Article Versions Notes

Fuentes JM, Cadena H, Remache A, Flor-Unda O, Sarria S, Delgado J, Bonilla P, Ferrándiz S. Effects of Sterilization Processes with Hydrogen Peroxide and Ethylene Oxide on Commercial 3D-Printed PLA, PLA-FC, and PETG by Fused Deposition Modeling. Polymers. 2025; 17(21):2864. https://doi.org/10.3390/polym17212864

Fuentes, Jorge Mauricio, Homero Cadena, Abel Remache, Omar Flor-Unda, Santiago Sarria, Jonathan Delgado, Pablo Bonilla, and Santiago Ferrándiz. 2025. "Effects of Sterilization Processes with Hydrogen Peroxide and Ethylene Oxide on Commercial 3D-Printed PLA, PLA-FC, and PETG by Fused Deposition Modeling" Polymers 17, no. 21: 2864. https://doi.org/10.3390/polym17212864

Fuentes, J. M., Cadena, H., Remache, A., Flor-Unda, O., Sarria, S., Delgado, J., Bonilla, P., & Ferrándiz, S. (2025). Effects of Sterilization Processes with Hydrogen Peroxide and Ethylene Oxide on Commercial 3D-Printed PLA, PLA-FC, and PETG by Fused Deposition Modeling. Polymers, 17(21), 2864. https://doi.org/10.3390/polym17212864