Next Article in Journal
Surface/Interface Engineering for Constructing Advanced Nanostructured Photodetectors with Improved Performance: A Brief Review
Next Article in Special Issue
Green and Sustainable Manufacture of Ultrapure Engineered Nanomaterials
Previous Article in Journal
Extracellular Synthesis and Characterization of Silver Nanoparticles—Antibacterial Activity against Multidrug-Resistant Bacterial Strains
Previous Article in Special Issue
The Effect of the Antioxidant Activity of Plant Extracts on the Properties of Gold Nanoparticles
Article

Laser Fragmentation Synthesis of Colloidal Bismuth Ferrite Particles

1
Technical Chemistry I and Center for Nanointegration Duisburg-Essen (CENIDE), University of Duisburg-Essen, Universitaetsstr. 7, 45141 Essen, Germany
2
Institute for Materials Science and Center for Nanointegration Duisburg-Essen (CENIDE), University of Duisburg-Essen, 45141 Essen, Germany
*
Author to whom correspondence should be addressed.
Nanomaterials 2020, 10(2), 359; https://doi.org/10.3390/nano10020359
Received: 8 January 2020 / Revised: 7 February 2020 / Accepted: 13 February 2020 / Published: 19 February 2020
Laser fragmentation of colloidal submicron-sized bismuth ferrite particles was performed by irradiating a liquid jet to synthesize bismuth ferrite nanoparticles. This treatment achieved a size reduction from 450 nm to below 10 nm. A circular and an elliptical fluid jet were compared to control the energy distribution within the fluid jet and thereby the product size distribution and educt decomposition. The resulting colloids were analysed via UV-VIS, XRD and TEM. All methods were used to gain information on size distribution, material morphology and composition. It was found that using an elliptical liquid jet during the laser fragmentation leads to a slightly smaller and narrower size distribution of the resulting product compared to the circular jet. View Full-Text
Keywords: nanoparticles; size reduction; picosecond; ray tracing; multiferroic nanoparticles; size reduction; picosecond; ray tracing; multiferroic
Show Figures

Figure 1

MDPI and ACS Style

Siebeneicher, S.; Waag, F.; Escobar Castillo, M.; Shvartsman, V.V.; Lupascu, D.C.; Gökce, B. Laser Fragmentation Synthesis of Colloidal Bismuth Ferrite Particles. Nanomaterials 2020, 10, 359. https://doi.org/10.3390/nano10020359

AMA Style

Siebeneicher S, Waag F, Escobar Castillo M, Shvartsman VV, Lupascu DC, Gökce B. Laser Fragmentation Synthesis of Colloidal Bismuth Ferrite Particles. Nanomaterials. 2020; 10(2):359. https://doi.org/10.3390/nano10020359

Chicago/Turabian Style

Siebeneicher, Simon, Friedrich Waag, Marianela Escobar Castillo, Vladimir V. Shvartsman, Doru C. Lupascu, and Bilal Gökce. 2020. "Laser Fragmentation Synthesis of Colloidal Bismuth Ferrite Particles" Nanomaterials 10, no. 2: 359. https://doi.org/10.3390/nano10020359

Find Other Styles
Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.

Article Access Map by Country/Region

1
Back to TopTop