Next Article in Journal
The Impact of EMS on the Temperature Fluctuations, Appearance, and Microstructure of GTA Stainless Steel Welds
Previous Article in Journal
Thermal Fatigue Properties of H13 Hot-Work Tool Steels Processed by Selective Laser Melting
Previous Article in Special Issue
Research of Tribological Properties of 34CrNiMo6 Steel in the Production of a Newly Designed Self-Equalizing Thrust Bearing
Open AccessEditorial

Failure Mechanisms in Alloys

ELKEME Hellenic Research Centre for Metals S.A., 61st km Athens—Lamia National Road, 32011 Oinofyta, Greece
Metals 2020, 10(1), 117; https://doi.org/10.3390/met10010117
Received: 6 January 2020 / Accepted: 10 January 2020 / Published: 13 January 2020
(This article belongs to the Special Issue Failure Mechanisms in Alloys)
Note: In lieu of an abstract, this is an excerpt from the first page.

The era of lean production and excellence in manufacturing, while advancing with sustainable development, demands the rational utilization of raw materials and energy resources, adopting cleaner and environmentally friendly industrial processes [...] View Full-Text
Show Figures

Figure 1

MDPI and ACS Style

Pantazopoulos, G.A. Failure Mechanisms in Alloys. Metals 2020, 10, 117.

Show more citation formats Show less citations formats
Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.

Article Access Map by Country/Region

1
Back to TopTop