Next Article in Journal
Online Tool Wear Monitoring by the Analysis of Cutting Forces in Transient State for Dry Machining of Ti6Al4V Alloy
Next Article in Special Issue
Preparation and Characterization of Mg-RE Alloy Sheets and Formation of Amorphous/Crystalline Composites by Twin Roll Casting for Biomedical Implant Application
Previous Article in Journal
The Microstructure, Mechanical Properties, and Corrosion Resistance of UNS S32707 Hyper-Duplex Stainless Steel Processed by Selective Laser Melting
Previous Article in Special Issue
Metallic Glasses: A New Approach to the Understanding of the Defect Structure and Physical Properties
 
 
Due to scheduled maintenance work on our servers, there may be short service disruptions on this website between 11:00 and 12:00 CEST on March 28th.
Article

Article Versions Notes

Metals 2019, 9(9), 1013; https://doi.org/10.3390/met9091013
Action Date Notes Link
article html file updated 31 August 2025 01:34 CEST Update https://www.mdpi.com/2075-4701/9/9/1013/html
article html file updated 20 July 2022 03:15 CEST Update -
article html file updated 13 February 2020 18:13 CET Update -
article html file updated 27 September 2019 10:53 CEST Update -
article html file updated 17 September 2019 13:58 CEST Update -
article html file updated 17 September 2019 13:40 CEST Update -
article html file updated 17 September 2019 13:23 CEST Original file -
article pdf uploaded. 17 September 2019 13:07 CEST Version of Record https://www.mdpi.com/2075-4701/9/9/1013/pdf
article xml uploaded. 17 September 2019 13:07 CEST Update https://www.mdpi.com/2075-4701/9/9/1013/xml
article xml file uploaded 17 September 2019 13:07 CEST Original file -
Back to TopTop