Article Versions Notes

Wawrzyniak P, Karaszewski W, Safandowska M, Idczak R. Effect of rPET Content and Preform Heating/Cooling Conditions in the Stretch Blow Molding Process on Microcavitation and Solid-State Post-Condensation of vPET-rPET Blend: Part II—Statistical Analysis and Interpretation of Tests. Materials. 2025; 18(1):36. https://doi.org/10.3390/ma18010036

Wawrzyniak, Paweł, Waldemar Karaszewski, Marta Safandowska, and Rafał Idczak. 2025. "Effect of rPET Content and Preform Heating/Cooling Conditions in the Stretch Blow Molding Process on Microcavitation and Solid-State Post-Condensation of vPET-rPET Blend: Part II—Statistical Analysis and Interpretation of Tests" Materials 18, no. 1: 36. https://doi.org/10.3390/ma18010036

Wawrzyniak, P., Karaszewski, W., Safandowska, M., & Idczak, R. (2025). Effect of rPET Content and Preform Heating/Cooling Conditions in the Stretch Blow Molding Process on Microcavitation and Solid-State Post-Condensation of vPET-rPET Blend: Part II—Statistical Analysis and Interpretation of Tests. Materials, 18(1), 36. https://doi.org/10.3390/ma18010036