Corrosion: Critical Challenge in Wider Use of Magnesium Alloys
Departments of Mechanical & Aerospace Engineering and Chemical Engineering, Monash University, Melbourne, VIC 3800, Australia
School of Mechanical and Manufacturing Engineering, The University of New South Wales, Sydney, NSW 2052, Australia
Department of Metallurgical and Materials Engineering, Malaviya National Institute of Technology, Jaipur 302017, India
Discipline of Metallurgy Engineering and Materials Science, Indian Institute of Technology Indore, Indore 453552, India
Authors to whom correspondence should be addressed.
Received: 30 January 2018 / Revised: 8 February 2018 / Accepted: 9 February 2018 / Published: 11 February 2018
PDF [140 KB, uploaded 11 February 2018]
Note: In lieu of an abstract, this is an excerpt from the first page.
Magnesium alloys, given their high strength-to-weight ratio, are very attractive materials for applications such as aerospace and automotive components.[...]
This is an open access article distributed under the Creative Commons Attribution License
which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited (CC BY 4.0).
Share & Cite This Article
MDPI and ACS Style
Singh, R.; Venkatesh, V.; Kumar, V. Corrosion: Critical Challenge in Wider Use of Magnesium Alloys. Metals 2018, 8, 127.
Singh R, Venkatesh V, Kumar V. Corrosion: Critical Challenge in Wider Use of Magnesium Alloys. Metals. 2018; 8(2):127.
Singh, Raman; Venkatesh, Vijayaraghavan; Kumar, Vinod. 2018. "Corrosion: Critical Challenge in Wider Use of Magnesium Alloys." Metals 8, no. 2: 127.
Show more citation formats
Show less citations formats
Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.
[Return to top]
For more information on the journal statistics, click here
Multiple requests from the same IP address are counted as one view.