Next Article in Journal
Removal of Ibuprofen from Water by Different Types Membranes
Next Article in Special Issue
Ultrathin Multilayer Textile Structure with Enhanced EMI Shielding and Air-Permeable Properties
Previous Article in Journal
Analysis, Development, and Scaling-Up of Poly(lactic acid) (PLA) Biocomposites with Hazelnuts Shell Powder (HSP)
Previous Article in Special Issue
Effect of Silicone Inlaid Materials on Reinforcing Compressive Strength of Weft-Knitted Spacer Fabric for Cushioning Applications
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Shaping in the Third Direction; Synthesis of Patterned Colloidal Crystals by Polyester Fabric-Guided Self-Assembly

Lasers Department of National Institute for Lasers, Plasma and Radiation Physics, 409 Atomistilor Street, 077125 Bucharest, Romania
*
Authors to whom correspondence should be addressed.
Polymers 2021, 13(23), 4081; https://doi.org/10.3390/polym13234081
Submission received: 27 October 2021 / Revised: 17 November 2021 / Accepted: 22 November 2021 / Published: 24 November 2021

Abstract

A polyester fabric with rectangular openings was used as a sacrificial template for the guiding of a sub-micron sphere (polystyrene (PS) and silica) aqueous colloid self-assembly process during evaporation as a patterned colloidal crystal (PCC). This simple process is also a robust one, being less sensitive to external parameters (ambient pressure, temperature, humidity, vibrations). The most interesting feature of the concave-shape-pattern unit cell (350 μm × 400 μm × 3 μm) of this crystal is the presence of triangular prisms at its border, each prism having a one-dimensional sphere array at its top edge. The high-quality ordered single layer found inside of each unit cell presents the super-prism effect and left-handed behavior. Wider yet elongated deposits with ordered walls and disordered top surfaces were formed under the fabric knots. Rectangular patterning was obtained even for 20 μm PS spheres. Polyester fabrics with other opening geometries and sizes (~300–1000 μm) or with higher fiber elasticity also allowed the formation of similar PCCs, some having curved prismatic walls. A higher colloid concentration (10–20%) induces the formation of thicker walls with fiber-negative replica morphology. Additionally, thick-wall PCCs (~100 μm) with semi-cylindrical morphology were obtained using SiO2 sub-microspheres and a wavy fabric. The colloidal pattern was used as a lithographic mask for natural lithography and as a template for the synthesis of triangular-prism-shaped inverted opals.
Keywords: colloidal crystals; polyester fabric; polystyrene; silica; sub-micron spheres; self-assembly; negative diffraction; super-prism effect colloidal crystals; polyester fabric; polystyrene; silica; sub-micron spheres; self-assembly; negative diffraction; super-prism effect

Share and Cite

MDPI and ACS Style

Sandu, I.; Fleaca, C.T.; Dumitrache, F.; Sava, B.A.; Urzica, I.; Antohe, I.; Brajnicov, S.; Dumitru, M. Shaping in the Third Direction; Synthesis of Patterned Colloidal Crystals by Polyester Fabric-Guided Self-Assembly. Polymers 2021, 13, 4081. https://doi.org/10.3390/polym13234081

AMA Style

Sandu I, Fleaca CT, Dumitrache F, Sava BA, Urzica I, Antohe I, Brajnicov S, Dumitru M. Shaping in the Third Direction; Synthesis of Patterned Colloidal Crystals by Polyester Fabric-Guided Self-Assembly. Polymers. 2021; 13(23):4081. https://doi.org/10.3390/polym13234081

Chicago/Turabian Style

Sandu, Ion, Claudiu Teodor Fleaca, Florian Dumitrache, Bogdan Alexandru Sava, Iuliana Urzica, Iulia Antohe, Simona Brajnicov, and Marius Dumitru. 2021. "Shaping in the Third Direction; Synthesis of Patterned Colloidal Crystals by Polyester Fabric-Guided Self-Assembly" Polymers 13, no. 23: 4081. https://doi.org/10.3390/polym13234081

APA Style

Sandu, I., Fleaca, C. T., Dumitrache, F., Sava, B. A., Urzica, I., Antohe, I., Brajnicov, S., & Dumitru, M. (2021). Shaping in the Third Direction; Synthesis of Patterned Colloidal Crystals by Polyester Fabric-Guided Self-Assembly. Polymers, 13(23), 4081. https://doi.org/10.3390/polym13234081

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop