Next Article in Journal
Effects of Aggregate Size and Nozzle Diameter on Printability and Mechanical Properties of 3D Printed Ferronickel Slag–GGBFS Concrete
Next Article in Special Issue
Analysis of the Mechanical Properties of the AlSi7CrMnCu2.5 Alloy and Their Changes After Heat Treatment
Previous Article in Journal
Potential Utilization of End-of-Life Vehicle Carpet Waste in Subfloor Mortars: Incorporation into Portland Cement Matrices
Previous Article in Special Issue
Effects of Annealing Processes on Microstructure and Properties of FeNi-Based Amorphous Alloy
 
 
Article

Article Versions Notes

Materials 2025, 18(15), 3679; https://doi.org/10.3390/ma18153679
Action Date Notes Link
article pdf uploaded. 5 August 2025 15:58 CEST Version of Record https://www.mdpi.com/1996-1944/18/15/3679/pdf-vor
article supplementary file uploaded. 5 August 2025 15:58 CEST - https://www.mdpi.com/1996-1944/18/15/3679#supplementary
article xml file uploaded 6 August 2025 09:05 CEST Original file -
article xml uploaded. 6 August 2025 09:05 CEST Update https://www.mdpi.com/1996-1944/18/15/3679/xml
article pdf uploaded. 6 August 2025 09:05 CEST Updated version of record https://www.mdpi.com/1996-1944/18/15/3679/pdf
article html file updated 6 August 2025 09:07 CEST Original file https://www.mdpi.com/1996-1944/18/15/3679/html
Back to TopTop