Next Article in Journal
Effect of Er Microalloying and Zn/Mg Ratio on Dry Sliding Wear Properties of Al-Zn-Mg Alloy
Next Article in Special Issue
Optimal D-Shaped Toolpath Design for Minimizing X-Axis Servo Following Error in Turning the Off-Axis Optical Surfaces
Previous Article in Journal
Research on the Grinding Quality Evaluation of Composite Materials Based on Multi-Scale Texture Fusion Analysis
Previous Article in Special Issue
Analysis of Selected Spark Plasma Sintering Parameters on the Mechanical Properties of Sintered X30Cr13 Steel
 
 
Review

Article Versions Notes

Materials 2025, 18(15), 3539; https://doi.org/10.3390/ma18153539
Action Date Notes Link
article xml file uploaded 28 July 2025 16:38 CEST Original file -
article xml uploaded. 28 July 2025 16:38 CEST Update -
article pdf uploaded. 28 July 2025 16:39 CEST Version of Record https://www.mdpi.com/1996-1944/18/15/3539/pdf-vor
article html file updated 28 July 2025 16:40 CEST Original file -
article xml file uploaded 31 July 2025 07:56 CEST Update -
article xml uploaded. 31 July 2025 07:57 CEST Update https://www.mdpi.com/1996-1944/18/15/3539/xml
article pdf uploaded. 31 July 2025 07:57 CEST Updated version of record https://www.mdpi.com/1996-1944/18/15/3539/pdf
article html file updated 31 July 2025 07:58 CEST Update -
article html file updated 28 August 2025 09:06 CEST Update -
article html file updated 15 September 2025 08:43 CEST Update -
article html file updated 24 September 2025 19:16 CEST Update https://www.mdpi.com/1996-1944/18/15/3539/html
Back to TopTop