Next Article in Journal
Investigating the Deformation Characteristics of Buried High-Density Polyethylene Pipes: Considering the Effect of Sequentially Applying Pressure and Elevating Temperature
Next Article in Special Issue
Development of an Epoxy-Based Rapid Tool with Low Vulcanization Energy Consumption Channels for Liquid Silicone Rubber Injection Molding
Previous Article in Journal
Lignocellulosic-Based Materials from Bean and Pistachio Pod Wastes for Dye-Contaminated Water Treatment: Optimization and Modeling of Indigo Carmine Sorption
Previous Article in Special Issue
Filling-Balance-Oriented Parameters for Multi-Cavity Molds in Polyvinyl Chloride Injection Molding
 
 
Article

Article Versions Notes

Polymers 2022, 14(18), 3775; https://doi.org/10.3390/polym14183775
Action Date Notes Link
article xml file uploaded 9 September 2022 13:01 CEST Original file -
article xml uploaded. 9 September 2022 13:01 CEST Update https://www.mdpi.com/2073-4360/14/18/3775/xml
article pdf uploaded. 9 September 2022 13:01 CEST Version of Record https://www.mdpi.com/2073-4360/14/18/3775/pdf
article html file updated 9 September 2022 13:02 CEST Original file -
article html file updated 28 February 2023 13:00 CET Update https://www.mdpi.com/2073-4360/14/18/3775/html
Back to TopTop