Next Article in Journal
Finite Element Simulation of Hot Rolling for Large-Scale AISI 430 Ferritic Stainless-Steel Slabs Using Industrial Rolling Schedules—Part 2: Simulation of the Roughing Stage and Comparison with Experimental Results
Next Article in Special Issue
Additive Manufacturing and Influencing Factors of Lattice Structures: A Review
Previous Article in Journal
Finite Element Analysis of a 3D-Printed Acetabular Prosthesis for an Acetabular Defect According to the Paprosky Classification
Previous Article in Special Issue
Can the Dimensional Optimisation of 3D FDM-Manufactured Parts Be a Solution for a Correct Design?
 
 

Order Article Reprints

Journal: Materials, 2025
Volume: 18
Number: 1296

Article: Redesign of a Flange Wheel Used in an Airplane for Composite Manufacturing Made with a Mold with Removable Inserts Manufactured by Means of 3D Printing: A Comparison with the Current Conventional Alternative, a Turbine Wheel Machined out of Aluminum
Authors: by Carlos Javierre, Víctor Camañes, Julio Vidal, José Antonio Dieste and Angel Fernandez
Link: https://www.mdpi.com/1996-1944/18/6/1296

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop