Next Article in Journal
Feasibility Study on Application of Synchrotron Radiation μCT Imaging to Alloy Steel for Non-Destructive Inspection of Inclusions
Previous Article in Journal
Ironmaking and Steelmaking
Previous Article in Special Issue
A Comparison between Anodizing and EBSD Techniques for Primary Particle Size Measurement
Article Menu
Issue 5 (May) cover image

Export Article

Open AccessEditorial

Semi-Solid Processing of Alloys and Composites

Department of Chemical and Materials Engineering, University of Alberta, Edmonton, AB T6G 2M7, Canada
The School of Mechanical Engineering, The University of Adelaide, Adelaide, SA 5005, Australia
Authors to whom correspondence should be addressed.
Metals 2019, 9(5), 526;
Received: 29 April 2019 / Accepted: 7 May 2019 / Published: 8 May 2019
(This article belongs to the Special Issue Semi-Solid Processing of Alloys and Composites)
PDF [128 KB, uploaded 8 May 2019]
Note: In lieu of an abstract, this is an excerpt from the first page.


A quick look through the past two centuries tells us that we may be in our third industrial revolution [...] View Full-Text
This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited (CC BY 4.0).

Share & Cite This Article

MDPI and ACS Style

Nafisi, S.; Ghomashchi, R. Semi-Solid Processing of Alloys and Composites. Metals 2019, 9, 526.

Show more citation formats Show less citations formats

Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.

Related Articles

Article Metrics

Article Access Statistics



[Return to top]
Metals EISSN 2075-4701 Published by MDPI AG, Basel, Switzerland RSS E-Mail Table of Contents Alert
Back to Top