Next Article in Journal
Crash Characteristics of Partially Quenched Curved Products by Three-Dimensional Hot Bending and Direct Quench
Next Article in Special Issue
The Weldability of Duplex Stainless-Steel in Structural Components to Withstand Corrosive Marine Environments
Previous Article in Journal
Influence of Severe Plastic Deformation on Static Recrystallization Microstructure of Pure Iron
Previous Article in Special Issue
Microstructure and Performance Analysis of Welded Joint of Spray-Deposited 2195 Al-Cu-Li Alloy Using GTAW
 
 
Article

Article Versions Notes

Metals 2020, 10(10), 1321; https://doi.org/10.3390/met10101321
Action Date Notes Link
article pdf uploaded. 2 October 2020 13:05 CEST Version of Record https://www.mdpi.com/2075-4701/10/10/1321/pdf-vor
article pdf uploaded. 2 October 2020 13:05 CEST Updated version of record https://www.mdpi.com/2075-4701/10/10/1321/pdf-vor
article pdf uploaded. 2 October 2020 13:05 CEST Updated version of record https://www.mdpi.com/2075-4701/10/10/1321/pdf-vor
article pdf uploaded. 2 October 2020 13:05 CEST Updated version of record https://www.mdpi.com/2075-4701/10/10/1321/pdf-vor
article xml file uploaded 9 October 2020 12:30 CEST Original file -
article xml uploaded. 9 October 2020 12:30 CEST Update https://www.mdpi.com/2075-4701/10/10/1321/xml
article pdf uploaded. 9 October 2020 12:30 CEST Updated version of record https://www.mdpi.com/2075-4701/10/10/1321/pdf
article html file updated 10 October 2020 10:18 CEST Original file -
article html file updated 22 July 2022 09:29 CEST Update https://www.mdpi.com/2075-4701/10/10/1321/html
Back to TopTop