Next Article in Journal
A New Superhard Phase and Physical Properties of ZrB3 from First-Principles Calculations
Next Article in Special Issue
Deformation Behavior of Recycled Concrete Aggregate during Cyclic and Dynamic Loading Laboratory Tests
Previous Article in Journal
Identification of Material Parameters for the Simulation of Acoustic Absorption of Fouled Sintered Fiber Felts
Previous Article in Special Issue
Characterization of Aluminum-Based-Surface Matrix Composites with Iron and Iron Oxide Fabricated by Friction Stir Processing
 
 

Order Article Reprints

Journal: Materials, 2016
Volume: 9
Number: 710

Article: Optimization of Injection Molding Parameters for HDPE/TiO2 Nanocomposites Fabrication with Multiple Performance Characteristics Using the Taguchi Method and Grey Relational Analysis
Authors: by Hifsa Pervez, Mohammad S. Mozumder and Abdel-Hamid I. Mourad
Link: https://www.mdpi.com/1996-1944/9/8/710

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop