Next Article in Journal
Research on the Factors Affecting the Risk Premium of China’s Green Bond Issuance
Next Article in Special Issue
Lifetime Analysis of Energy Storage Systems for Sustainable Transportation
Previous Article in Journal
Economic Productivity vs. Ecological Protection in Danube Floodplain. Case Study: Danube’s Sector between Olt and Vedea
Previous Article in Special Issue
A Comparative Study on the Influence of DC/DC-Converter Induced High Frequency Current Ripple on Lithium-Ion Batteries
 
 
Article

Study of a Li-Ion Cell Kinetics in Five Regions to Predict Li Plating Using a Pseudo Two-Dimensional Model

Electrical Energy Storage Systems, Institute for Photovoltaics, University of Stuttgart, Pfaffenwaldring 47, 70569 Stuttgart, Germany
*
Author to whom correspondence should be addressed.
Sustainability 2019, 11(22), 6392; https://doi.org/10.3390/su11226392
Received: 17 October 2019 / Revised: 5 November 2019 / Accepted: 7 November 2019 / Published: 14 November 2019
Detecting or predicting lithium plating in Li-ion cells and subsequently suppressing or preventing it have been the aim of many researches as it directly contributes to the aging, safety, and life-time of the cell. Although abundant influencing parameters on lithium deposition are already known, more information is still needed in order to predict this phenomenon and prevent it in time. It is observed that balancing in a Li-ion cell can play an important role in controlling lithium plating. In this work, five regions are defined with the intention of covering all the zones participating in the charge transfer from one electrode to the other during cell cycling. We employ a pseudo two-dimensional (P2D) cell model including two irreversible side reactions of solid electrolyte interface (SEI) formation and lithium plating (Li-P) as the anode aging mechanisms. With the help of simulated data and the Nernst–Einstein relation, ionic conductivities of the regions are calculated separately. Calculation results show that by aging the cell, more deviation between ionic conductivities of cathode and anode takes place which leads to the start of Li plating. View Full-Text
Keywords: li-ion cells; lithium plating; kinetic balancing; ionic conductivity; modeling li-ion cells; lithium plating; kinetic balancing; ionic conductivity; modeling
Show Figures

Figure 1

MDPI and ACS Style

Momeni Boroujeni, S.; Birke, K.P. Study of a Li-Ion Cell Kinetics in Five Regions to Predict Li Plating Using a Pseudo Two-Dimensional Model. Sustainability 2019, 11, 6392. https://doi.org/10.3390/su11226392

AMA Style

Momeni Boroujeni S, Birke KP. Study of a Li-Ion Cell Kinetics in Five Regions to Predict Li Plating Using a Pseudo Two-Dimensional Model. Sustainability. 2019; 11(22):6392. https://doi.org/10.3390/su11226392

Chicago/Turabian Style

Momeni Boroujeni, Sanaz, and Kai Peter Birke. 2019. "Study of a Li-Ion Cell Kinetics in Five Regions to Predict Li Plating Using a Pseudo Two-Dimensional Model" Sustainability 11, no. 22: 6392. https://doi.org/10.3390/su11226392

Find Other Styles
Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.

Article Access Map by Country/Region

1
Back to TopTop