Next Article in Journal
Editorial for the Special Issue on Ultra Precision Technologies for Micromachining, Volume II
Previous Article in Journal
A Tuneable Pressure-Based Energy Harvester for Powering the Environmental Internet of Things
Previous Article in Special Issue
An Electrochemical Tilt Sensor with Double-Band Electrodes Fabricated by Wire Winding
 
 
Article
Peer-Review Record

The Phase Modulating Micro-Mover Based on the MHD/MET System in the Reference Arm of the Scanning Interferometer

Micromachines 2022, 13(11), 1972; https://doi.org/10.3390/mi13111972
by Sergey Kalenkov 1,*, Pavel Skvortsov 1,2, Aleksandr Tarasenko 1, Dmitry Sharov 1 and Alexander Shtanko 3
Reviewer 1:
Reviewer 2:
Reviewer 3: Anonymous
Micromachines 2022, 13(11), 1972; https://doi.org/10.3390/mi13111972
Submission received: 15 September 2022 / Revised: 4 November 2022 / Accepted: 7 November 2022 / Published: 14 November 2022
(This article belongs to the Special Issue Progress in Electrochemical Sensors)

Round 1

Reviewer 1 Report

1. Though the blue curve stands for the current passing through the cell, I suggest a secondary vertical axis in figure 5 to illustrate voltage and current on the same chart. At current state, the reader need to calculate the current value according to the voltage value and 10 ohm resistance. The same suggestion is for figure6.

2. In the sentence of "In the process of the continuous displacement of the mirror a set of interferograms is registered in each pixel of the senor", I guess "senor" should be "sensor".

3. Too much content is used to describe the scanning interferometer, more experiments should be implemented and more results should be illustrated to describe and verify the performance of the micro-mover.

Author Response

Authors thank reviewer for comments and suggestion to our manuscript.

Based on these comments we modified a manuscript.

Our point by point  comments are added as separate Word document.

Author Response File: Author Response.docx

Reviewer 2 Report

See attached file

Comments for author File: Comments.pdf

Author Response

We thank reviewer for very valuable comments and suggestions.

Based on that we significantly modified the document.

The detailed point by point response is added as a separate word document.

Besides , the English has been corrected by profissional interpreter. 

Author Response File: Author Response.docx

Reviewer 3 Report

See uploaded file.

Comments for author File: Comments.pdf

Author Response

Authors thank reviewer for very valuable comments.

Our point by point responses is presented in separate Word document.

Besides, the manuscript has been checked and corrected by professional interpreter.

Author Response File: Author Response.docx

Round 2

Reviewer 1 Report

no further comments

Reviewer 2 Report

The authors have taken my recommendations into account and provided an answer. I do not agree 100% but it would not be fair on my side to stick to some minor disagreements. Let this manuscript now be accepted for publication.

Back to TopTop