Next Article in Journal
A 3D Printed Linear Pneumatic Actuator for Position, Force and Impedance Control
Next Article in Special Issue
A Bouc–Wen Model-Based Compensation of the Frequency-Dependent Hysteresis of a Piezoelectric Actuator Exhibiting Odd Harmonic Oscillation
Previous Article in Journal
Investigating the Effect of a Mechanism Combined with a Speed-Increasing Gear and a Pneumatic Artificial Muscle
Previous Article in Special Issue
Design of Contactlessly Powered and Piezoelectrically Actuated Tools for Non-Resonant Vibration Assisted Milling
Article Menu

Export Article

Open AccessArticle
Actuators 2018, 7(2), 23; https://doi.org/10.3390/act7020023

Piezoelectric Plates Distribution for Active Control of Torsional Vibrations

Dipartimento di Ingegneria, Università degli Studi Roma Tre, Via della Vasca Navale, 79-00146 Roma, Italy
Current address: Via della Vasca Navale, 79-00146 Roma, Italy.
*
Author to whom correspondence should be addressed.
Received: 21 March 2018 / Revised: 10 May 2018 / Accepted: 10 May 2018 / Published: 19 May 2018
(This article belongs to the Special Issue Piezoelectric Actuators 2018)
Full-Text   |   PDF [7059 KB, uploaded 19 May 2018]   |  

Abstract

The active vibration control systems have received considerable attention in various areas of mechanical engineering. The advent of smart materials has significantly increased the available solutions for engineers in this field. Among these, piezoelectric materials are among the most promising ones but their placement is an important parameter for their efficiency. The optimal placement to damp the flexural modes is a topic widely studied in the literature but this is not for the torsional modes. In this paper a new analytical method to find the optimal placement of piezoelectric plates to control the multimode torsional vibrations of a cantilever beam is proposed. The results are compared with those obtained by a finite element code with a very good agreement. View Full-Text
Keywords: torsional vibrations; piezoelectric actuators; active damping; optimal placement torsional vibrations; piezoelectric actuators; active damping; optimal placement
Figures

Figure 1

This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited (CC BY 4.0).
SciFeed

Share & Cite This Article

MDPI and ACS Style

Botta, F.; Toccaceli, F. Piezoelectric Plates Distribution for Active Control of Torsional Vibrations. Actuators 2018, 7, 23.

Show more citation formats Show less citations formats

Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.

Related Articles

Article Metrics

Article Access Statistics

1

Comments

[Return to top]
Actuators EISSN 2076-0825 Published by MDPI AG, Basel, Switzerland RSS E-Mail Table of Contents Alert
Back to Top