Next Article in Journal
Exploratory Research on Satisfaction Degree in Distance Education
Next Article in Special Issue
Ring Stiffened Cylindrical Shell Structures: State-of-the-Art Review
Previous Article in Journal
Calculation of Three-dimensional Energy Product for Isotropic Nd2Fe14B Magnet
Previous Article in Special Issue
Load-Carrying Capacity of Bailey Bridge in Civil Applications
 
 
Communication
Peer-Review Record

Improved Interaction Formula for the Plastic Resistance of I- and H-Sections under a Combination of Bending Moments My,Ed, Mz,Ed, and Bimoment BEd

Appl. Sci. 2022, 12(15), 7888; https://doi.org/10.3390/app12157888
by Antonio Agüero 1,*, Ivan Baláž 2 and Yvona Koleková 3
Reviewer 1: Anonymous
Reviewer 2: Anonymous
Reviewer 3: Anonymous
Appl. Sci. 2022, 12(15), 7888; https://doi.org/10.3390/app12157888
Submission received: 14 July 2022 / Revised: 1 August 2022 / Accepted: 2 August 2022 / Published: 6 August 2022
(This article belongs to the Special Issue State-of-the-Art in Structural Steel Engineering)

Round 1

Reviewer 1 Report

A concise description of a bending and bimoment interaction on steel I sections. A follow-up to an earlier work of the authors.

I have no comment to the paper nor suggestion except editorial. The formating of the formulas number is often incorrect. There are different fonts mixed in the references.

Author Response

  1. Incorrect formating of formulas numbers.

I cannot see it in the version with changed format by A.S.

  1. Mixed fonts in references.

I cannot see it in the version with changed format by A.S.

Reviewer 2 Report

The authors investigated on a topic titled ‘Improved interaction formula for the plastic resistance of I- and H-sections under a combination of bending 3 moments My,Ed, Mz,Ed and bimoment Bed’. Although the authors stated that this present study attempts to improve the proposal recently published in another journal. This information should be relayed just before the presentation of the methods. The abstract should give brief and detailed information on the improvement made. Also, all abbreviations should be defined at the instance of first use. I consider referring the readers to several articles in the abstract section of another journal as inappropriate. Hence, the whole abstract should be modified to reflect the content of the manuscript only. The content of the whole manuscript is quite difficult to follow, as references are repeatedly made to different previous works.

Author Response

  1. Abstract is fully rewritten following requirements

of reviewer.

  1. Abbreviations are defined at the instance of first

use.

  1. The content of the whole manuscript is modified.

Reviewer 3 Report

Comments of applsci-1835311

 

The main weaknesses of the manuscript:

 

1.     Introduction does not clearly exhibit novelty of reported work in reference to the gap in literature review. Hence, the significance of the work can't be appreciated fully.

2.     The section of Calculation of exact interaction curves: More citations with relevant reference can be added in support of explanations provided.

3.     It is suggested that the conclusion should be expressed more clearly and methodically.

Comments for author File: Comments.docx

Author Response

  1. Introduction now exhibit novelty of reported

work in more clear way.

  1. More citations with relevant reference are added to

support explanations.

3. The conculsion is fully rewritten

Round 2

Reviewer 2 Report

Accept

Back to TopTop