimensional Bounded Domains. Mathematics 2022, 10, 1597. https://doi.org/10.3390/math10091597

AMA Style

Apalara TA, Ige AO. Exponential Stability for the Equations of Porous Elasticity in One-Dimensional Bounded Domains. Mathematics. 2022; 10(9):1597. https://doi.org/10.3390/math10091597

Chicago/Turabian Style

Apalara, Tijani A., and Aminat O. Ige. 2022. "Exponential Stability for the Equations of Porous Elasticity in One-Dimensional Bounded Domains" Mathematics 10, no. 9: 1597. https://doi.org/10.3390/math10091597

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop