Next Article in Journal
Indium Tin Oxide Nanoparticle: TiO2: Air Layers for One-Dimensional Multilayer Photonic Structures
Previous Article in Journal
Developing a Library of Shear Walls Database and the Neural Network Based Predictive Meta-Model
Previous Article in Special Issue
A Thermomechanical Analysis of Conformal Cooling Channels in 3D Printed Plastic Injection Molds
Open AccessEditorial

Special Issue: 3D Printing of Metals

Department of Mechanical Engineering, National University of Singapore, 9 Engineering Drive 1, Singapore 117576, Singapore
Appl. Sci. 2019, 9(12), 2563;
Received: 6 June 2019 / Accepted: 11 June 2019 / Published: 24 June 2019
(This article belongs to the Special Issue 3D Printing of Metals)
Note: In lieu of an abstract, this is an excerpt from the first page.

Additive manufacturing (AM) has emerged as one of the most enabling new manufacturing technique; the topic has been extensively researched worldwide for almost two decades [...] View Full-Text
MDPI and ACS Style

Gupta, M. Special Issue: 3D Printing of Metals. Appl. Sci. 2019, 9, 2563.

Show more citation formats Show less citations formats
Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.

Article Access Map by Country/Region

Search more from Scilit
Back to TopTop