Next Article in Journal
Machining of Wood Plastic Composite Using AWJ Technology with Controlled Output Quality
Previous Article in Journal
Electrical Machines Winding Technology: Latest Advancements for Transportation Electrification
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Machines
Volume 10
Issue 7
10.3390/machines10070564
machines-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

The Influence of Diamond Burnishing Process Parameters on Surface Roughness of Low-Alloyed Aluminium Workpieces

by
Viktoria Ferencsik
and
Gyula Varga
*
Institute of Manufacturing Science, University of Miskolc, H-3515 Miskolc, Hungary
*
Author to whom correspondence should be addressed.
Machines 2022, 10(7), 564; https://doi.org/10.3390/machines10070564
Submission received: 24 June 2022 / Revised: 12 July 2022 / Accepted: 13 July 2022 / Published: 14 July 2022
(This article belongs to the Section Friction and Tribology)
Browse Figures
Review Reports Versions Notes

Abstract

This study describes the determination and optimization of burnishing process parameters and their effects on surface roughness of EN AW-2011 aluminium alloy workpieces. The process has a low environmental load and the chip-free burnishing process improves the integrity of the machined surface, but to achieve this, the different burnishing parameters, for example, burnishing force, feed rate, speed and number of passes, must be properly defined according to the material of the workpiece. In our research, a full factorial experimental design method is used to plan and carry out the experiments and to determine the most appropriate parameter range for this material quality.
Keywords: cold plastic forming; burnishing; surface roughness; full factorial experimental design cold plastic forming; burnishing; surface roughness; full factorial experimental design

Share and Cite

MDPI and ACS Style

Ferencsik, V.; Varga, G. The Influence of Diamond Burnishing Process Parameters on Surface Roughness of Low-Alloyed Aluminium Workpieces. Machines 2022, 10, 564. https://doi.org/10.3390/machines10070564

AMA Style

Ferencsik V, Varga G. The Influence of Diamond Burnishing Process Parameters on Surface Roughness of Low-Alloyed Aluminium Workpieces. Machines. 2022; 10(7):564. https://doi.org/10.3390/machines10070564

Chicago/Turabian Style

Ferencsik, Viktoria, and Gyula Varga. 2022. "The Influence of Diamond Burnishing Process Parameters on Surface Roughness of Low-Alloyed Aluminium Workpieces" Machines 10, no. 7: 564. https://doi.org/10.3390/machines10070564

APA Style

Ferencsik, V., & Varga, G. (2022). The Influence of Diamond Burnishing Process Parameters on Surface Roughness of Low-Alloyed Aluminium Workpieces. Machines, 10(7), 564. https://doi.org/10.3390/machines10070564

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop