Next Article in Journal
Enhanced Mechanical Properties and Surface Finish of PLA 3D Prints via Combined Heat Annealing and Powder Coating
Previous Article in Journal
An Ease-Off Based Tooth Contact Analysis Method for Measured Face Gear Flanks
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Correction

Correction: Cascio et al. An Automatic HEp-2 Specimen Analysis System Based on an Active Contours Model and an SVM Classification. Appl. Sci. 2019, 9, 307

Department of Physics and Chemistry, University of Palermo, 90128 Palermo, Italy
*
Author to whom correspondence should be addressed.
Appl. Sci. 2025, 15(17), 9337; https://doi.org/10.3390/app15179337
Submission received: 14 July 2025 / Accepted: 23 July 2025 / Published: 26 August 2025
There was an error in the original publication [1]. Citation [33] was inadvertently included in the text, but as it is not pertinent to the content, it has been removed. With this correction, the order of some references has been adjusted accordingly.
A correction has been made to Section 2.4.2, Paragraph 2: For this reason, many methods have been developed for the identification of elliptical objects in images [33,34].
The authors state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.

Reference

  1. Cascio, D.; Taormina, V.; Raso, G. An Automatic HEp-2 Specimen Analysis System Based on an Active Contours Model and an SVM Classification. Appl. Sci. 2019, 9, 307. [Google Scholar] [CrossRef]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Cascio, D.; Taormina, V.; Raso, G. Correction: Cascio et al. An Automatic HEp-2 Specimen Analysis System Based on an Active Contours Model and an SVM Classification. Appl. Sci. 2019, 9, 307. Appl. Sci. 2025, 15, 9337. https://doi.org/10.3390/app15179337

AMA Style

Cascio D, Taormina V, Raso G. Correction: Cascio et al. An Automatic HEp-2 Specimen Analysis System Based on an Active Contours Model and an SVM Classification. Appl. Sci. 2019, 9, 307. Applied Sciences. 2025; 15(17):9337. https://doi.org/10.3390/app15179337

Chicago/Turabian Style

Cascio, Donato, Vincenzo Taormina, and Giuseppe Raso. 2025. "Correction: Cascio et al. An Automatic HEp-2 Specimen Analysis System Based on an Active Contours Model and an SVM Classification. Appl. Sci. 2019, 9, 307" Applied Sciences 15, no. 17: 9337. https://doi.org/10.3390/app15179337

APA Style

Cascio, D., Taormina, V., & Raso, G. (2025). Correction: Cascio et al. An Automatic HEp-2 Specimen Analysis System Based on an Active Contours Model and an SVM Classification. Appl. Sci. 2019, 9, 307. Applied Sciences, 15(17), 9337. https://doi.org/10.3390/app15179337

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Article metric data becomes available approximately 24 hours after publication online.
Back to TopTop