Correction: Ou et al. Manufacturing and Characterization of NiTi Alloy with Functional Properties by Selective Laser Melting. Metals 2018, 8, 342

Ou, Shih-Fu; Peng, Bou-Yue; Chen, Yi-Cheng; Tsai, Meng-Hsiu

doi:10.3390/met15091031

Open AccessCorrection

Correction: Ou et al. Manufacturing and Characterization of NiTi Alloy with Functional Properties by Selective Laser Melting. Metals 2018, 8, 342

¹

Institute of Mold & Die Engineering, National Kaohsiung University of Applied Sciences, Kaohsiung 807, Taiwan

²

School of Dentistry, College of Oral Medicine, Taipei Medical University, Taipei 110, Taiwan

³

Division of Oral and Maxillofacial Surgery, Department of Dentistry, Taipei Medical University Hospital, Taipei 110, Taiwan

⁴

Casting Section, Metal Industries Research & Development Centre, Kaohsiung 811, Taiwan

^*

Author to whom correspondence should be addressed.

Metals 2025, 15(9), 1031; https://doi.org/10.3390/met15091031

Submission received: 3 September 2025 / Accepted: 8 September 2025 / Published: 18 September 2025

Download

Browse Figure

Versions Notes

In the original publication [1], there was a mistake in Figure 4. The authors plotted two curves using the same dataset. The corrected Figure 4 appears below. The authors state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.

Reference

Ou, S.-F.; Peng, B.-Y.; Chen, Y.-C.; Tsai, M.-H. Manufacturing and Characterization of NiTi Alloy with Functional Properties by Selective Laser Melting. Metals 2018, 8, 342. [Google Scholar] [CrossRef]

Figure 4. X-ray diffractometry (XRD) spectra of NiTi powder with particle sizes of <25 μm, 25–45 μm, and >45 μm.

Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

© 2025 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).

Share and Cite

MDPI and ACS Style

Ou, S.-F.; Peng, B.-Y.; Chen, Y.-C.; Tsai, M.-H. Correction: Ou et al. Manufacturing and Characterization of NiTi Alloy with Functional Properties by Selective Laser Melting. Metals 2018, 8, 342. Metals 2025, 15, 1031. https://doi.org/10.3390/met15091031

AMA Style

Ou S-F, Peng B-Y, Chen Y-C, Tsai M-H. Correction: Ou et al. Manufacturing and Characterization of NiTi Alloy with Functional Properties by Selective Laser Melting. Metals 2018, 8, 342. Metals. 2025; 15(9):1031. https://doi.org/10.3390/met15091031

Chicago/Turabian Style

Ou, Shih-Fu, Bou-Yue Peng, Yi-Cheng Chen, and Meng-Hsiu Tsai. 2025. "Correction: Ou et al. Manufacturing and Characterization of NiTi Alloy with Functional Properties by Selective Laser Melting. Metals 2018, 8, 342" Metals 15, no. 9: 1031. https://doi.org/10.3390/met15091031

APA Style

Ou, S.-F., Peng, B.-Y., Chen, Y.-C., & Tsai, M.-H. (2025). Correction: Ou et al. Manufacturing and Characterization of NiTi Alloy with Functional Properties by Selective Laser Melting. Metals 2018, 8, 342. Metals, 15(9), 1031. https://doi.org/10.3390/met15091031

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Menu

Correction: Ou et al. Manufacturing and Characterization of NiTi Alloy with Functional Properties by Selective Laser Melting. Metals 2018, 8, 342

Reference

Share and Cite

Article Metrics

Article Access Statistics

Further Information

Guidelines

MDPI Initiatives

Follow MDPI