Next Article in Journal
Improvement of Radio Frequency Identification Security Using New Hybrid Advanced Encryption Standard Substitution Box by Chaotic Maps
Next Article in Special Issue
Metasurfaces for Reconfiguration of Multi-Polarization Antennas and Van Atta Reflector Arrays
Previous Article in Journal
Two-Stage Checkpoint Based Security Monitoring and Fault Recovery Architecture for Embedded Processor
Previous Article in Special Issue
Characterization of Novel Structures Consisting of Micron-Sized Conductive Particles That Respond to Static Magnetic Field Lines for 4G/5G (Sub-6 GHz) Reconfigurable Antennas
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

A Reconfigurable Polarization—Frequency Supershape Patch Antenna with Enhanced Bandwidth

by
Anastasios Koutinos
,
Georgia Xanthopoulou
,
George Kyriacou
and
Michael Chryssomallis
*
Democritus University of Thrace, Electrical & Computer Engineering Department, 67100 Xanthi, Greece
*
Author to whom correspondence should be addressed.
Electronics 2020, 9(7), 1166; https://doi.org/10.3390/electronics9071166
Submission received: 1 May 2020 / Revised: 13 July 2020 / Accepted: 15 July 2020 / Published: 18 July 2020
(This article belongs to the Special Issue Reconfigurable Antennas)

Abstract

In this article a reconfigurable antenna for WLAN/WiMAX applications is presented. A super-shape radiator of an ellipsis shape is used to achieve wider intrinsic bandwidth compared to the classical rectangular patch antenna, while the dimensions remain comparable. The proposed antenna is fed at two points exciting both horizontal and vertical polarization but in different operating frequencies. To achieve wider bandwidth, as a whole but also for each polarization, the symmetrical feeding points for each excitation are also employed with a proper feeding network. PIN diodes are also used in the feeding network to provide the option of narrower bandwidth. The antenna substrate is Rogers RO4003C with dielectric constant εr = 3.55 and dissipation losses tanδ = 0.0027 with height h = 1.524 mm. The antenna operates in the range of 2.3 GHz to 2.55 GHz but, using the proposed procedure, it can be designed for different frequency ranges.
Keywords: wideband reconfigurable antennas; new feeding techniques; dual polarization; multifrequency antennas; supershape wideband reconfigurable antennas; new feeding techniques; dual polarization; multifrequency antennas; supershape

Share and Cite

MDPI and ACS Style

Koutinos, A.; Xanthopoulou, G.; Kyriacou, G.; Chryssomallis, M. A Reconfigurable Polarization—Frequency Supershape Patch Antenna with Enhanced Bandwidth. Electronics 2020, 9, 1166. https://doi.org/10.3390/electronics9071166

AMA Style

Koutinos A, Xanthopoulou G, Kyriacou G, Chryssomallis M. A Reconfigurable Polarization—Frequency Supershape Patch Antenna with Enhanced Bandwidth. Electronics. 2020; 9(7):1166. https://doi.org/10.3390/electronics9071166

Chicago/Turabian Style

Koutinos, Anastasios, Georgia Xanthopoulou, George Kyriacou, and Michael Chryssomallis. 2020. "A Reconfigurable Polarization—Frequency Supershape Patch Antenna with Enhanced Bandwidth" Electronics 9, no. 7: 1166. https://doi.org/10.3390/electronics9071166

APA Style

Koutinos, A., Xanthopoulou, G., Kyriacou, G., & Chryssomallis, M. (2020). A Reconfigurable Polarization—Frequency Supershape Patch Antenna with Enhanced Bandwidth. Electronics, 9(7), 1166. https://doi.org/10.3390/electronics9071166

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop