Next Article in Journal
Research on the Visual SLAM Algorithm for Unmanned Surface Vehicles in Nearshore Dynamic Scenarios
Previous Article in Journal
Interfacial Failure in Flexible Pipe End Fittings: DIC and Cohesive Zone Modeling for Defect Analysis
Previous Article in Special Issue
Investigation on the Welding Residual Stress Distribution in Multi-Segment Conical Egg-Shaped Shell
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
JMSE
Volume 13
Issue 4
10.3390/jmse13040678
jmse-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles
Correction to J. Mar. Sci. Eng. 2025, 13(3), 578.
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Correction

Correction: Zhu et al. Investigation on the Welding Residual Stress Distribution in Multi-Segment Conical Egg-Shaped Shell. J. Mar. Sci. Eng. 2025, 13, 578

by
Yongmei Zhu
1,*,
Ao Sun
1,
Longbo Zhou
1,
Lihui Wang
1,* and
Xilu Zhao
2
1
School of Mechanical Engineering, Jiangsu University of Science and Technology, Zhenjiang 212003, China
2
College of Mechanical Engineering, Saitama Institute of Technology, Saitama 369-0293, Japan
*
Authors to whom correspondence should be addressed.
J. Mar. Sci. Eng. 2025, 13(4), 678; https://doi.org/10.3390/jmse13040678
Submission received: 21 March 2025 / Accepted: 24 March 2025 / Published: 27 March 2025
(This article belongs to the Special Issue Advancements in Deep-Sea Equipment and Technology, 3rd Edition)
Versions Notes

Update the Order of Existing Authors

In the original publication, there was an error in the order of author names as published [1]. Author Ao Sun should be before author Long Zhou. The authors state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.

Reference

  1. Zhu, Y.; Sun, A.; Zhou, L.; Wang, L.; Zhao, X. Investigation on the Welding Residual Stress Distribution in Multi-Segment Conical Egg-Shaped Shell. J. Mar. Sci. Eng. 2025, 13, 578. [Google Scholar] [CrossRef]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Zhu, Y.; Sun, A.; Zhou, L.; Wang, L.; Zhao, X. Correction: Zhu et al. Investigation on the Welding Residual Stress Distribution in Multi-Segment Conical Egg-Shaped Shell. J. Mar. Sci. Eng. 2025, 13, 578. J. Mar. Sci. Eng. 2025, 13, 678. https://doi.org/10.3390/jmse13040678

AMA Style

Zhu Y, Sun A, Zhou L, Wang L, Zhao X. Correction: Zhu et al. Investigation on the Welding Residual Stress Distribution in Multi-Segment Conical Egg-Shaped Shell. J. Mar. Sci. Eng. 2025, 13, 578. Journal of Marine Science and Engineering. 2025; 13(4):678. https://doi.org/10.3390/jmse13040678

Chicago/Turabian Style

Zhu, Yongmei, Ao Sun, Longbo Zhou, Lihui Wang, and Xilu Zhao. 2025. "Correction: Zhu et al. Investigation on the Welding Residual Stress Distribution in Multi-Segment Conical Egg-Shaped Shell. J. Mar. Sci. Eng. 2025, 13, 578" Journal of Marine Science and Engineering 13, no. 4: 678. https://doi.org/10.3390/jmse13040678

APA Style

Zhu, Y., Sun, A., Zhou, L., Wang, L., & Zhao, X. (2025). Correction: Zhu et al. Investigation on the Welding Residual Stress Distribution in Multi-Segment Conical Egg-Shaped Shell. J. Mar. Sci. Eng. 2025, 13, 578. Journal of Marine Science and Engineering, 13(4), 678. https://doi.org/10.3390/jmse13040678

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop