Next Article in Journal
Advanced Prediction and Analysis of Delamination Failure in Graphite-Reinforced Epoxy Composites Using VCCT-Based Finite Element Modelling Techniques
Next Article in Special Issue
Experimental and Numerical Research of 3D DLP-Printed Solid and Voronoi PLA Resin Specimens Under Tensile and Bending Loads
Previous Article in Journal
Investigation of the Effects of Different Curing Methods on the Adhesion Strength of Single-Lap Joints Produced by Bonding 3D-Printed ABS and PLA Plates with Different Epoxy Adhesives
Previous Article in Special Issue
Nonlinear Viscoelasticity of and Structural Modulation in Guar Gum-Enhanced Triple-Network Hydrogels
 
 
Article

Article Versions Notes

Polymers 2025, 17(6), 769; https://doi.org/10.3390/polym17060769
Action Date Notes Link
article xml file uploaded 14 March 2025 11:27 CET Original file -
article xml uploaded. 14 March 2025 11:27 CET Update https://www.mdpi.com/2073-4360/17/6/769/xml
article pdf uploaded. 14 March 2025 11:27 CET Version of Record https://www.mdpi.com/2073-4360/17/6/769/pdf
article html file updated 14 March 2025 11:28 CET Original file https://www.mdpi.com/2073-4360/17/6/769/html
Back to TopTop