Next Article in Journal
Experimental and Numerical Investigation of Tire Tread Wear on Block Level
Next Article in Special Issue
Microstructure Examination and Sliding Wear Behavior of Al-15%Mg2Si-xGd In Situ Composites before and after Hot Extrusion
Previous Article in Journal
Reynolds Model versus JFO Theory in Steadily Loaded Journal Bearings
Previous Article in Special Issue
Friction and Wear Pattern of Silica-Reinforced Styrene-Butadiene Rubber (SBR) in Sliding Contact with a Blade Indenter
 
 

Order Article Reprints

Journal: Lubricants, 2021
Volume: 9
Number: 112

Article: Tribological Characterization of Polyether Ether Ketone (PEEK) Polymers Produced by Additive Manufacturing for Hydrodynamic Bearing Application
Authors: by Davide Massocchi, Giacomo Riboni, Nora Lecis, Steven Chatterton and Paolo Pennacchi
Link: https://www.mdpi.com/2075-4442/9/11/112

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop