Sustainability Performance Evaluation of Faceshield Bracket Manufacturing by Using the Analytic Hierarchy Process

Faceshield brackets were among highly relevant products manufactured in various workshops, including Sigma Clermont, during the outbreak of COVID-19 to tackle acute shortages of personal protective equipment. However, many of these products are yet to be checked for appropriateness in design, quality, safety, comfort, and overall sustainability performance which might lead to unknown damages to human health and the environment. Thus, the main objective of this study is to evaluate the sustainable performance of Faceshield bracket manufacturing. Appropriate data are collected from designers, machine operators, and supplementary data are utilized from experts’ opinions and literature. A total of 38 carefully selected indicator sets are utilized while applying multicriteria decision-making methodology (MCDM) of the analytic hierarchy process (AHP) to evaluate the sustainability performance of these manufacturing processes. Evaluation is performed to examine the processes’ sustainability performance and associated indicator contribution based on the three dimensions. Results disclosed that 3D printing (score = 0.108) showed better performance for the environment, and injection molding showed better economic and social performance, with scores of 0.1922 and 0.160, respectively. A detailed contribution of each subcriteria for each sustainability dimension and each of the three processes as well as major contributing indicators are identified and discussed. Finally, overall performance was assessed using the total sum approach, and Borda count methodology and injection molding showed better sustainability performance in the manufacturing of Faceshield brackets considered with scores of 43 and 87, respectively. The authors believe that indicator selection approaches and overall methodology followed for this study will be relevant for future sustainability evaluation of engineering products.