Next Article in Journal
Predicting the Tensile Behaviour of Cast Alloys by a Pattern Recognition Analysis on Experimental Data
Next Article in Special Issue
Accuracy and Surface Quality Improvements in the Manufacturing of Ti-6Al-4V Parts Using Hot Single Point Incremental Forming
Previous Article in Journal
Effect of Differentiated Injection Ratio, Gas Flow Rate, and Slag Thickness on Mixing Time and Open Eye Area in Gas-Stirred Ladle Assisted by Physical Modeling
Previous Article in Special Issue
Induction Skull Melting of Ti-6Al-4V: Process Control and Efficiency Optimization
 
 
Article

Article Versions Notes

Metals 2019, 9(5), 556; https://doi.org/10.3390/met9050556
Action Date Notes Link
article xml file uploaded 12 May 2019 12:18 CEST Original file -
article xml uploaded. 12 May 2019 12:18 CEST Update https://www.mdpi.com/2075-4701/9/5/556/xml
article pdf uploaded. 12 May 2019 12:18 CEST Version of Record https://www.mdpi.com/2075-4701/9/5/556/pdf
article html file updated 12 May 2019 12:19 CEST Original file -
article html file updated 5 June 2019 23:31 CEST Update -
article html file updated 19 October 2019 23:56 CEST Update -
article html file updated 12 February 2020 11:49 CET Update -
article html file updated 19 July 2022 18:30 CEST Update https://www.mdpi.com/2075-4701/9/5/556/html
Back to TopTop