Next Article in Journal
Investigating the Deformation Characteristics of Buried High-Density Polyethylene Pipes: Considering the Effect of Sequentially Applying Pressure and Elevating Temperature
Next Article in Special Issue
Development of an Epoxy-Based Rapid Tool with Low Vulcanization Energy Consumption Channels for Liquid Silicone Rubber Injection Molding
Previous Article in Journal
Lignocellulosic-Based Materials from Bean and Pistachio Pod Wastes for Dye-Contaminated Water Treatment: Optimization and Modeling of Indigo Carmine Sorption
Previous Article in Special Issue
Filling-Balance-Oriented Parameters for Multi-Cavity Molds in Polyvinyl Chloride Injection Molding
 
 

Order Article Reprints

Journal: Polymers, 2022
Volume: 14
Number: 3775

Article: Quality Definition in Micro Injection Molding Process by Means of Surface Characterization Parameters
Authors: by Vincenzo Bellantone, Rossella Surace and Irene Fassi
Link: https://www.mdpi.com/2073-4360/14/18/3775

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop