Next Article in Journal
Unsupervised Tool Wear Monitoring in the Corner Milling of a Titanium Alloy Based on a Cutting Condition-Independent Method
Next Article in Special Issue
Dynamic Modeling of a Hydraulic Excavator Stick by Introducing Multi-Case Synthesized Load Spectrum for Bench Fatigue Test
Previous Article in Journal
Research on Tire/Road Peak Friction Coefficient Estimation Considering Effective Contact Characteristics between Tire and Three-Dimensional Road Surface
Previous Article in Special Issue
Machining of Wood Plastic Composite Using AWJ Technology with Controlled Output Quality
 
 
Article

Article Versions Notes

Machines 2022, 10(8), 615; https://doi.org/10.3390/machines10080615
Action Date Notes Link
article xml file uploaded 27 July 2022 11:10 CEST Original file -
article xml uploaded. 27 July 2022 11:10 CEST Update https://www.mdpi.com/2075-1702/10/8/615/xml
article pdf uploaded. 27 July 2022 11:10 CEST Version of Record https://www.mdpi.com/2075-1702/10/8/615/pdf
article html file updated 27 July 2022 11:12 CEST Original file -
article html file updated 13 August 2022 03:58 CEST Update -
article html file updated 10 September 2025 20:49 CEST Update https://www.mdpi.com/2075-1702/10/8/615/html
Back to TopTop