Next Article in Journal
The Effect of Crystallinity on Compressive Properties of Al-PTFE
Next Article in Special Issue
Preparation and Characterization of High Surface Area Activated Carbon Fibers from Lignin
Previous Article in Journal
Low Density Wood-Based Particleboards Bonded with Foamable Sour Cassava Starch: Preliminary Studies
Previous Article in Special Issue
Study of Polymer Matrix Degradation Behavior in CFRP Short Pulsed Laser Processing
 
 

Order Article Reprints

Journal: Polymers, 2016
Volume: 8
Number: 355

Article: The Effect of Injection Molding Temperature on the Morphology and Mechanical Properties of PP/PET Blends and Microfibrillar Composites
Authors: by Maja Kuzmanović, Laurens Delva, Ludwig Cardon and Kim Ragaert
Link: https://www.mdpi.com/2073-4360/8/10/355

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop