Whole Elliptical Surface Polishing Using a Doughnut-Shaped MCF Polishing Tool with Variable Tilt Angle
Abstract
:1. Introduction
2. Materials and Methods
2.1. Materials
2.2. Processing Method
3. Results and Discussion
3.1. Polishing Feasibility
3.2. Polishing Characteristic
3.3. Polishing Tool
4. Conculsions
Author Contributions
Funding
Institutional Review Board Statement
Informed Consent Statement
Data Availability Statement
Conflicts of Interest
Abbreviations
Magnetic compound fluid | MCF |
Single-crystal diamond turning | SCDT |
Magnetic fluid | MF |
Magnetorheological | MR |
Magnetic abrasives | MAs |
Carbonyl-iron-particles | CIPs |
Magnetite particles | MPs |
Analytical pure | AR |
Degree of freedom | DOF |
Scanning electron microscopy | SEM |
Energy-dispersive X-ray | EDX |
References
- Li, M.; Xie, J. Green-chemical-jump-thickening polishing for silicon carbide. Ceram. Int. 2022, 48, 1107–1124. [Google Scholar] [CrossRef]
- Yao, W.; Yuan, J.; Zhou, F.; Chen, Z.; Zhao, T.; Zhong, M. Trajectory analysis and experiments of both-sides cylindrical lapping in eccentric rotation. Int. J. Adv. Manuf. Technol. 2017, 88, 2849–2859. [Google Scholar] [CrossRef]
- Deng, Q.; Wang, Y.; Sun, L.; Lyu, B.; Yuan, J.; Zhao, P.; Lu, H. A polishing method using self-excited oscillation abrasive flow for the inner surface of workpiece. Int. J. Adv. Manuf. Technol. 2022, 119, 4093–4108. [Google Scholar]
- Li, M.; Karpuschewski, B.; Ohmori, H.; Riemer, O.; Wang, Y.; Dong, T. Adaptive shearing-gradient thickening polishing (AS-GTP) and subsurface damage inhibition. Int. J. Mach. Tools Manuf. 2021, 160, 103651. [Google Scholar]
- Feng, M.; Wu, Y.; Wang, Y.; Zeng, J.; Bitoh, T.; Nomura, M.; Fujii, T. Investigation on the polishing of aspheric surface with a doughnut-shaped magnetic compound fluid tool. Precis. Eng. 2020, 61, 182–193. [Google Scholar]
- Li, M.; Liu, M.; Riemer, O.; Song, F.; Lyu, B. Anhydrous based shear-thickening polishing of KDP crystal. Chin. J. Aeronaut. 2021, 34, 90–99. [Google Scholar]
- Li, M.; Song, F.; Huang, Z. Control strategy of machining efficiency and accuracy in weak-chemical-coordinated-thickening polishing (WCCTP) process on spherical curved 9Cr18 components. J. Manuf. Processes 2022, 74, 266–282. [Google Scholar]
- Yao, W.; Chu, Q.; Lyu, B.; Wang, C.; Shao, Q.; Feng, M.; Wu, Z. Modeling of Material Removal Based on Multi-scale Contact in Cylindrical Polishing. Int. J. Mech. Sci. 2022, 223, 107287–107299. [Google Scholar]
- Shimada, K.; Fujita, T.; Oka, H.; Akagami, Y.; Kamiyama, S. Hydrodynamic and magnetized characteristics of MCF (magnetic compound fluid). Jpn. Soc. Mech. 2001, 664, 3034–3040. [Google Scholar]
- Li, M.; Liu, M.; Riemer, O.; Karpuschewski, B.; Tang, C. Origin of material removal mechanism in shear thickening-chemical polishing. Int. J. Mach. Tools Manuf. 2021, 170, 103800–103813. [Google Scholar]
- Ma, Z.; Wang, Q.; Chen, H.; Chen, L.; Qu, S.; Wang, Z.; Yu, T. A grinding force predictive model and experimental validation for the laser-assisted grinding (LAG) process of zirconia ceramic. J. Mater. Process. Technol. 2022, 302, 117492–117511. [Google Scholar] [CrossRef]
- Ma, Z.; Wang, Q.; Chen, H.; Chen, L.; Meng, F.; Chen, X.; Yu, T. Surface prediction in laser-assisted grinding process considering temperature-dependent mechanical properties of zirconia ceramic. J. Manuf. Processes 2022, 80, 491–503. [Google Scholar] [CrossRef]
- Shimada, K.; Akagami, Y.; Kamiyama, S.; Fujita, T.; Miyazaki, T.; Shibayama, A. New microscopic polishing with magnetic compound fluid (MCF). J. Intell. Mater. Syst. Struct. 2002, 13, 405–408. [Google Scholar] [CrossRef]
- Shimada, K.; Wu, Y.; Matsuo, Y.; Yamamoto, K. Float polishing technique using new tool consisting of micro magnetic clusters’. J. Mater. Process. Technol. 2005, 162, 690–695. [Google Scholar] [CrossRef]
- Feng, M.; Wang, Y.; Bitou, T.; Nomura, M.; Fujii, T.; Wu, Y. Polishing investigation on zirconia ceramics using magnetic compound fluid (MCF) slurry. Int. J. Abras. Technol. 2019, 9, 257–275. [Google Scholar] [CrossRef]
- Li, M.; Karpuschewski, B.; Riemer, O. Controllable polishing process for machining of barium borate. CIRP J. Manuf. Sci. Technol. 2022, 37, 291–301. [Google Scholar] [CrossRef]
- Wang, Y.; Wu, Y.; Nomura, M. Fundamental investigation on nano-precision surface finishing of electroless Ni–P-plated STAVAX steel using magnetic compound fluid slurry. Precis. Eng. 2017, 48, 32–44. [Google Scholar]
- Wang, Y.; Wu, Y.; Nomura, M. Feasibility study on surface finishing of miniature V-grooves with magnetic compound fluid slurry. Precis. Eng. 2016, 45, 67–78. [Google Scholar] [CrossRef]
- Guo, H.; Wu, Y. Ultrafine polishing of optical polymer with zirconia-coated carbonyl-iron-particle-based magnetic compound fluid slurry. Int. J. Adv. Manuf. Technol. 2016, 85, 253–261. [Google Scholar] [CrossRef]
- Feng, M.; Xie, Y.; Chen, L.; Wu, Y. Effect of the component of magnetic compound fluid (MCF) slurry on the polishing characteristics in aspheric surface finishing with the doughnut-shaped MCF tool. Precis. Eng. 2022, 65, 216–229. [Google Scholar]
- Ding, R.; Lei, H.; Xu, L.; Chen, Y. Surface planarization of zirconia ceramic achieved by polyacrylamide grafted nanodiamond composite abrasives through chemical mechanical polishing. Ceram. Int. 2022, 48, 19900–19912. [Google Scholar] [CrossRef]
- Wang, C.; Loh, Y.M.; Cheung, C.F.; Wang, S.; Ho, L.T.; Li, Z. Shape-adaptive magnetic field-assisted batch polishing of three-dimensional surfaces. Precis. Eng. 2022, 76, 261–283. [Google Scholar] [CrossRef]
Parameters | Value |
---|---|
Slurry | MCF1, MCF2, MCF3 |
Working gap h | 1, 1.5, 2, 2.5, 3 mm |
Revolution speed of MCF carrier | 100, 200, 300, 400, 500 rpm |
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations. |
© 2022 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).
Share and Cite
Feng, M.; Lei, Y.; Chen, Z.; Zhang, X.; Chen, X.; Wang, Y. Whole Elliptical Surface Polishing Using a Doughnut-Shaped MCF Polishing Tool with Variable Tilt Angle. Lubricants 2022, 10, 232. https://doi.org/10.3390/lubricants10100232
Feng M, Lei Y, Chen Z, Zhang X, Chen X, Wang Y. Whole Elliptical Surface Polishing Using a Doughnut-Shaped MCF Polishing Tool with Variable Tilt Angle. Lubricants. 2022; 10(10):232. https://doi.org/10.3390/lubricants10100232
Chicago/Turabian StyleFeng, Ming, Yang Lei, Zhixiang Chen, Xianglei Zhang, Xizhang Chen, and Youliang Wang. 2022. "Whole Elliptical Surface Polishing Using a Doughnut-Shaped MCF Polishing Tool with Variable Tilt Angle" Lubricants 10, no. 10: 232. https://doi.org/10.3390/lubricants10100232