Next Article in Journal
Wind Farm Layout Optimization/Expansion with Real Wind Turbines Using a Multi-Objective EA Based on an Enhanced Inverted Generational Distance Metric Combined with the Two-Archive Algorithm 2
Previous Article in Journal
Multinational Enterprises, Sustainability and Innovation
Previous Article in Special Issue
The Use of a Simplified Carbon Footprint Tool for Organic Waste Managers: Pros and Cons
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Correction

Correction: Rimano et al. The Environmental Impact of Organizations: A Pilot Test from the Packaging Industry Based on Organizational Life Cycle Assessment. Sustainability 2021, 13, 11402

1
Aptar Italia S.p.A., Via Po 49, San Giovanni Teatino, 66020 Chieti, Italy
2
Department of Economic Studies, University “G. d’Annunzio”, Viale Pindaro 42, 65127 Pescara, Italy
*
Author to whom correspondence should be addressed.
Sustainability 2023, 15(3), 2528; https://doi.org/10.3390/su15032528
Submission received: 20 December 2022 / Accepted: 22 December 2022 / Published: 31 January 2023
The authors would like to make the following corrections about the published paper [1]. The changes are as follows.
The authors would like to delete repeated parts in Table 1 and replace Table 1 to:
The authors and the Editorial Office would like to apologize for any inconvenience caused to the readers and state that the scientific conclusions are unaffected. The original article has been updated.

Reference

  1. Rimano, M.; Simboli, A.; Taddeo, R.; Del Grosso, M.; Raggi, A. The Environmental Impact of Organizations: A Pilot Test from the Packaging Industry Based on Organizational Life Cycle Assessment. Sustainability 2021, 13, 11402. [Google Scholar] [CrossRef]
Table 1. Data quality assessment.
Table 1. Data quality assessment.
FlowSpecific or GenericReliabilityCompletenessTemporal CorrelationGeographical Correlation Technological Correlation
INPUT
Electrical energy
Electrical energy from renewable sourcesS11111
T&D lossesG1 *2132
Water
WaterS11111
Mass
Resins (for molding)S11111
Resins (components)S21111
Metals (components)S21111
Auxiliary materialsS11111
PackagingS11111
Maintenance productsS15111
Other products (e.g., for offices)S11111
FuelsS21111
RefrigerantsS11111
Transport
Incoming transportS21111
Employee commutingS21111
Business travelsS12111
Outbound transportS21111
OUTPUT
Products and by-products
CartridgesS11111
Finished productsS11111
By-productsS11111
Waste
WasteS11111
* Third party certified (ISO14025).
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Rimano, M.; Simboli, A.; Taddeo, R.; Del Grosso, M.; Raggi, A. Correction: Rimano et al. The Environmental Impact of Organizations: A Pilot Test from the Packaging Industry Based on Organizational Life Cycle Assessment. Sustainability 2021, 13, 11402. Sustainability 2023, 15, 2528. https://doi.org/10.3390/su15032528

AMA Style

Rimano M, Simboli A, Taddeo R, Del Grosso M, Raggi A. Correction: Rimano et al. The Environmental Impact of Organizations: A Pilot Test from the Packaging Industry Based on Organizational Life Cycle Assessment. Sustainability 2021, 13, 11402. Sustainability. 2023; 15(3):2528. https://doi.org/10.3390/su15032528

Chicago/Turabian Style

Rimano, Michela, Alberto Simboli, Raffaella Taddeo, Michele Del Grosso, and Andrea Raggi. 2023. "Correction: Rimano et al. The Environmental Impact of Organizations: A Pilot Test from the Packaging Industry Based on Organizational Life Cycle Assessment. Sustainability 2021, 13, 11402" Sustainability 15, no. 3: 2528. https://doi.org/10.3390/su15032528

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop