Next Article in Journal
Change of the Chemical and Mineralogical Composition of the Slag during Oxygen Blowing in the Oxygen Converter Process
Next Article in Special Issue
A Study on the Machining Characteristics of Curved Workpiece Using Laser-Assisted Milling with Different Tool Paths in Inconel 718
Previous Article in Journal
Novel Opposite Stirring Mode in Bloom Continuous Casting Mould by Combining Swirling Flow Nozzle with EMS
Previous Article in Special Issue
PCBN Performance in High Speed Finishing Turning of Inconel 718
 
 
Article

Article Versions Notes

Metals 2018, 8(10), 843; https://doi.org/10.3390/met8100843
Action Date Notes Link
article xml file uploaded 18 October 2018 12:02 CEST Original file -
article xml uploaded. 18 October 2018 12:02 CEST Update https://www.mdpi.com/2075-4701/8/10/843/xml
article pdf uploaded. 18 October 2018 12:02 CEST Version of Record https://www.mdpi.com/2075-4701/8/10/843/pdf
article html file updated 18 October 2018 12:02 CEST Original file -
article html file updated 30 October 2018 03:19 CET Update -
article html file updated 1 April 2019 08:11 CEST Update -
article html file updated 14 April 2019 13:47 CEST Update -
article html file updated 28 April 2019 18:37 CEST Update -
article html file updated 9 October 2019 05:59 CEST Update -
article html file updated 10 February 2020 16:36 CET Update -
article html file updated 20 July 2022 16:30 CEST Update https://www.mdpi.com/2075-4701/8/10/843/html
Back to TopTop