Next Article in Journal
Blockchain Practices, Potentials, and Perspectives in Greening Supply Chains
Next Article in Special Issue
Enhancing Sustainability and Energy Efficiency in Smart Factories: A Review
Previous Article in Journal
The Impact of Perceived Value on Farmers’ Regret Mood Tendency
Article Menu
Issue 10 (October) cover image

Export Article

Open AccessArticle

A Sustainable Decision-Making Framework for Transitioning to Robotic Welding for Small and Medium Manufacturers

School of Integrated Sciences, College of Integrated Science and Engineering, James Madison University, Harrisonburg, VA 22801, USA
Author to whom correspondence should be addressed.
Sustainability 2018, 10(10), 3651;
Received: 17 September 2018 / Revised: 8 October 2018 / Accepted: 10 October 2018 / Published: 12 October 2018
(This article belongs to the Special Issue Sustainable Intelligent Manufacturing Systems)
PDF [946 KB, uploaded 12 October 2018]


Small and medium-sized enterprises (SMEs) face challenges in implementing industrial robotics in their manufacturing due to limited resources and expertise. There is still good economic potential in using industrial robotics, however, due to manufacturers leaning toward newer technology and automated processes. The research on sustainability decision-making for transitioning a traditional process to a robotic process is limited for SMEs. This study presents a systemic framework for assessing the sustainability of implementing robotic techniques in key processes that would benefit SMEs. The framework identifies several key economic, technical, and managerial decision-making factors during the transition phase. Sustainability assessments, including cost, environmental impact, and social impact, are used in the framework for engineers and managers to evaluate the technical and sustainability trade-offs of the transition. A case study was conducted on a typical US metal fabrication SME focusing on transitioning a shielded metal arc welding (SMAW) process to a robotic gas metal arc welding (GMAW) process. A sustainability assessment was conducted following the framework. The results suggest that the transition phase involves numerous factors for engineers and managers to consider and the proposed framework will benefit SMEs by providing an analytical method for industrial robotics implementation decision-making. View Full-Text
Keywords: sustainable manufacturing; decision-making; small to medium manufacturers; welding sustainable manufacturing; decision-making; small to medium manufacturers; welding

Figure 1

This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited (CC BY 4.0).

Share & Cite This Article

MDPI and ACS Style

Epping, K.; Zhang, H. A Sustainable Decision-Making Framework for Transitioning to Robotic Welding for Small and Medium Manufacturers. Sustainability 2018, 10, 3651.

Show more citation formats Show less citations formats

Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.

Related Articles

Article Metrics

Article Access Statistics



[Return to top]
Sustainability EISSN 2071-1050 Published by MDPI AG, Basel, Switzerland RSS E-Mail Table of Contents Alert
Back to Top